Abstract:This paper introduces a compact picosecond laser system using tapered double cladding fiber-single crystal fiber hybrid amplification technology for the first time. By modifying the Ginzburg-Landau equation, we established a simulation model and designed a passive mode-locked picosecond oscillator based on a semiconductor saturable absorber mirror. The oscillator outputs laser with a pulse width of 7.75 ps, a center wavelength of 1030.55 nm, and a spectrum width of 0.58 nm. The seed laser is stretched and amplified by the all-fiber front stage, and then injected into the tapered double cladding fiber-single crystal fiber hybrid amplifier. The laser power is amplified from 820 mw to 103.1 W, obtaining a gain of 21 dB. We used zero-phonon line pumping technology in single crystal fiber amplifier to reduce the thermal effects caused by quantum loss, thereby increasing the length of the crystal and increasing the power loading capacity. We designed a single crystal fiber amplification module using Yb:YAG with 60 mm long, 1 mm diameter and a 1 at.% doping rate for the first time. Finally a hundred-watt level picosecond laser output with a repetition frequency of 26.33 MHz, an average power of 103.1 W, a pulse width of 244.72 ps, a spectrum width of 1.16 nm, and a beam quality of M2 x = 1.368 and M2 y = 1.511 was obtained. To the best of our knowledge, this is the highest picosecond laser output power for an all-fiber front-stage combined with a single-stage single crystal fiber amplifier.

Sub-Nanosecond Raman Fiber Amplifier Based Red-Orange Light Source

Fiber-solid, Hybrid, Single-Frequency Laser (100 W) with a 100 MHz Repetition Rate and 1 Ns Pulse Width from a Spherical Aberration Compensated Four-Stage Nd:YVO4 Amplifier

Femtosecond Red and Near-Infrared Lasers Due to Cascaded-Raman-Assisted Four-Wave Mixing in a Nonlinear Yb-Doped Fiber Amplifier

589 nm laser generation by frequency doubling of a single-frequency Raman fiber amplifier in PPSLT.

Sub-Nanosecond Passively Q-Switched Yellow and Orange Raman Lasers

More Than 200 W Random Raman Fiber Laser with Ultra-Short Cavity Length Based on Phosphosilicate Fiber

Nanosecond pulse pumped, fiber-integrated narrow linewidth linearly polarized Raman amplifier at 1120 nm

Hundred Nano-Joules Polarization-Maintaining Yb-Doped Fiber Femtosecond Laser Amplification System

Amplification of Random Lasing Enables a 10-Kw-level High-Spectral-purity Yb-Raman Fiber Laser

Sub-60-fs, Compact 1100-Nm Fiber Laser System Based on Double-Pass Pre-Chirp Managed Amplification.

A 12 Mj 11 Ns Spectrally Narrow Fiber Amplifier with A Pulsed Pump

Extreme Raman red shift: ultrafast multimode non-linear space-time dynamics, pulse compression, and broadly tunable frequency conversion

Towards A Tunable Fiber Source for Coherent Raman Imaging

Watt-level all polarization-maintaining femtosecond fiber laser source at 1100 nm for multicolor two-photon fluorescence excitation of fluorescent proteins

Kilowatt-level Yb-Raman fiber amplifier with narrow-linewidth and near-diffraction-limited beam quality

High-performance Fiber Parametric Oscillator for Coherent Raman Microscopy

Fiber four-wave mixing source for coherent anti-Stokes Raman scattering microscopy.

Dual-wavelength bidirectional pumped high-power Raman fiber laser

High Peak-Power and Narrow-Linewidth All-Fiber Raman Nanosecond Laser in 1.65 Μm Waveband.

Amplification of 1.08 GHz Repetition Rate Femtosecond Laser Pulses to 97 W Average Power by a Fiber Amplifier

Compact hundred-watt level picosecond laser system based on tapered double cladding fiber-single crystal fiber hybrid amplifier