Abstract:Evaluations of the risk of fault-induced water inrush hazard is an important issue for mining engineering applications. According to the characteristics of the seam floor during mining advancing, a mechanical model of fault activation is built to obtain the equations of normal stress and shear stress on the surface of fault, as well as the mechanics criterion of fault activation. Furthermore, using FLAC3D numerical software, the stress variation on the surface of fault under two different mining advancing directions are numerically simulated, and the distribution characteristics of the plastic failure zone of the roof and floor near the fault are obtained. The results show that: (1) When mining advances from the hanging wall, the normal stress increases more greatly than that from the foot wall, the shear stress distribution changes drastically with a large peak, and it is more likely to cause fault activation. (2) When mining advances from the hanging wall and approaches the fault, the normal stress and shear stress within the fault first increases, and then decreases suddenly. When mining advances from the foot wall, the normal stress and shear stress increases constantly, and the fault zone stays in the compaction state where the hanging wall and foot wall are squeezed together, which is unfavorable for water inrush hazard. (3) When mining advances from the hanging wall, the deep-seated fault under the floor is damaged first, and the plastic failure zone of the floor increases obviously. When mining advances from the foot wall, the shallow fault under the floor is damaged first, and the plastic failure zone of roof increases obviously. (4) For a water-conducting fault, the waterproof coal pillar size of the mining advancing from the hanging wall should be larger than that from the foot wall. (5) The in-situ monitoring results are in agreement with the simulation results, which proves the effectiveness of the simulation.

Excavation-Induced Fault Instability: A Machine Learning Perspective

Instability Mechanism of Shallow Tunnel in Soft Rock Subjected to Surcharge Loads

Unloading-induced Instability of a Simulated Granular Fault and Implications for Excavation-Induced Seismicity

Predictive Modeling of Short-Term Rockburst for the Stability of Subsurface Structures Using Machine Learning Approaches: t-SNE, K-Means Clustering and XGBoost

Numerical Simulation of Mining-Induced Stress Evolution and Fault Slip Behavior in Deep Mining

SS-XGBoost: A Machine Learning Framework for Predicting Newmark Sliding Displacements of Slopes

Instability of an intersecting fault-dyke system during deep rock excavation

Safety Evaluation of Anchoring-Grouting Rock-Support Interaction in Deep Underground Excavation Based on Support Vector Machine Learning

Innovative computational model for optimal deep coal mining under large-scale crustal stress conditions

Long-term prediction modeling of shallow rockburst with small dataset based on machine learning

Excavation Stress Path Induced Fracturing Mechanism of Hard Rock in Deep Tunnel

Analysis of Factors Influencing Mining Damage Based on Engineering Detection and Machine Learning

Pre-earthquake anomaly extraction from borehole strain data based on machine learning

Study on Overburden Rock Movement and Stress Distribution Characteristics under the Influence of a Normal Fault

Predictive Modeling of Mining Induced Ground Subsidence with Survival Analysis and Online Sequential Extreme Learning Machine

A review of unloading-induced fault instability

Newmark sliding displacements of slopes

Driving Force of Rockburst in Deep Tunnels with Geological Structures Based on Nonequilibrium Evolution

Numerical Modeling and Investigation of Fault-Induced Water Inrush Hazard under Different Mining Advancing Directions

Deformation and Stability Analysis of Surrounding Rock Mass in Deep Underground Cavern Based on Microseismic monitoring and Numerical Modelling

Failure Mechanism Analysis of Mining-Induced Landslide Based on Geophysical Investigation and Numerical Modelling Using Distinct Element Method