Abstract:In this study, the dynamic compressive response behavior of a body-centered cubic (BCC) single-phase TiZrNbV refractory high-entropy alloy (RHEA) was investigated under impact at speeds of 313-1584 m s -1 using two-stage, gas-gun-driven, high-speed plate-impact experiments; recovery sample analysis; and theoretical calculations. The strain rate and pressure were approximately 10 7 s -1 and 5.07-29.37 GPa, respectively. The results showed that the TiZrNbV RHEA had a Hugoniot elastic limit of 4.12-5.86 GPa and a spall strength of 1.84-2.03 GPa. The initial yield strength of the alloy showed a strong strain -rate dependence and could be described by the modified Zerilli-Armstrong model, while the phonon -damping effect was the main reason for its high strain-rate sensitivity. Microstructural analysis showed that the dynamic deformation of the TiZrNbV RHEA was controlled by the dislocation slip, dislocation proliferation, intersection of the deformation bands, and grain refinement. The analysis also showed that the intergranular, transgranular, and mixed-type cracks dominated the spall failure of the material. The dynamic Hall-Petch effect and pinning from the lattice distortion led to high dynamic yield strength. The critical strain rate for the phonon drag effect was positively related to the relative atomic mass and local strain field of the metals. Within the experimental loading range, the RHEA showed good structural stability, and simultaneously, the theoretical calculation method for the equation of state based on a cold -energy mixture could accurately predict its shock-response behavior. The valence-electron concentration (VEC) had a direct effect on the shock-compression properties of the HEAs; higher VEC implied more difficulty in compressing the HEAs. The findings of this study provide insights into understanding the mechanical response characteristics of RHEAs under extreme conditions such as high-speed impact and ultrahigh strain-rate loading. (c) 2023 Published by Elsevier Ltd on behalf of The editorial office of Journal of Materials Science & Technology.

Deformation mechanism of dislocation slip and kinking behaviour in dynamic compression response of TiZrHfNb alloy fabricated by laser directed energy deposition

In-Situ Tensile Deformation Behavior Of As-Built Laser Direct Metal Deposited Ti-6al-4v Alloy At 200 Degrees C

Dynamic Deformation Behaviors and Structure Evolution of TiZrHf Hexagonal Closed-Packed Medium-Entropy Alloy

Microstructural and texture evolution investigation of laser melting deposited TA15 alloy at 500?C using in-situ EBSD tensile test

The microstructural evolution and mechanical response of laser direct energy deposition Inconel 718 alloy based on simulation and experimental methods

Dynamic Compression Behavior of TiZrNbV Refractory High-Entropy Alloys Upon Ultrahigh Strain Rate Loading

Cellular structure mediated dislocation regulation in additively manufactured refractory high entropy alloy

Anisotropic dynamic compression response of an ultra-high strength steel fabricated by laser hybrid additive manufacturing

Grain refinement induced dynamic plasticity improvement in lightweight high entropy alloys

Microstructure and mechanical properties of a newly developed Ti-6Al-2Mo-2Sn-2Zr-2Cr-2V alloy fabricated by laser directed energy deposition

Investigating the microstructural evolution during deformation of laser additive manufactured Ti–6Al–4V at 400 °C using in-situ EBSD

The Influence of Columnar to Equiaxed Transition on Deformation Behavior of FeCoCrNiMn High Entropy Alloy Fabricated by Laser-Based Directed Energy Deposition

Investigation of α phase evolution and tensile fracture behavior of Ti5Al2Sn2Zr4Mo4Cr alloy fabricated by directed energy deposition

Probing deformation behavior of a refractory high-entropy alloy using in situ neutron diffraction

Strain-Rate-Dependent Deformation Behavior of Ti29Zr24Nb23Hf24 High Entropy Alloys at Elevated and Room Temperature

Dynamic Response of Ti-6Al-2Zr-1Mo-1V Alloy Manufactured by Laser Powder-Bed Fusion

The columnar dendrite and equiaxed dendrite transformation of high Nb-TiAl alloy by laser-directed energy deposition

Abnormal Aging Behaviors Induced by High-Density Dislocations for an Ultra-High-strength Titanium Alloy Prepared by Laser-Directed Energy Deposition

Dislocation patterning in the TiZrVTa refractory high-entropy alloy under tribological loading

Directed energy deposition additive manufacturing of a Sc/Zr-modified Al–Mg alloy: Effect of thermal history on microstructural evolution and mechanical properties

Microstructural evolution and tensile property enhancement of remanufactured Ti6Al4V using hybrid manufacturing of laser directed energy deposition with laser shock peening