Abstract:A miniature fiber-optic tip Fabry-Perot (FP) pressure sensor with excellent high-temperature survivability, assembled by hydroxide catalysis bonding (HCB) technology, is proposed and experimentally demonstrated. A standard single-mode fiber is fusion spliced to a fused silica hollow tube with an outer diameter (OD) of 125 µm, and a 1-µm-thick circular silicon diaphragm with a diameter slightly larger than the OD is bonded to the other endface of the hollow tube by HCB technology. The ultrathin silicon diaphragm is prepared on a silicon-on-insulator (SOI) wafer produced by microelectromechanical systems (MEMS), providing the capability of large-scale mass production. The HCB technology enables a polymer-free bonding between diaphragm and hollow tube on fiber tip with the obvious advantages of high alignment precision, normal pressure and temperature (NPT) operation, and reliable effectiveness. The static pressure and temperature response of the proposed sensor are discussed. Results show that the sensor has a measurable pressure range of 0∼100 kPa, which is well consistent with the measurement range of biological blood pressure. The pressure sensitivity is up to 2.13 nm/kPa with a resolution of 0.32% (0.32kPa). Besides, the sensor possesses a unique high-temperature resistant capability up to 600 °C, which can easily survive even in high-temperature sterilization processes, and it has a low temperature dependence of 0.09 kPa/°C due to the induced HCB bonding technology and the silicon-based diaphragm. Thus, the proposed fiber tip pressure sensor is desirable for invasive biomedical pressure diagnostics and pressure monitoring in related harsh environments.

Micro-bubble F-P cavity and FBG Cascade Structure-based Pressure Sensor with Temperature Self-compensation For Minimally Invasive Surgery

Single Optical Microfiber Enabled Tactile Sensor for Simultaneous Temperature and Pressure Measurement

Comparison of Measurements with Finite-Element Analysis of Silicon-Diaphragm-Based Fiber-Optic Fabry–Perot Temperature Sensors

An optical fiber Fabry–Pérot micro-pressure sensor based on beam-membrane structure

Pressure sensor catheter based on Fiber Tip Fabry-Pérot-Interferometer and Fiber Bragg Grating for temperature compensation

Opto-Microfluidic Fabry-Perot Sensor with Extended Air Cavity and Enhanced Pressure Sensitivity

Highly Sensitive Gas Pressure Sensing with Temperature Monitoring Using a Slightly Tapered Fiber with an Inner Micro-Cavity and a Micro-Channel

Highly Sensitive Optical Fiber Pressure SensorBased on FPI and Vernier Effect via FemtosecondLaser Plane-by-Plane Writing Technology

A Large-Range and High-Sensitivity Fiber-Optic Fabry–Perot Pressure Sensor Based on a Membrane-Hole-Base Structure

High temperature and high pressure fiber microsphere Fabry–Perot sensor based on Vernier effect and FBG

Mechanical Structure Design of Pressure Sensors with Temperature Self-compensation for Invasive Blood Pressure Monitoring

An Optical Fiber Fabry–Perot Pressure Sensor With Optimized Manufacturing Parameters

Compact highly sensitive Fabry-Perot temperature and gas pressure sensing probe fabricated by a femtosecond laser and PDMS

Miniaturized Piezo Force Sensor for a Medical Catheter and Implantable Device

Miniature Fiber Pressure Sensor Based on an In-Fiber Confocal Cavity

A MEMS-Based High-Fineness Fiber-Optic Fabry–Perot Pressure Sensor for High-Temperature Application

Polymer Microbubble-Based Fabry–Perot Fiber Interferometer and Sensing Applications

High-precision optical fiber pressure sensor using frequency-modulated continuous-wave laser interference

Eccentric reflective optical fiber MEMS micro-pressure sensor

High-Consistency Optical Fiber Fabry–Perot Pressure Sensor Based on Silicon MEMS Technology for High Temperature Environment

Miniature fiber-optic tip pressure sensor assembled by hydroxide catalysis bonding technology