Abstract:Flexible fiber-type solid-state supercapacitors (FSCs) are demanded for energy storage of wearable soft electronics. A flexible carbon fiber (CF) with high electrical conductivity and good energy storage ability can act as the current collector and the active material simultaneously. Improving the energy storage ability of the CF without depositing active materials is highly promising to avoid active materials from peeling off, especially under bending conditions. In this study, the CF is treated with acid mixtures containing different HNO3 to H2SO4 ratios. The roughened surface and the production of graphene quantum dots and functional groups are achieved for the acid-treated CF, especially for the CF treated with the acid mixtures. The largely enhanced specific capacitance (CL) is first obtained for the optimized CF electrode (641.08 mF/cm at 5 mV/s) treated with the acid mixture containing the HNO3 to H2SO4 ratio of 1 to 3. The FSC also shows a maximum energy density of 16.57 μW h/cm at the power density of 62.50 μW/cm, as well as a CL retention of 77% and Coulombic efficiency of 100% in 5000 times of a charge/discharge cycling process. Excellent flexibility is also attained for the FSC with no shape distortion of cyclic voltammetry curves measured under the bending angle of 180° and with 1000 times of repeated bending. This work proposes a simple acid treatment to largely enhance the energy storage ability of pure CF electrodes. The bifunctional substance with current collecting and energy storing abilities is expected to be well developed in the future for applying on numerous efficient flexible energy storage devices.

Activated Carbon Fibers with Manganese Dioxide Coating for Flexible Fiber Supercapacitors with High Capacitive Performance

Mn0.5co2.5o4 Nanofibers Sandwiched in Graphene Sheets for Efficient Supercapacitor Electrode Materials

Facile Activation of Commercial Carbon Felt As a Low-Cost Free-Standing Electrode for Flexible Supercapacitors

Nanocellulose/carbon nanotube/manganese dioxide composite electrodes with high mass loadings for flexible supercapacitors

Monocrystalline FeMnO3 on Carbon Cloth for Extremely High-Areal-Capacitance Supercapacitors

Hierarchical Construction of High-Performance All-Carbon Flexible Fiber Supercapacitors with Graphene Hydrogel and Nitrogen-Doped Graphene Quantum Dots

Flexible All-Fiber Electrospun Supercapacitor

MnO2/porous Carbon Film/ni Electrodes with High-Quality Interface for High Rate and Performance Flexible Supercapacitors

Comprehensive Approaches to Three-Dimensional Flexible Supercapacitor Electrodes Based on MnO2/carbon Nanotube/activated Carbon Fiber Felt

Hierarchical Ferric-Cobalt-nickel Ternary Oxide Nanowire Arrays Supported on Graphene Fibers As High-Performance Electrodes for Flexible Asymmetric Supercapacitors

Activated carbon fiber yarns with birnessite-type MnO2 and oxygen-functional groups for high-performance flexible asymmetric supercapacitors

Enhanced Surface Area, Graphene Quantum Dots, and Functional Groups for the Simple Acid-Treated Carbon Fiber Electrode of Flexible Fiber-Type Solid-State Supercapacitors without Active Materials

Ultrafine Carbon-Nanofiber-Reinforced Graphene Fiber Electrodes for Flexible Supercapacitors with High Specific Capacitance and Durable Cycle Stability

Simple Mixed-Acid-Treated Carbon Fiber Electrodes with Oxygen-Containing Functional Groups for Flexible Supercapacitors

High-Performance Flexible Asymmetric Fiber-Shaped Supercapacitor Based on CF/PPy and CNT/MnO2 Composite Electrodes

A Stretchable, Asymmetric, Coaxial Fiber-Shaped Supercapacitor for Wearable Electronics

Bottom-Up Fabrication of Activated Carbon Fiber for All-Solid-State Supercapacitor with Excellent Electrochemical Performance.

Electrodes Derived from Carbon Fiber-Reinforced Cellulose Nanofiber/Multiwalled Carbon Nanotube Hybrid Aerogels for High-Energy Flexible Asymmetric Supercapacitors

Fabrication of uniform MnO2 layer-modified activated carbon cloth for high-performance flexible quasi-solid-state asymmetric supercapacitor

Enhancing the performance of quasi-solid-state flexible supercapacitors with Ag and MnO 2 co-decorated carbon nanofibrous electrodes

Flexible and freestanding MoS2/rGO/CNT hybrid fibers for high-capacity all-solid supercapacitors