Abstract:In recent years, P2-layered manganese-based cathodes have garnered considerable attention because of their exceptional capacity, high energy density, and facile synthesis. Nevertheless, the poor rate capability and inferior capacity retention at high discharge rates have limited their application in commercial batteries. In this work, we report a stable P2-type Na0.62K0.05Mn0.67Ni0.17Mg0.11Zn0.05O2 layered oxide cathode material with both alkali metal site doping and transition metal site doping and confirm that the synergistic effect of the K–Mg–Zn system suppresses the phase transition of P2–O2 and reduces the activation energy of interfacial charge transfer. Furthermore, the introduction of the K–Mg–Zn system results in favorable cycling stability rate performance of the sample. Specifically, the initial discharge capacity at 0.1C is measured to 140.9 mAh g–1, with a capacity retention of 95.1% after 100 cycles at 1C. Remarkably, even after 2000 cycles at 20C, the capacity retention remains at 82.8%. Ex situ X-ray photoelectron spectroscopy (XPS) analysis and the density functional theory (DFT) calculation reveal that the charge compensation during the KNMMZ charging and discharging process can be interpreted as the cooperative action of Mn3+/Mn4+ and Ni2+/Ni3+/Ni4+ redox couples in the voltage range of 2–4 V, while peaks around 4.2 V are attributed to the anionic redox action. Ex situ X-ray diffraction (XRD) analysis reveals the pronounced capability of KNMMZ to effectively suppress the P2–O2 phase transition. The complex impedance measurements and the galvanostatic intermittent titration technique validate that the K–Mg–Zn system enhances the diffusion of sodium ions. Furthermore, the full cell demonstrates outstanding cyclic electrochemical performance, underscoring its exceptional stability and durability throughout multiple charge–discharge cycles. Consequently, the P2-type Na0.62K0.05Mn0.67Ni0.17Mg0.11Zn0.05O2 system presents promising prospects for the advancement of high-energy SIBs in practical applications.

An Utrastable Mg/Zr Modified P2‐Type Na2/3Ni1/3Mn2/3O2 Cathode Material for High‐Power Sodium‐Ion Batteries

Dual‐strategy modification on P2‐Na0.67Ni0.33Mn0.67O2 realizes stable high‐voltage cathode and high energy density full cell for sodium‐ion batteries

Zinc-substituted P2-type Na0.67Ni0.23Zn0.1Mn0.67O2 cathode with improved rate capability and cyclic stability for sodium-ion storage at high voltage

Designing Water/air-Stable P2-layered Cathodes with Delayed P2–O2 Phase Transition by Composition and Structure Engineering for Sodium-Ion Batteries at High Voltage

Impurity-vibrational entropy enables quasi-zero-strain layered oxide cathodes for high-voltage sodium-ion batteries

P2-type Na2/3Ni1/3Mn2/3O2 Cathode Material with Excellent Rate and Cycling Performance for Sodium-Ion Batteries

Heteroatom-Substituted P2–Na 2/3 Ni 1/4 Mg 1/12 Mn 2/3 O 2 Cathode with {010} Exposing Facets Boost Anionic Activity and High-Rate Performance for Na-Ion Batteries

Development of lithium-free P2-type high-sodium content cathode materials with enhanced cycle and air stability for sodium-ion batteries

Semiconductor Material ZnO-Coated P2-Type Na2/3Ni1/3Mn2/3O2 Cathode Materials for Sodium-Ion Batteries with Superior Electrochemical Performance

Fast and highly reversible Na+ intercalation/extraction in Zn/Mg dual-doped P2-Na0.67MnO2 cathode material for high-performance Na-ion batteries

Tuning P2-Structured Cathode Material by Na-Site Mg Substitution for Na-Ion Batteries.

Mitigating the Large‐Volume Phase Transition of P2‐Type Cathodes by Synergetic Effect of Multiple Ions for Improved Sodium‐Ion Batteries

A Novel Pentanary Metal Oxide Cathode with P2/O3 Biphasic Structure for High‐Performance Sodium‐Ion Batteries

Enhancing Structure Stability by Mg/Cr Co‐Doped for High‐Voltage Sodium‐Ion Batteries

A dual-modification strategy for P2-type layered oxide via bulk Mg/Ti co-substitution and MgO surface coating for sodium ion batteries

Stable prismatic layer structured cathode material via Cation mixing for sodium ion battery

Electrochemical Mechanism Analysis of Dual-Site Doped on P2-Na 2/3 Ni 1/3 Mn 2/3 O 2 Enabling Anionic and Cationic Redox with Excellent Electrochemical Performance

Structural Regulation of P2‐Type Layered Oxide with Anion/Cation Codoping Strategy for Sodium‐Ion Batteries

Ca/Li Synergetic‐Doped Na0.67Ni0.33Mn0.67O2 to Realize P2‐O2 Phase Transition Suppression for High‐Performance Sodium‐Ion Batteries

High-Operating Voltage, Long-Life Layered Oxides for Sodium Ion Batteries Enabled by Cosubstitution of Titanium and Magnesium

Enabling Rapid and Stable Sodium Storage via a P2-Type Layered Cathode with High-Voltage Zero-Phase Transition Behavior