Abstract:All-carbon flexible supercapacitors are highly promising in powering up wearable electronics in smart textiles. However, their low energy density hinders their practical application due to the lack of an effective fabrication method of highly conductive fiber electrodes with high specific capacitance. Herein, we develop a sustainable, scalable, and cost-effective method to fabricate lignin-based carbon/graphene fiber (GF) hybrid electrodes with a hierarchically porous structure. This engineered structure is achieved by coaxially wet spinning a graphene oxide fiber (GOF) as a core structural support and 0–10% lignin/graphene oxide (GO) as a surface layer, followed by carbonization and KOH activation processes. The obtained fiber electrodes exhibit the highest specific capacitance of 260.48 mF cm–2 at a current density of 0.1 mA cm–2, which is 11 times that of the neat GF from conventional wet spinning. The entire-device energy density of the assembled fiber-based flexible supercapacitors from the optimal fiber electrode is 5.79 μW h cm–2 in a H2SO4/poly(vinyl alcohol) electrolyte. Furthermore, the fiber-based flexible supercapacitors show ultralong cycling life and cycling stability (the capacitance retention rate is 98% after 7000 cycles of charge/discharge at a current density of 0.1 mA cm–2). This work enables the high-value utilization of low-cost carbon precursors (lignin and GO) in potential applications such as energy storage devices for smart textiles.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsaem.1c01379.Polarized optical microscopy image of GO solution at 15 mg mL–1; SEM images of the neat GF and unactivated 5% ; FTIR images of the GOF and GF; CV and GCD curves of the GF, unactivated 5% recorded at 5 mV s–1 and 0.1 mA cm–2; CV and GCD curves of flexible supercapacitors tested in a 2-electrode cell in 1 M H2SO4/PVA electrolyte of 0–10% ; electrical conductivity of ; calculated CA, CV, Esingle,A, and Psingle,A values of fiber electrodes based on GCD curves at a current density of 0.1 mA cm–2; calculated CA of fiber electrodes at different scan rates based on CV measurements; and calculated CA of fiber electrodes at current densities based on GCD measurements (PDF)This article has not yet been cited by other publications.

Boosting storage properties of reduced graphene oxide fiber modified with MOFs-derived porous carbon through a wet-spinning fiber strategy

Mn0.5co2.5o4 Nanofibers Sandwiched in Graphene Sheets for Efficient Supercapacitor Electrode Materials

Boosting the Energy Storage Densities of Supercapacitors by Incorporating N-doped Graphene Quantum Dots into Cubic Porous Carbon

Boosting Lithium Storage Properties of MOF Derivatives Through a Wet-Spinning Assembled Fiber Strategy.

Electrochemically Exfoliated Graphene Oxide Enhanced Hybrid Fibers with High Rate Performance for Fibrous Supercapacitors

Hierarchical Construction of High-Performance All-Carbon Flexible Fiber Supercapacitors with Graphene Hydrogel and Nitrogen-Doped Graphene Quantum Dots

Embedding Metal–Organic Frameworks for the Design of Flexible Hybrid Supercapacitors by Electrospinning: Synthesis of Highly Graphitized Carbon Nanofibers Containing Metal Oxide Nanoparticles

One-step wet-spinning assembly of twisting-structured graphene/carbon nanotube fiber supercapacitor

Simple Mixed-Acid-Treated Carbon Fiber Electrodes with Oxygen-Containing Functional Groups for Flexible Supercapacitors

Sustainable Fe-MOF@carbon nanocomposite electrode for supercapacitor

Three-Dimensionally Conducting Network in Graphene-Based Composite Fibers toward Enhanced Electrochemical and Toughness Performance in Fibrous Supercapacitors

Microfluidic Spinning of Core–Shell Α-Mno2@graphene Fibers with Porous Network Structure for All-Solid-State Flexible Supercapacitors

Electrochemical Performance of Flexible Graphene-Based Fibers As Electrodes for Wearable Supercapacitors

Free-standing Reduced Graphene Oxide/MoO3-x Composite Film with High Performance for Flexible Supercapacitors

Electrochemical Performance of Coaxially Wet-Spun Hierarchically Porous Lignin-Based Carbon/Graphene Fiber Electrodes for Flexible Supercapacitors

Hierarchical Ferric-Cobalt-nickel Ternary Oxide Nanowire Arrays Supported on Graphene Fibers As High-Performance Electrodes for Flexible Asymmetric Supercapacitors

Reduced graphene oxide/g-C 3 N 4 modified carbon fibers for high performance fiber supercapacitors

In-situ Growth of N-doped Graphene-Like Carbon/mof Nanocomposites for High-Performance Supercapacitor

Interface-engineered Molybdenum Disulfide/porous Graphene Microfiber for High Electrochemical Energy Storage

Flexible and freestanding MoS2/rGO/CNT hybrid fibers for high-capacity all-solid supercapacitors

Activated Carbon Fibers with Manganese Dioxide Coating for Flexible Fiber Supercapacitors with High Capacitive Performance