Abstract:Vector bending sensors can be utilized to detect the bending curvature and direction, which is essential for various applications such as structural health monitoring, mechanical deformation measurement, and shape sensing. In this work, we demonstrate a temperature-insensitive vector bending sensor via parallel Farby–Perot interferometers (FPIs) fabricated by etching and splicing a multicore fiber (MCF). The parallel FPIs made in this simple and effective way exhibit significant interferometric visibility with a fringe contrast over 20 dB in the reflection spectra, which is 6 dB larger than the previous MCF-based FPIs. And such a device exhibits a curvature sensitivity of 0.207 nm/m−1 with strong bending-direction discrimination. The curvature magnitude and orientation angle can be reconstructed through the dip wavelength shifts in two off-diagonal outer-core FPIs. The reconstruction results of nine randomly selected pairs of bending magnitudes and directions show that the average relative error of magnitude is ~4.5%, and the average absolute error of orientation angle is less than 2.0°. Furthermore, the proposed bending sensor is temperature-insensitive, with temperature at a lower sensitivity than 10 pm/°C. The fabrication simplicity, high interferometric visibility, compactness, and temperature insensitivity of the device may accelerate MCF-based FPI applications.

Cascaded multicore fiber interferometers for enhanced bending sensing based on the Vernier effect

Experimental Study and Analysis of High Sensitivity Interferometric Fiber Optic Gyroscope Using Multi-Core Fiber

Multimode Interferometer Based on a Core-Offset Singlemode-Multimode-singlemode Fiber Structure

Integrated All-Fiber Sensor for Simultaneous Measurements of Curvature and Temperature

Seven-Core Fiber Composite Structures-Based Mach-Zehnder Interferometer for Bending and Temperature Measurement

An Inline Fiber Curvature Sensor Based on Eccentric Core Fiber and Off-Axis Air Cavity Fabry-Pérot Interferometer

Cascaded-mode interferometers: spectral shape and linewidth engineering

An Integrated Fiber Michelson Interferometer Based on Twin-Core and Side-Hole Fibers for Multiparameter Sensing

High Sensitivity Strain Sensors Using Four-Core Fibers through a Corner-Core Excitation

Parallel Farby–Perot Interferometers in an Etched Multicore Fiber for Vector Bending Measurements

Research on vector bending sensors based on taper-drawn seven-core fiber Bragg grating

Sensitivity-enhanced two-dimensional bending sensor based on single-mode fiber measurement

In-Fiber Thermally Diffused Coupler and Fiber Bragg Grating Inscribed in Twin-Core Fiber for Sensitivity-Enhanced Vector Bending Sensing

Composed multicore fiber structure for direction-sensitive curvature monitoring

Sensitivity enhancement of interferometric fiber-optic accelerometers using multi-core fiber

Spatial-division Multiplexed Brillouin Distributed Sensing Based on a Heterogeneous Multicore Fiber

A Mach–Zehnder Interferometer Based on a No-Core Fiber With In-Fiber Waveguides

Multi-parameter Measurement Sensor Based on No-Core Fiber

Fibre Bragg Grating Inscription into a Seven Core Fibre and Its Application As a Vector Bending Sensor

Multiparameter measurement sensor based on no-core fiber

Compact Robust Vector Bending Sensor Based on Single Stress-Applying Fiber