Abstract:Carbon Fiber Reinforced Polymer (CFRP) is extensively utilized in the cutting-edge industries, attributed to its superior mechanical performances. The machining performance of CFRP, however, is significantly influenced by its pronounced anisotropy, particularly the fiber orientation. Consequently, Fiber Cutting Angle (FCA) is widely employed to assess the relationships between cutting geometry and machining performance, yet the coupling of cutting orientation and fiber orientation, along with the absence of feeding angle, limits the further exploration into the underlying mechanisms. This article introduced a novel geometrical framework termed "Cutting Geometry Space" (CGS), for modeling CFRP machining process. Incorporating feeding orientation, cutting orientation and fiber orientation, CGS is applied in milling process for an enhanced comprehension of cutting geometry. Additionally, a pragmatic milling experiment is designed, efficiently evaluating the performances of 1092 combinations of CGS parameters in 13 T700-12K/epoxy CFRP specimens. Microscopical observations and morphological analyses reveals four predominant fracture mechanisms in CFRP machining, with fiber-matrix debonding and bending-induced fracture identified as the key contributors to macroscopic cavity formation. A designated "Damage Zone" within the CGS, encompassing a cutting angle range of 90 degrees-270 degrees degrees -270 degrees and a fiber tilt angle of 15 degrees-60 degrees, degrees -60 degrees , is identified as a high-risk area for machining-induced surface cavities. Additionally, the impact of feeding orientation on the surface integrity is confirmed and explained by the influence on the equivalent FCA. Furthermore, the study elucidates chatter marks as a phenomenon induced by a confluence of factors, including generalized down milling, high FCA, and a significant effective cutting fiber count. The observed shift in chatter mark with varying feeding angles provides deep insights into the complex dynamics of machining parameters.

Influence of spatial engagement angles on machining forces and surface roughness in turning of unidirectional CFRP

A Unified Geometrical Modeling and Analysis Method for Evaluating CFRP Machining Performance: Cutting Geometry Space

Optimizing 5-Axis Tool Positioning and Orientation for Machining CFRP Curved Surfaces: Considering Fibers’ Orientation

Modeling and Analysis of Force Prediction in Milling Process of Unidirectional Fiber Reinforced Polymer Composites

Factor Analysis of Machining Parameters of Fiber-Reinforced Polymer Composites Based on Finite Element Simulation with Experimental Investigation

An analytical approach to cutting force prediction in milling of carbon fiber reinforced polymer laminates

Force coefficient characterization in machining of UD-CFRP using numerical-analytical approach

Partition Five-Axis Surface Machining of CFRP Laminate Structures Considering Fiber Orientation

Investigation on the Effects of Microstructure on Machining Unidirectional Carbon Fiber Reinforced Polymer Composites with a Modified Force Model

Machinability Characteristics Evolution of CFRP in a Continuum of Fiber Orientation Angles

STUDY ON MACHINING FORCES AND MACHINED SURFACE QUALITY OF PLANE WOVEN-FABRIC CFRP IN ORTHOGONAL CUTTING EXPERIMENT

Experimental Investigation on the Machinability of CFRP/Invar36 Hybrid Co-Cured Material in Turning Operations

Experimental investigation on the cutting mechanism and surface generation in orthogonal cutting of UD-CFRP laminates

Investigation of CFRP cutting mechanism variation and the induced effects on cutting response and damage distribution

Experimental Study on Orthogonal Cutting of 0° T700/LT03A CFRP Uniform Laminates

Influence of Fiber Orientation on Machined Surface Quality in Milling of Unidirectional CFRP Laminates

Analysis of subsurface damage during milling of CFRP due to spatial fibre cutting angle, tool geometry and cutting parameters

Machining inclination selection method for surface milling of CFRP workpieces with low cutting-induced damage

Theoretical model of instantaneous milling force for CFRP milling with a ball-end milling cutter: Considering spatial dimension and temporal dimension discontinuity effects

Study on the formation mechanism of cutting surface of carbon fiber-reinforced composites

Surface Morphology Characterization of Unidirectional Carbon Fibre Reinforced Plastic Machined by Peripheral Milling