Abstract:This study focused on the large deformation issue of surrounding rock mass affected by a large discontinuity in an underground powerhouse under high in situ stress. A comprehensive investigation was conducted integrating field survey, site monitoring, laboratory test and numerical simulation to reveal the deformation and failure mechanism. The deformation and failure of the surrounding rock mass is a key issue during the construction of large‐scale underground powerhouse, and large discontinuities are likely to cause this problem in the presence of complex geological structures. This article takes the right bank underground powerhouse of the Baihetan Hydropower Station as a case study. In this case, deformation mutation of the surrounding rock mass occurred in the south section of the main powerhouse, with the maximum deformation reaching 178 mm, and the deformation and failure of different parts showed differences. A comprehensive study integrating field survey, site monitoring, laboratory test and numerical simulation was carried out. By field survey and monitoring, characteristics of deformation and failure are described, and the spatiotemporal difference in deformation is analysed. The stress evolution during excavation is studied based on numerical simulations, the mechanical response of rock is derived through laboratory tests, and the mechanism of spatiotemporal difference is revealed. The results indicate that the main reason for the spatiotemporal difference is the presence of slightly inclining interlayer shear zone C4. In the south section, the excavation‐induced stress concentration at the arch was enhanced due to C4, with the maximum principal stress exceeding 70 MPa, and the high compressive stress here triggered the deformation mutation of surrounding rock mass. After undergoing a stress path from concentration to unloading, the surrounding rock mass at the downstream sidewall was seriously damaged, and its deformation also mutated under approximately vertical stress. The mutation resulted in the uneven spatial distribution, large increment and time‐dependent feature of deformation.

Instability of an intersecting fault-dyke system during deep rock excavation

Instability Mechanism of Shallow Tunnel in Soft Rock Subjected to Surcharge Loads

Deformation and Stability Analysis of Surrounding Rock Mass in Deep Underground Cavern Based on Microseismic monitoring and Numerical Modelling

Stability analysis of surrounding rock mass in underground powerhouse considering damage effect of microfractures

Rock fracturing observation based on microseismic monitoring and borehole imaging: In situ investigation in a large underground cavern under high geostress

Development of Discontinuous Deformation Analysis with Displacement-Dependent Interface Shear Strength

3D NUMERICAL MODELING OF POSSIBLE FAILURE ZONE WITH UNDERGROUND EXCAVATION

Deformation and failure analysis of surrounding rock mass in deep buried tunnels subjected to excavation

Role of hydro-mechanical coupling in excavation-induced damage propagation, fracture deformation and microseismicity evolution in naturally fractured rocks

Spatiotemporal difference of deformation and failure affected by a large discontinuity in the surrounding rock mass: A case study at the Baihetan underground powerhouse

Mechanism and experimental investigation of sudden water inrush hazards in surrounding rock due to shear fracture in deep mining operations

A path for evaluating the mechanical response of rock masses based on deep mining-induced microseismic data: A case study

Microseismic Monitoring of Rock Mass Fracture Response to Blasting Excavation of Large Underground Caverns Under High Geostress

Visualization and early warning analysis of damage degree of surrounding rock mass in underground powerhouse

A multiscale analysis of adjacent fault dislocation mechanism induced by tunnel excavation based on continuous-discrete coupling method

Stress wave propagation and incompatible deformation mechanisms in rock discontinuity interfaces in deep-buried tunnels

Excavation-Induced Fault Instability: A Machine Learning Perspective

Dynamic stress characterization and instability risk identification using multisource acoustic signals in cut-and-fill stopes

Stability Analysis of Surrounding Rock in Deep Underground Engineering Under Fluid-solid Interaction

Understanding the failure mechanism of a large underground cavern in steeply dipping layered rock mass using an enhanced ubiquitous-joint model

Effects of natural stiff discontinuities on the deformation and failure mechanisms of deep hard rock under true triaxial conditions