Abstract:Hard carbon materials are considered to be the most practical anode materials for sodium ion batteries because of the rich availability of their resources and potentially low cost. Here, the conversion of corn leaf biomass, a largely available agricultural waste, into carbonaceous materials for Na-ion storage application is reported. Thermal analysis investigation determines the presence of exothermic events occurring during the thermal treatment of the biomass. Accordingly, various temperatures of 400, 500, and 600 °C are selected to perform carbonization treatment trials, leading to the formation of various biocarbons. The materials obtained are characterized by a combination of methods, including X-ray diffraction, electron microscopy, surface evaluation, Raman spectroscopy, and electrochemical characterizations. The Na-ion storage performances of these materials are investigated using water-soluble carboxymethyl cellulose binder, highlighting the influence of the carbonization temperature on the electrochemical performance of biocarbons. Moreover, the influence of post-mechanochemical treatment on the Na-ion storage performance of biocarbons is studied through kinetic evaluations. It is confirmed that reducing the particle sizes and increasing the carbon purity of biocarbons and the formation of gel polymeric networks would improve the Na-ion storage capacity, as well as the pseudocapacitive contribution to the total current. At a high-current density of 500 mA g-1, a specific Na-ion storage capacity of 134 mAh g-1 is recorded on the biocarbon prepared at 600 °C, followed by ball-milling and washing treatment, exhibiting a reduced charge transfer resistance of 49 Ω and an improved Na-ion diffusion coefficient of 4.8 × 10-19 cm2 s-1. This article proposes a simple and effective technique for the preparation of low-cost biocarbons to be used as the anode of Na-ion batteries.

Corn stalks derived hierarchical porous carbon as ultra-efficient anode materials for sodium-ion batteries

Lignin-Derived Nitrogen-Doped Porous Carbon as a High-Rate Anode Material for Sodium Ion Batteries

Electrode Materials: A Hierarchical N/S-Codoped Carbon Anode Fabricated Facilely from Cellulose/Polyaniline Microspheres for High-Performance Sodium-Ion Batteries (Adv. Energy Mater. 6/2016)

Biomass‐Derived Phosphorus‐Doped Porous Hard Carbon Anode for Stable and High‐Rate Sodium Ion Batteries

A Hierarchical N/S‐Codoped Carbon Anode Fabricated Facilely from Cellulose/Polyaniline Microspheres for High‐Performance Sodium‐Ion Batteries

Honeycomb-inspired Design of Ultrafine SnO2@C Nanospheres Embedded in Carbon Film As Anode Materials for High Performance Lithium- and Sodium-Ion Battery

Hierarchical porous hard carbon derived from rice husks for high-performance sodium ion storage

Hierarchical Porous Carbon Anode Materials Derived from Rice Husks with High Capacity and Long Cycling Stability for Sodium‐Ion Batteries

One-step production of capacitive-dominated carbon anode derived from biomass for sodium-ion batteries

Hard Carbon Derived from Straw as Anode Materials for Sodium-ion Batteries

Sustainable Fabrication of a Practical Hard Carbon Anode for a Sodium-Ion Battery with Unprecedented Long Cycle Life

A porous biomass-derived anode for high-performance sodium-ion batteries

An Amorphous/Crystalline Incorporated Si/SiOx Anode Material Derived from Biomass Corn Leaves for Lithium-Ion Batteries.

Sustainable and scalable fabrication of high-performance hard carbon anode for Na-ion battery

Electrochemical Behavior of the Biomass Hard Carbon Derived from Waste Corncob as a Sodium-Ion Battery Anode

In Situ Growth of CoO Nanosheets on Carbon Fiber Derived from the Corn Cellulose as Advanced Hybrid Anode for Lithium-ion Batteries

A Stable Biomass‐Derived Hard Carbon Anode for High‐Performance Sodium‐Ion Full Battery

Nitrogen doped porous carbon as excellent dual anodes for Li- and Na-ion batteries

Nickel-templated carbon foam anodes for sodium-ion batteries

N, S self‐doped porous carbon with enlarged interlayer distance as anode for high performance sodium ion batteries

Carbonization of Corn Leaf Waste for Na-Ion Storage Application Using Water-Soluble Carboxymethyl Cellulose Binder