Abstract:Solid Oxide Fuel Cell (SOFC) is a developing energy conversion technology featuring high efficiency, power density, durability, and fuel compatibility. With these advantages, SOFCs are combined frequently with heat engines such as gas turbines, for higher system efficiency and power density. In practice, SOFCs are often required to deliver certain power. Considering economical aspects, power generation efficiency is critical to the running cost of energy conversion systems. However, high power and high efficiency are likely reached under different operating conditions. For example, to meet peak power demands, higher operating currents and fuel flowrates are necessary, while SOFCs are generally more energy efficient at lower current densities and fuel flowrates. Hence, the ideal operating condition is the solution to a power-constrained efficiency optimization problem. Moreover, SOFCs degrade as they operate, introducing gradual changes to SOFC characteristics. Thus, the optimization needs to be solved dynamically. To analyze the above-mentioned problem, a 10 cm by 10 cm planar SOFC was repeatedly tested for polarization characterizations and electrochemical impedance spectra. A 2-dimentional multi-physics model was developed and calibrated using both polarization and impedance data. To account for the lower open circuit voltage at lower fuel flowrates, an equivalent leakage current is included in the model. The model was thereafter employed for efficiency optimization given power constraints. At each required power output, the optimal fuel flowrate and the corresponding voltage, current, and efficiency was calculated. The electrical efficiency peaks globally at around 0.1 Standard Liter per Minute (SLM) hydrogen flowrate, while at higher power, the optimal efficiency is reached at fuel utilizations between 65% and 90%. Accounting for degradation in terms of growing ohmic resistance and decreasing electrode exchange current densities, the optimal efficiency is reached at lowering fuel utilization and lowering voltage, which may result in local oxidization of the anode. Moreover, an easy and straight-forward way was proposed to estimate the optimal fuel flowrate given polarization data. Further studies involving the safety constraints will be carried out in the future. Figure 1

Analysis and design for hydrogen-fueled cascade solid oxide fuel cell system

Numerical Simulation and Optimization of Operating and Structural Parameters for Solid Oxide Fuel Cell

Experimental Study on High-Efficiency Microtubular Solid Oxide Fuel Cell Stacks Using Various Fuels

Numerical Modeling and Current Collection Designs for Flat-Chip Solid Oxide Fuel Cell

Optimization of a 30 Kw SOFC Combined Heat and Power System with Different Cycles and Hydrocarbon Fuels

Numerical multi-physical optimization of operating condition and current collecting setup for large-area solid oxide fuel cells

A cascade energy cycle based on solid oxide fuel cell with electric energy storage option

Efficiency Optimization of SOFC Subject to Degradation and Minimum Power Constraint

Study of the Influences of Fuel Utilization on Efficiency and Anode Safety at Different Fuel Flow Rates for Industrial-Size Solid Oxide Fuel Cell

Design and Energy Efficiency Analysis of Hydrogen - Fueled SOFC-‘GT+ST’ Combined Cycle System

Conception and Thermo-Economic Performance Investigation of a Novel Solid Oxide Fuel Cell/ Gas Turbine/kalina Cycle Cascade System Using Ammonia-Water As Fuel

STUDY OF THE DESIGN METHOD FOR SOFC-CHP SYSTEM

Study of Operating Conditions for High Efficiency and Anode Safety of Industrial-Size Solid Oxide Fuel Cell

Evaluating the effectiveness of the modified multi-scale multi-physics coupled model for solid oxide fuel cells: A comparative analysis

Analysis of a 1 kW residential combined heating and power system based on solid oxide fuel cell

Systems optimization of SOFC-based BCHP system

SOFC-GT Hybrid System Simulation Using a Distributed-Parameter SOFC Model

Efficiency improvement strategy of fuel cell system based on oxygen excess ratio and cathode pressure two-dimensional optimization

A hybrid system integrating solid oxide fuel cell and thermo-radiative-photovoltaic cells for energy cascade utilization

Optimizing Solid Oxide Fuel Cell Performance to Re-evaluate Its Role in the Mobility Sector

Numerical Simulation of Solid Oxide Fuel Cells Comparing Different Electrochemical Kinetics