Abstract:3D monolithic integration of logic and memory devices has emerged as one of the key enablers for next-generation electronic devices to address the ever-increasing demand for higher integration density, better performance and energy efficiency. BEOL-compatible oxide semiconductors show great potential to revolutionize the field thanks to their unique properties [1]. We present our recent advancement related to BEOL-compatible oxide semiconductors for logic and memory applications. The digital-etch-enabled nanowire transistors and α -IGZO-based eDRAM will first be discussed, followed by the ferroelectric (FE) memories with high performance and novel structures utilizing α -IGZO or ALD-deposited ZnO as the channel. Ultra-scaled amorphous IGZO ( α -IGZO) nanowire field-effect transistors (NW-FETs) hold great potential for applications demanding high performance and integration density. To realize the fabrication of high-quality and aggressively-scaled nanowire structures, a novel digital etching method for amorphous α -IGZO materials has been proposed and demonstrated [2]. Confirmed by the SEM images of an α -IGZO nanowire before and after digital etching, a notable nanowire width W NW reduction can be observed. We have the thinnest α -IGZO nanowire achieved by the digital etching with a W NW of approximately 20 nm. By further developing the transistor upon the nanowire, the α -IGZO NW-FET attains a good subthreshold swing (SS) of 80 mV/decade and a high peak extrinsic transconductance ( G m, ext ) of 612 μS/μm at V DS of 2 V (456 μS/μm at V DS = 1 V). Compared to the previous studies, our IGZO NW-FET achieves one of the highest peak G m values among all IGZO-based FETs. Besides the BEOL compatibility and high on-current, ultra-low subthreshold leakage makes α -IGZO FETs extremely promising for eDRAM. We further investigated the potential of α -IGZO eDRAM by developing the charge-domain compute-in-memory (CiM) [3]. Experiments have demonstrated small SS, large on-state current, and long-time charge retention with our dedicated 4T1C memory cell. With differential cell structure, an even higher tolerance for charge loss can be attained. With experiment-calibrated benchmarking in the VGG-8 network for CIFAR-10 image classification tasks, 2092 TOPS/W power efficiency for the CiM core can be expected, outperforming the prior TFT and CMOS-based CiM approaches, exhibiting significant advantages for ultra-low-power applications. The integration of doped-HfO 2 FE material and oxide semiconductor, both BEOL-compatible with large-scale and cost-effective deposition, presents a promising avenue for advancing data storage in the future. We have developed the high-performance α -IGZO Fe-FET with a metal-ferroelectric-metal-oxide-semiconductor (MFMIS) structure as well as the Fe TCAM [4]. The α -IGZO Fe-FET achieves a large memory window of ~3 V with high reliability, while the Fe TCAM reduces the transistor number from 16 to 2 compared to the traditional SRAM-based one. Besides α -IGZO, we believe that ALD-based oxide semiconductors featuring high controllability of film thickness and conformal coverage of the 3D structures can create new opportunities for novel device structure and integration. The fin-gate ZnO Fe-FET stands for a great example while not only outstanding device performance but also suppressed device-to-device variation due to the unique structure have been demonstrated, holding tremendous promise for high-density 3D integration [5]. Acknowledgments: This work is supported by Singapore Ministry of Education (Tier 2: MOE2018-T2-2-154, Tier 1: R-263-000-D65-114). References : [1] S. Dutta et al. , IEDM, p. 36.4., 2020. [2] K. Han et al. , VLSI , 2021, p. T10-1. [3] J. Liu et al. , IEDM , 2021, p. 46.2. [4] C. Sun et al. , VLSI , 2021, p. T7-4. [5] Q. Kong et al. , IEDM , 2022, p. 12.3.

A New Back‐End‐Of‐Line Ferroelectric Field‐Effect Transistor Platform via Laser Processing

Low‐Temperature Nanosecond Laser Process of HZO‐IGZO FeFETs toward Monolithic 3D System on Chip Integration

Scalable CMOS back-end-of-line-compatible AlScN/two-dimensional channel ferroelectric field-effect transistors

Scalable CMOS-BEOL compatible AlScN/2D Channel FE-FETs

Crystal Filter-Mediated Grain Alignment in Poly-Si Thin-Film Transistors for Next-Generation Ferroelectric Memory Devices

Operation and Design of Ferroelectric FETs for a BEOL Compatible Device Implementation

Ferroelectric Field‐Effect‐Transistor Integrated with Ferroelectrics Heterostructure

A back-end, CMOS compatible ferroelectric Field Effect Transistor for synaptic weights

Laminated Ferroelectric FET With Large Memory Window and High Reliability

Ferroelectric field effect transistors: Progress and perspective

Logic Compatible High-Performance Ferroelectric Transistor Memory

High-performance ferroelectric field-effect transistors with ultra-thin indium tin oxide channels for flexible and transparent electronics

High-Performance Ferroelectric Field-Effect Transistors with Ultra-High Current and Carrier Densities

Multistate, Ultrathin, Back-End-of-Line-Compatible AlScN Ferroelectric Diodes

A 3D Vertical-Channel Ferroelectric/Anti-Ferroelectric FET With Indium Oxide

Post-CMOS Compatible Aluminum Scandium Nitride/2D Channel Ferroelectric Field-Effect-Transistor Memory.

Design Guidelines of Hafnia Ferroelectrics and Gate-Stack for Multilevel-Cell FeFET

Monolithic 3D integration of back-end compatible 2D material FET on Si FinFET

Silicon doped hafnium oxide (HSO) and hafnium zirconium oxide (HZO) based FeFET: A material relation to device physics

(Invited) BEOL-Compatible Oxide Semiconductor Logic and Memory Devices

ScAlN Based Ferroelectric Field Effect Transistors with ITO Channel