Abstract:Based on heat conduction theory,a finite element method is introduced to investigate the three-dimensional transient temperature fields in a moving plate irradiated by a laser beam.The laser beam is assumed to be with Gaussian distribution,and the plate is considered as infinite along the motion direction,while the width and the height are finite.Considering the thermal physical parameters depended on temperature,convection and radiation factors of the surfaces,and the motion of the plate,the temperature fields on the upper and bottom surfaces of the plate are obtained.The numerical results show that the quasi-steady state temperature fields are approached.Comparing the temperature fields obtained by before and after considering the factors described above,it shows that the temperature dependences of the thermal properties of the material have distinct influences on the temperature fields.In the conditions that the thermal conductivity and thermal capacity of the material are dependent of temperature,the results are presented for two cases:(1) when neglecting temperature dependence of the thermal capacity,the maximum temperature and the quasi-steady state temperature are both higher than those of considering the temperature dependence;(2) when neglecting temperature dependence of the thermal conductivity,the maximum temperature will decrease while the quasi-steady state temperature will be the same as that of considering the temperature dependence.In addition,with increasing the convective heat transfer coefficient at the upper surface,the maximum temperature and the quasi-steady state temperature will decrease,while the effect of radiative heat losses of the surface can be ignored.Meanwhile,changing the moving velocity not only affects the temperature fields,but also alters the maximum temperature and the time for reaching the quasi-steady state condition.Furthermore,with the radius of the laser source decreasing,the maximum temperature and quasi-steady state temperature will both increase,while the former change is more obvious.

Study on similarity criterion for fluid-thermal coupling responses of metal plate simultaneously exposed to laser irradiation and airflow

Similarity criterions of heat transfer for oscillating flow

Finite element analyses of temperature fields in moving solids irradiated by a laser source

Simulation and experimental study on temperature field and flow field of laser cladding high-temperature Ni-based alloys

Three-Dimensional Numerical Study on Temperature Field of Laser Bending of Sheet Metal

Study on coupled heat transfer model and enhanced heat transfer law of liquid metals and supercritical fluids

Experimental validation of a quasi-transient coupling approach for the modeling of heat transfer in autoclave processing

Simulations of Temperature in Disk-Type Laser with Fluid–Solid Interaction

Thermal scale modeling of radiation-convection system in micro-gravity environment

Efficient Finite Element Analysis/Computational Fluid Dynamics Thermal Coupling for Engineering Applications

Coupled Flow-Thermal-Structural Analysis of Hypersonic Aerodynamically Heated Cylindrical Leading Edge

Thermal Circuit Modeling and Numerical Verification for Concurrent Fluid Flows through an Iso-Flux Heated Concentric Double Tube

Numerical Simulation Of Heat And Mass Transfer In Air-Water Direct Contact Using Computational Fluid Dynamics

Numerical Simulation of Temperature Field in Multilayer Heterogeneity Lamination Laser Soldering

Numerical simulation and experiment of laminar heat transfer characteristics in micro-channel collector

Interfacial Heat Transfer Characteristics and Thermal Expansion Behavior of Heterostructure Materials in Arc-Heated Wind Tunnel

Study on Temperature Distribution of Disk-Type Laser Based on Heat-Fluid-Solid Multiphysics Coupling Method

Numerical simulation and experimental study on the evolution of multi-field coupling in laser cladding process by disk lasers

Similarity design method for dynamic characteristics of rotating composite blades in thermal environment

Dynamic simulation of nozzle structure based on thermal-fluid-solid coupling analysis

Numerical Simulation of Metal Sheet Damage under High-Speed Tangential Airflow and Laser Irradiation