Abstract:Rare earth (RE) elements have large solid solubility in magnesium and are widely used to regulate the microstructure and property of advanced magnesium alloys. However, different kinds of RE elements have different effects on microstructure and property of the alloy. In this study, a Mg–Zn–Y alloy and a Mg–Zn–Gd alloy with alloying elements of the same atomic percentage were designed to clarify the effect of yttrium (Y) and gadolinium (Gd) on the corrosion behavior of as-cast MgZn 2 Y 2.66 and MgZn 2 Gd 2.66 alloys. The results show that the MgZn 2 Y 2.66 alloy is mainly composed of α-Mg phase and long period stacking ordered (LPSO) phase, while MgZn 2 Gd 2.66 alloy is mainly composed of α-Mg phase and (Mg, Gd) 3 Zn phase (W phase). Generally speaking, the corrosion phenomena of the two alloys in 3.5 wt% NaCl solution are similar. In the early stages of exposure, the alloys underwent uniform corrosion at a relatively low corrosion rate. With prolonged exposure, localized corrosion became dominated and the corrosion rate was greatly increased. However, the corrosion rate of the MgZn 2 Y 2.66 alloy, in terms of the corrosion current density, is about one order of magnitude lower than that of the MgZn 2 Gd 2.66 alloy. The high corrosion resistance of the MgZn 2 Y 2.66 alloy is mainly attributed to the presence of LPSO phase in form of continuous networks and the relatively high corrosion resistance of the corrosion product layer on the alloy.

Effect of minor Gd addition on microstructure, mechanical performance, and corrosion behavior of Mg–Y–Gd alloys

Effects of solid solution and aging process on microstructure and mechanical properties of Mg-Gd-Y alloy

Roles of micro-alloyed Y and Gd in improving the corrosion resistance and mechanical properties of pure Mg

Improving the corrosion resistance of MgZn1.2Gd Zr0.18 (x = 0, 0.8, 1.4, 2.0) alloys via Gd additions

Effect of minor Ca addition on microstructure and corrosion behavior of Mg–Y–Ca alloys

Microstructures and Properties of Mg–7Gd Alloy Containing Y

Microstructure of as-cast Mg-4.2Zn-0.8Y (at.%) alloys containing Gd

Improving tensile properties and corrosion resistance of Mg–Zn–Ca–Mn alloy via Gd addition

Microstructure and Mechanical Properties of Mg–9Li–3Al–xGd Alloys

Effect of Ti Addition on the Microstructure and Mechanical Properties of Cast Mg-Gd-Y-Zn Alloys

Influences of Gd on the Microstructure and Strength of Mg–4.5Zn Alloy

Effect of Substituting Y with Gd on LPSO Phase Dispersion and Mechanical Properties of Mg-2Ni-2Y Alloy

Effect of Gd content on microstructure and dynamic mechanical properties of solution-treated Mg−xGd−3Y−0.5Zr alloy

Comparative Study on Corrosion Behavior and Mechanism of As-Cast Mg–Zn–Y and Mg–Zn–Gd Alloys

Microstructure and mechanical properties of cast Mg-6Gd–Zr alloy with different Y addition

Enhanced Mechanical Properties and Corrosion Resistance by Minor Gd Alloying with a Hot-Extruded Mg Alloy

Role of Y on the microstructure and mechanical properties of Mg-Gd-Zr alloy

Effect of Gd on microstructure and stress corrosion cracking of the AZ91‐extruded magnesium alloy

Effects of Gd on Microstructure and Mechanical Properties of AZ61 Magnesium Alloy

Effects of Y, Gd on Microstructure and Mechanical Properties of AZ61 Magnesium Alloy

Effects of Mn, Zr on microstructure and properties of Mg-Gd-Y alloys