Abstract:The fracture mechanisms of the carbon fibers seriously depend on fiber orientations which significantly influence the surface quality of carbon fiber reinforced plastics (CFRPs). Rotary ultrasonic drilling (RUD), possessing some excellent characteristics including the superior sidewall quality and high cylindricity error, offers a possibility for the efficient drilling of the CFRP components. In contrast, the effects of fiber orientations on fiber fracture mechanisms are still not fully recognized in RUD of CFRP composites. Incorporated with kinematic characteristics of the abrasive, a novel theoretical model was developed to quantitatively describe the effective orientation of the fiber. Afterwards, the drilling experiments with and without ultrasonic were conducted under the same parameters. The surface topographies of the hole sidewalls at various orientations were comparatively characterized to explore the fiber fracture mechanisms. Subsequently, the influences of these mechanisms and the drilling parameters the surface qualities were also investigated. Moreover, the bending failure mechanisms of the carbon fibers were explored through theoretical analysis. As a result, another fiber fracture mechanism, bending failure, was identified with the smooth fracture and micro-fragmentation topographies at upwind and leeward parts of the fiber cross-section, respectively. Ultrasonic superimposition by means of the immense inertia force of the abrasive promoted the micro-fracture of the carbon fiber. The weaker sustainment from the back-up materials brought about the serious bending failure of fiber oriented at 135°, while the axial load component aggravated the tensile fracture of the carbon fiber with the effective orientation of 45°. The critical moment of the fiber bending failure was also established, by incorporating the beam theory and linear elastic fracture mechanics. The fundamental investigation provided a favorable foundation for further optimizing the parameters to improve the drilling quality and efficiency in formal RUD of CFRP composites.

Experimental investigation on the cutting mechanism and surface generation in orthogonal cutting of UD-CFRP laminates

A Unified Geometrical Modeling and Analysis Method for Evaluating CFRP Machining Performance: Cutting Geometry Space

Study on the formation mechanism of cutting surface of carbon fiber-reinforced composites

Optimizing 5-Axis Tool Positioning and Orientation for Machining CFRP Curved Surfaces: Considering Fibers’ Orientation

Partition Five-Axis Surface Machining of CFRP Laminate Structures Considering Fiber Orientation

Factor Analysis of Machining Parameters of Fiber-Reinforced Polymer Composites Based on Finite Element Simulation with Experimental Investigation

An analytical approach to cutting force prediction in milling of carbon fiber reinforced polymer laminates

Investigation of CFRP cutting mechanism variation and the induced effects on cutting response and damage distribution

Investigation on the Effects of Microstructure on Machining Unidirectional Carbon Fiber Reinforced Polymer Composites with a Modified Force Model

Tailoring fiber arrangement in subsurface damage layer of unidirectional CFRP composites by reverse multi-pass cutting

Investigation on the Surface Formation Mechanism in Scratching of CFRP Composites with Different Fiber Orientations

Effects of fiber orientations on fracture mechanisms in rotary ultrasonic drilling of carbon fiber reinforced plastic laminates

Research on CFRP cutting mechanism by the micro-textured tool using macroscopic and microscopic numerical simulations

Numerical and experimental investigation of orthogonal cutting of carbon fiber-reinforced polyetheretherketone (CF/PEEK)

Investigation of high temperature effect on CFRP cutting mechanism based on a temperature controlled orthogonal cutting experiment

Investigating the material removal mechanism and cutting performance in ultrasonic vibration-assisted milling of carbon fibre reinforced thermoplastic

Interaction of Multiple Micro-Defects on the Strength and Failure Mechanism of UD Composites by Computational Micromechanics

Force coefficient characterization in machining of UD-CFRP using numerical-analytical approach

Machining inclination selection method for surface milling of CFRP workpieces with low cutting-induced damage

Investigation on heat transfer and ablation mechanism of CFRP by different laser scanning directions

Quality prediction and process optimization in abrasive waterjet cutting of ultra‐thick carbon fiber reinforced polymer