Abstract:The calculation of main circuit parameters is an important constituent part in the design of HVDC transmission projects. Each pole of the ±800 kV 7500 MW DC power transmission project from Xiluodu to Zhexi is composed of two series connected 12-pulse converters, thus the operation modes of the DC transmission project can be flexibly regulated. According to the theory of UHVDC power transmission and the features of DC system, main circuit parameters of the DC transmission project is studied and designed. Following main design parameters of converter stations at both ends of the DC transmission project are obtained from the calculation results: inductance of smoothing reactor for each pole of each station is 4×75 mH, this 4×75 mH inductance is splitted into two equal parts, one part is connected to pole bus and the other is connected to neutral bus; the converter transformers are composed of single-phase two-winding transformers, at Xiluodu side the rated capacity of each single-phase transformer is 378.5 MVA and its rated phase voltage is 171.3 kV and at Zhexi side the rated capacity of each single-phase transformer is 358.4 MVA and its rated phase voltage is 162.2 kV, the short-circuit impedances of converter transformer are 19% for both ends of the project while the tap changer is not adjusted; the number of transformer taps is set to +21/-6 at Xiluodu side and +24/-4 at Zhexi side, and voltage difference between two adjacent taps is 1.25% of the rated votlage at both sides; the absolute maximum no-load DC voltage 239.0 kV at Xiluodu side and 227.0 kV at Zhexi side. These data can be used as the foundation for subsequent research item of this project and is available for reference to other UHVDC transmission projects.

Development of Acceleration Grid Power Supply of NNBI System for CRAFT

Design and Control of the Accelerator Grid Power Supply-Conversion System Applied to CFETR N-NBI Prototype

Design of acceleration grid power supply for CFETR negative-ion-based neutral beam injection prototype

Coordination and Control Principle Between Grid-related Protection of Large-scale Nuclear Units and Security Automatic Devices of Power Grids

Conceptual design of 5 MW-NBI injector for HL-2 M tokamak

Modeling and Analysis of the Inverter Type High Voltage Power Supply with Duty Cycle Modulation

Suppression of stray electrons in the negative ion accelerator of CRAFT NNBI test facility

Beam Optics Analysis for the 120-keV Multiaperture Accelerator of Neutral Beam Injector

Engineering Design of Step-Up Transformer for Inverter Type High Voltage DC Power Supply

Physics and engineering design of 400 keV H- accelerator for negative ion based neutral beam injection system in China

Research and development progress of radio frequency ion source for neutral beam injector at ASIPP

Study and design of main circuit parameters for ±800 kv/7500 MW DC power transmission project from Xiluodu to Zhexi

Final design and manufacturing of the neutralizer for the negative ion-based neutral beam injector test facility of CRAFT

Influence of cusp magnetic field configuration on plasma parameters of radio frequency driven negative ion source for CRAFT NNBI

Structure design and analysis of RF ion source for negative ion source test facility

Physics Design of an Accelerator for an Accelerator-Driven Subcritical System

The engineering design of half-size RF negative ion source for CRAFT-NNBI

Control Integrated Studies on High Speed Permanent Magnetic Generators System

Study on stray electrons ejecting from a long-pulse negative ion source for fusion

Simulations for the cesium dynamics of the RF-driven prototype ion source for CRAFT N-NBI

High-voltage power supply for ECRH system on J-TEXT Tokamak