Abstract:Exploiting high-performance cathodes is still in need for sodium-ion batteries, which is critical to promote their commercialization. Layered sodium manganese oxide cathodes show low cost and natural abundance but suffer from poor cycling life and rate capacity. Herein, electrochemically inert Ti4+ and active Ni2+ are used to replace some Mn ions in Na0.62MnO2, and neutron power diffraction results demonstrate a negligible change in the sizes of the metal layer and Na-ion layer in the structure. Although Na0.62[Ni0.12Ti0.12Mn0.76]O2 and Na0.62MnO2 share the same Na content in pristine materials and theoretical capacity, the improved performance of Na0.62[Ni0.12Ti0.12Mn0.76]O2 stems from the suppressed phase transitions and ordering process, alleviated Jahn–Teller distortion, and a high Na utilization of 73.8% compared with 62.2% for Na0.62MnO2. Ti4+ stabilizes the crystal structure and hinders the multiple phase transitions and Na+/vacancy ordering upon cycling, and Ni2+ improves the working voltage and compensates the capacity loss associated with decreased Mn3+ content. Na0.62[Ni0.12Ti0.12Mn0.76]O2 exhibits an average working voltage of about 3.5 V, a great rate capability, and cycling stability of 76.8% capacity retention after 120 cycles in the voltage range of 2.5–4.5 V. The work offers an insight into enhancing advanced layered sodium manganese oxide cathode materials for sodium-ion batteries.This article has not yet been cited by other publications.

Construction of environmental-stable and high-rate layered oxide cathodes for sodium-ion batteries

La-doped O3-type Layered Oxide Cathode with Enhanced Cycle Stability for Sodium-Ion Batteries

Electrochemical performance and structural stability of air-stable Na0.67Ni0.33Mn0.67-xTixO2 cathode materials for high-performance sodium-ion batteries

Na 2/3 Li 1/9 [Ni 2/9 Li 1/9 Mn 2/3 ]O 2 : A High-Performance Solid-Solution Reaction Layered Oxide Cathode Material for Sodium-Ion Batteries

A highly stable high-energy layered oxide cathode for rechargeable sodium ion batteries

Air-Stable High-Entropy Layered Oxide Cathode with Enhanced Cycling Stability for Sodium-Ion Batteries

Complementary Effect of Ti and Ni Incorporation in Improving the Electrochemical Performance of a Layered Sodium Manganese Oxide Cathode for Sodium-Ion Batteries

Realizing long-term cycling stability of O3-type layered oxide cathodes for sodium-ion batteries

Stable Electrochemical Properties of Titanium Doped LayeredP2-Type Na0.67Ni0.15 Mn0.85O2 Cathode Material for Sodium IonBatteriesH

Improving the stability of P2-type NaMn2/3Ni1/3O2 via phasic intergrowth induced by Li-ion substitution

Ternary-phase layered cathodes toward ultra-stable and high-rate sodium ion storage

Trace Ti/Mg Co-Doped O3-type Layered Oxide Cathodes with Enhanced Kinetics and Stability for Sodium-Ion Batteries

High‐Entropy and Superstructure‐Stabilized Layered Oxide Cathodes for Sodium‐Ion Batteries

An air-stable single-crystal layered oxide cathode based on multifunctional structural modulation for high-energy-density sodium-ion batteries

Modulating Valence Electrons and Na Occupancy in Layered Cathodes for High-Performance Na-Ion Batteries

Suppression of Adverse Phase Transition of Layered Oxide Cathode via Local Electronic Structure Regulation for High-Capacity Sodium-Ion Batteries

Improving High-Voltage Cycling Stability and High-Rate Capability of Sodium-Ion Layered Cathode Oxides through Trace Amounts of Low-Valence Metals

Achieving complete solid-solution reaction in layered cathodes with reversible oxygen redox for high-stable sodium-ion batteries

High-Entropy Layered Oxide Cathode Materials with Moderated Interlayer Spacing and Enhanced Kinetics for Sodium-Ion Batteries

Structural Aspects of P2‐Type Na 0.67 Mn 0.6 Ni 0.2 Li 0.2 O 2 (MNL) Stabilization by Lithium Defects as a Cathode Material for Sodium‐Ion Batteries

Air-stable Manganese-Based Layered Oxide Cathode Enabled by Surface Modification and Doping Strategy for Advanced Sodium-Ion Batteries