Abstract:Firstly, this paper presents an overview of DoD code [1] against progressive collapse and points out the shortcomings of the current design approaches. After that, seven experimental tests of common types of bolted steel beam-column joints under a middle-column removal scenario are presented. This study provides the behaviour and failure modes of different types of connections, including their resistances and rotational capacities in catenary action. The test results indicate that the web cleat connection has the best performance in the development of catenary action. The flush end plate, fin plate and top and seat with web angle (TSWA) connections could also deform in a ductile manner and develop catenary action prior to failure. Numerical simulations have also been conducted. Both static and explicit dynamic solvers were employed to overcome problems of non-convergence, contact, large deformation and fracture simulations. It is demonstrated that the finite element analyses give reasonable accuracy compared to the test results. In addition, an extensive parametric study was undertaken using these validated models to obtain the rotation capacities of various types of connections under catenary action. Finally, some practical design implications have been drawn up from the experimental tests and the parametric study. A new tying resistance expression is proposed to consider the effect of large rotation. If large rotation capacity is not considered in the design stage, the joints with poor rotation capacities would fail to achieve the design tying resistances. In addition, four new connection acceptance criteria of rotation capacities have been proposed to incorporate catenary action under a middle column removal scenario. The work shows that current acceptance criteria of rotation capacities for steel joints such as web cleat, fin plate, flush end plate and TSWA connections, are probably too conservative as they only consider pure flexural resistance.

Performance analysis of steel frame joints reinforced against progressive collapse by partially-penetrated butt-welded corrugated steel plates

Novel joint for improving the collapse resistance of steel frame structures in column-loss scenarios

Experimental Research on Seismic Behavior of Reinforced Concrete Column-to-Steel Beam Joints with Bolted End-plate

Progressive Collapse Behaviour of Steel Framed Substructures with Various Beam-Column Connections

A novel composite joint with corrugated web and cover plates for simultaneously improving anti-collapse resistance and seismic behavior

Enhancing collapse-resistance of steel frame joints based on folded axillary plates

Seismic Performance of Corroded Prefabricated Column-Footing Joint with Grouted Splice Sleeve Connection: Experiment and Simulation

Experimental Study on Axial Compressive Behavior of Concrete-Filled Corrugated Steel Tubular Columns

Performance of Different Stiffness Connections Against Progressive Collapse

Progressive Collapse Mechanism Analysis of Concrete-Filled Square Steel Tubular Column to Steel Beam Joint with Bolted–Welded Hybrid Connection

Numerical study on the anti-progressive collapse performance of steel frame-steel plate shear wall structures

Progressive Collapse Analysis of Concrete-Filled Steel Tubular Frames with Semi-Rigid Connections

Behaviour of Different Types of Steel Connections in Steel Frames Against Progressive Collapse

Component Tests and Numerical Simulations of 3D Steel Frame Structures for Progressive Collapse

Progressive collapse analysis of precast reinforced concrete beam-column assemblies with different dry connections

Anti-progressive collapse performance analysis of different configurations ring plate connection between concrete-filled steel tubular column and H-steel beam

Anti-collapse performance of concrete-filled steel tubular composite frame with assembled tensile steel brace under middle column removal

Experimental Study on Seismic Behaviour of Cover-Plate Joints in High Strength Steel Frames

Progressive Collapse Analysis of Concrete-filled Steel Tubular Column to Steel Beam Connections Using Multi-scale Model

Analysis of Robustness of Steel Frames Against Progressive Collapse

Anti-collapse Performances of Steel Beam-to-column Assemblies with Different Span Ratios