Abstract:DEMO-FNS (DEMO Fusion Neutron Source) will be a hybrid reactor designed to combine fusion and fission technologies. In a hybrid reactor the power is mainly produced by a fission blanket which is exposed to the neutron flux generated by confined fusion plasma used as a Fusion Neutron Source (FNS). The steady-state operation of the FNS is easier to achieve as compared to pure fusion reactors, allowing the FNS to be more compact. The DEMO-FNS will produce 40 MW of fusion power. The neutral beam injectors (NBI) are designed to provide a steady state plasma heating, rotation, fueling, current drive and neutron generation in DEMO-FNS. Four injector units will deliver 30 MW power in deuterium with energy E b = 500 keV. The NBI concept and main components are inspired from ITER HNBI design implementing acceleration of negative ions with their neutralization on gas. The high density of injected power in DEMO-FNS leads to a very specific operation scenario with a higher ratio of high-energy ions in the plasma with respect to conventional tokamaks, where the main part of neutron flux will result from fusion between hot-tail ions and relatively cold background. The current drive and neutron yield produced by the tangentially injected beam in a steady-state operation are strongly affected by magnetic configuration and plasma kinetic profiles. The fast ions deposition and performance in plasma are limited by the losses associated with the neutral beam shape and aiming. The main channels of direct beam losses include shine-through losses, as well as fast ion orbital losses. The detailed evaluation of NB parameters and geometry effects is a necessary step of scenario optimization. BTR code (Beam Transmission or, in earlier versions, Beam Transmission with Reionization) is intended for injector beamlines study, and BTR detailed beam model can be also applied to perform a detailed analysis of beam losses and performance in plasma. The analysis of beam in plasma shows the ways towards higher values of beam driven current (NBCD) and neutral yield; the beam-in-plasma behaviour can be tuned for a given tokamak configuration. The NB tracing model workflow is implemented in the BTOR suite (Beam in TORoids). The results for DEMO-FNS are compared with the NBI performance in ITER tokamak, as both machines are beam-driven and implement a similar NBI concept.

Development of Neutronic Model of Hybrid DEMO-FNS Reactor by Means of NESTOR Code and Monte Carlo Method

The impact of neutral beam parameters on current drive and neutron yield in DEMO-FNS tokamak

Neutronic analysis of european sodium-cooled fast reactor using Monte Carlo

Thermal-to-fusion Neutron Convertor and Monte Carlo Coupled Simulation of Deuteron/triton Transport and Secondary Products Generation

Neutronics Analysis on High-Temperature Gas-Cooled Pebble Bed Reactors by Coupling Monte Carlo Method and Discrete Element Method

Study On Neutronics And Fuel Cycle Of Fusion-Fission Hybrid Reactor

Comparison analysis of 1D/2D/3D neutronics modeling for a fusion reactor

A novel discontinuous-Galerkin deterministic neutronics model for Fusion applications: development and benchmarking

Modeling of heating scheme impacts on neon seeded plasmas with the resonant magnetic perturbation application in the large helical device: ECR and NBI heating

Neutronic Analysis of the Fusion Reactor ARC: Monte Carlo Simulations with the Serpent Code

NEUTRONIC MODELING STRATEGIES FOR A LIQUID FUEL TRANSIENT CALCULATION

A Monte-Carlo model of neutral-particle transport in diverted plasmas

Neutronic analysis of IFMIF-DONES test cell cooling system

The neutronic calculations for some fluids, libraries and structural materials in a hybrid reactor system

Neutron Generation Based Method for Monte Carlo Three-Dimensional Reactor Time-Dependent Simulation

Neutronics and Thermo-Fluids Simulation of Generic Pebble-Bed Fluoride-Salt-Cooled High-Temperature Reactor

Development of DEMO-FNS tokamak for fusion and hybrid technologies

Monte Carlo Simulation of the UK’s First EPR Nuclear Reactor Startup Core Using Serpent

An Algorithm for Accurate Modeling and Simulating Reactor Cores with Involute‐shaped Fuel Plates by Monte Carlo

Study on the Influencing Factors of Temperature Field Based on PWR Water-Cooled Blanket for DEMO Reactor

Validation of NSFsim as a Grad-Shafranov Equilibrium Solver at DIII-D