Abstract:P2-type layered oxides are considered as promising cathode materials for rechargeable sodium ion batteries, but preparing P2-type cathodes with high-operating voltage and long-life is still a big challenge. Herein, spherical P2-type cathode Na0.67Ni0.17Co0.17Mn0.66Ti0.05Mg0.05O2 has been designed, and the critical roles of Ti and Mg on electrochemical performance of the cathodes are systematically investigated. The high-temperature XRD clearly exhibits the forming process of the pure phase material and suggests that the most suitable calcination temperature is 850 °C. The Ti/Mg cosubstitution does not break the long-range P2 structure and the spherical morphology of the material. In the electrochemical processes, the Na0.67Ni0.17Co0.17Mn0.56Ti0.05Mg0.05O2 electrode exhibits better electrochemical performance than that of the undoped Na0.67Ni0.17Co0.17Mn0.66O2. It delivers an initial reversible capacity of 151 mAh g–1 (2–4.5 V) with an average voltage of 3.8 V and exhibits a high capacity retention of 87.7% after 300 cycles at 100 mA g–1. The improved electrochemical performance benefits from the Ti/Mg cosubstitution; Ti improves the average voltage while Mg and Ti significantly mitigate the undesired P2 → O2 phase transition of the cathode, and these two elements jointly promote the development of the electrochemical performance. This strategy is also applicable to the optimization design of layered transition oxides and provides a new approach to prepare high-voltage, long-life cathodes for sodium ion batteries.This article has not yet been cited by other publications.

Stabilizing P3‐Type Oxides as Cathodes for High‐Rate and Long‐Life Sodium Ion Batteries by Disordered Distribution of Transition Metals

Electrochemical performance and structural stability of air-stable Na0.67Ni0.33Mn0.67-xTixO2 cathode materials for high-performance sodium-ion batteries

Stable Electrochemical Properties of Titanium Doped LayeredP2-Type Na0.67Ni0.15 Mn0.85O2 Cathode Material for Sodium IonBatteriesH

Achieving High Stability and Performance in P2‐Type Mn‐Based Layered Oxides with Tetravalent Cations for Sodium‐Ion Batteries

High-Operating Voltage, Long-Life Layered Oxides for Sodium Ion Batteries Enabled by Cosubstitution of Titanium and Magnesium

Ti4+ Substitution Suppressing P2-O2 Phase Transition to Construct Stable P2-Na0.67ni0.33mn0.67o2 Cathode for Long-Term Durable Sodium-Ion Batteries

A Queue‐Ordered Layered Mn‐Based Oxides with Al Substitution as High‐Rate and High‐Stabilized Cathode for Sodium‐Ion Batteries

A Stable Layered Oxide Cathode Material for High‐Performance Sodium‐Ion Battery

Structural Aspects of P2‐Type Na 0.67 Mn 0.6 Ni 0.2 Li 0.2 O 2 (MNL) Stabilization by Lithium Defects as a Cathode Material for Sodium‐Ion Batteries

P3/O3 Integrated Layered Oxide as High‐Power and Long‐Life Cathode toward Na‐Ion Batteries

Single-Crystal P2-Na0.67Mn0.67Ni0.33O2 Cathode Material with Improved Cycling Stability for Sodium-Ion Batteries

Improving the stability of P2-type NaMn2/3Ni1/3O2 via phasic intergrowth induced by Li-ion substitution

An Utrastable Mg/Zr Modified P2‐Type Na2/3Ni1/3Mn2/3O2 Cathode Material for High‐Power Sodium‐Ion Batteries

P3 Na<sub>0.9</sub>Ni<sub>0.5</sub>Mn<sub>0.5</sub>O<sub>2</sub> Cathode Material for Sodium Ion Batteries

Manipulating Stable Layered P2‐Type Cathode via a Co‐Substitution Strategy for High Performance Sodium Ion Batteries

Air-Stable High-Entropy Layered Oxide Cathode with Enhanced Cycling Stability for Sodium-Ion Batteries

P3‐Na0.45Ni0.2Mn0.8O2/Na2SeO4 Heterostructure Enabling Long‐Life and High‐Rate Sodium‐Ion Batteries

Stabilized O3-Type Layered Sodium Oxides with Enhanced Rate Performance and Cycling Stability by Dual-Site Ti<SUP>4+</SUP>/K<SUP>+</SUP> Substitution

Construction of environmental-stable and high-rate layered oxide cathodes for sodium-ion batteries

Na+/vacancy Disordering Promises High-Rate Na-ion Batteries