Abstract:The objective of the EU project “Sensors Towards Advanced Monitoring and Control of Gas Turbine Engines (acronym STARGATE)” is the development of a suite of advanced sensors, instrumentation and related systems in order to contribute to the developing of the next generation of green and efficient gas turbine engines. One work package of the project deals with the design and development of a long wavelength infrared (LWIR) radiation thermometer for the non-contact measurement of the surface temperature of thermal barrier coatings (TBCs) during the operation of gas turbine engines.For opaque surfaces (e.g. metals or superalloys) radiation thermometers which are sensitive in the near or short wavelength infrared are used as state-of-the-art method for non-contact temperature measurements. But this is not suitable for oxide ceramic based TBCs (e.g. partially yttria stabilized zirconia) as oxide ceramics are semi-transparent in the near and short wavelength infrared spectral region. Fortunately the applied ceramic materials are non-transparent in the long wavelength infrared and additionally exhibit a high emittance in this wavelength region.Therefore, a LWIR pyrometer can be used for non-contact temperature measurements of the surfaces of TBCs as such pyrometers overcome the described limitation of existing techniques. For performing non-contact temperature measurements in gas turbines one has to know the infrared-optical properties of the applied TBCs as well as of the hot combustion gas in order to properly analyse the measurement data. For reaching a low uncertainty on the one hand the emittance of the TBC should be high (>0.9) in order to reduce reflections from the hot surrounding and on the other hand the absorbance of the hot combustion gas should be low (<0.1) in order to decrease the influence of the gas on the measured signal.This paper presents the results of the work performed by the authors with focus on the implementation of the LWIR pyrometer and the selection of the optimal wavelength band where the detector should be sensitive. Besides determining the spectral infrared-optical properties (emittance, transmittance and absorbance) of the TBCs and the hot combustion gas at high temperatures up to 1700K, the wavelength specification of the developed LWIR pyrometer is defined. Also an overview of the LWIR radiation thermometer is given and the preliminary results for different temperatures and environmental conditions are presented. Finally the measurement uncertainty of the LWIR-pyrometer is deduced.

Panoramic Scanning Optical Pyrometer for the Temperature Field Measurement of Turbine Components

A TEMPERATURE-GRADIENT CORRECTION METHOD FOR FILM COOLING EFFECTIVENESS MEASUREMENT USING ENDOSCOPE-BASED PSP TECHNIQUE

An Experimental Study of Turbine Vane Film Cooling Using Endoscope-Based PSP Technique in a Single-Passage Wind Tunnel

Three-dimensional temperature reconstruction strategy for turbine blades using infrared thermography at simulated-engine conditions

Fiber Optic Array Temperature Field Measurement System for High-Temperature Turbine Blades

Novel Focal Sweep Strategy for Optical Aerothermal Measurements of Film-Cooled Gas Turbine Blades with Highly Inclined Viewing Angle

Temperature field measurement of turbine rotor blade leading edge based on infrared radiation pyrometer

Effective Spectral Emissivity of Gas Turbine Blades for Optical Pyrometry

Multispectral Radiometric Temperature Measurement Algorithm for Turbine Blades Based on Moving Narrow-Band Spectral Windows.

VIS-NIR Multispectral Synchronous Imaging Pyrometer for High-Temperature Measurements.

Subpixel Temperature Measurements in Plasma Jet Environments Using High-Speed Multispectral Pyrometry

A Wide-Range Multi-Spectral Pyrometer For True Temperature Measurement Of Solid Rocket Engine Plume

Turbine Blade Three-Wavelength Radiation Temperature Measurement Method Based on Reflection Error Correction

A Review Of Aero-Engine Turbine Blade Temperature Measurement

Development of A Multi-Spectral Pyrometry Sensor for High-Speed Transient Surface-Temperature Measurements in Combustion-Relevant Harsh Environments

Online reconstruction of 3D temperature field fused with POD-based reduced order approach and sparse sensor data

A Compact LWIR Borescope Sensor for 2D Engine Component Surface Temperature Measurement

Long wavelength infrared radiation thermometry for non-contact temperature measurements in gas turbines

Multidimensional high-temperature field measurement method for flame based on near infrared radiation spectrum of water vapor

Development of a Special Multi-Wavelength Pyrometer for Temperature Distribution Measurements in Rocket Engines

Advances in the application of non-contact temperature measurement technology for aero-engine blade.