Abstract:Magnesium (Mg) and its alloys offer great potential for reducing vehicular mass and energy consumption due to their inherently low densities. Historically, widespread applicability has been limited by low strength properties compared to other structural Al-, Ti- and Fe-based alloys. However, recent studies have demonstrated high-specific-strength in a number of nanocrystalline Mg-alloys. Even so, applications of these alloys would be restricted to low-temperature automotive components due to microstructural instability under high temperature creep loading. Hence, this work aims to gain a better understanding of creep and associated deformation behavior of columnar nanocrystalline Mg and Mg-yttrium (Y) (up to 3at.%Y(10wt.%Y)) with a grain size of 5 nm and 10 nm. Using molecular dynamics (MD) simulations, nanocrystalline magnesium with and without local concentrations of yttrium is subjected to constant-stress loading ranging from 0 to 500 MPa at different initial temperatures ranging from 473 to 723 K. In pure Mg, the analyses of the diffusion coefficient and energy barrier reveal that at lower temperatures (i.e., T < ~423K) the contribution of grain boundary diffusion to the overall creep deformation is stronger that the contribution of lattice diffusion. However, at higher temperatures (T > ~423K) lattice diffusion dominates the overall creep behavior. Interestingly, for the first time, we have shown that the(101-1),(101-2),(101-3) and (101-6) boundary sliding energy is reduced with the addition of yttrium. This softening effect in the presence of yttrium suggests that the experimentally observed high temperature beneficial effects of yttrium addition is likely to be attributed to some combination of other reported creep strengthening mechanisms or phenomena such as formation of stable yttrium oxides at grain boundaries or increased forest dislocation-based hardening.

The effect of Y and Nd additions on the microstructure and creep behavior of AZ80

Effects of Y, Gd on Microstructure and Mechanical Properties of AZ61 Magnesium Alloy

Effect of substituting Gd with 3 wt.% Nd on high temperature creep behaviors of peak-aged Mg-10Gd-0.4Zr casting Mg alloy

Atomic-scale investigation of creep behavior in nanocrystalline Mg and Mg-Y alloys

Multi-microalloying mediated grain growth and texture evolution during the high-temperature static recrystallization of AZ80 alloys

Effect of nano-Y2O3 addition on the creep behavior of an as-cast near-α titanium alloy

Tensile creep behaviors of Mg-10Gd-0.4Zr alloy under the different applied stresses at 260 °C

Unveiling the Collaborative Effects of Static Precipitation and Precipitate-Free Zone on the Compressive Creep Behaviors of Mg-10.5wt%Y Binary Alloy

Microstructural evolution of Mg–14Gd–0.4Zr alloy during compressive creep

Anisotropy in the tensile creep behaviors of a hot-rolled Mg-5.5wt%Y alloy sheet

Compressive creep behavior of extruded Mg-4Sm-2Yb-0.6Zn-0.4Zr alloy

Understanding solid solution strengthening at elevated temperatures in a creep-resistant Mg–Gd–Ca alloy

Tensile creep behaviors of Mg-10Gd-0.4Zr alloy in different heat treatment states

High-Temperature Creep Behavior of Mg-9Gd-2Nd-1Ca-0.5Zr Alloy

Influence of heat treatment and pre-straining on dynamic precipitation and creep behavior of AZ91-0.5Y magnesium alloys

Yttrium effect on 475 °C brittleness of Fe–13Cr–6Al–2Mo-0.5Nb-0.15Zr alloy

Microstructure Evolution and Creep Behavior of High-Pressure Die-Cast Mg–9Al–1Zn–1Sr Alloy

Microstructure and Mechanical Properties of Extruded Mg-Zn-Nd-Y-Zr-Ca Alloy

Effect of yttrium addition on dynamic mechanical properties, microstructure, and fracture behavior of extrusion-shear ZC61 + xY (x = 0, 1, 2, 3) alloys

Opposite effects of Zn addition on the creep resistance at low and high temperatures for as-cast Mg-15Gd alloy

Enhancing the creep resistance of a dilute Mg-1.5 wt%Nd alloy plate via pre-compression and subsequent peak-aging