Abstract:Since water source treatment processes are generally done chemically (e.g., via surface adsorption), the ongoing synthesis of new and efficient adsorbent materials is necessary. Hence, in this study, a new and magnetic CuFe 12 O 19 /CuS nanoadsorbent was synthesized on a laboratory scale, using the extract of the Artemisia plant as a reducing agent, and its morphological features were specified using FESEM, FT-IR, XRD, TEM, BET, EDS, DLS, and VSM analyses. Then, its efficiency was assessed in the surface adsorption of a tetracycline pollutant, whereby the pH, contact time, initial pollutant concentration, nanocomposite dose, and temperature parameters were studied. The results indicate that the investigated adsorbent was correctly synthesized. It had many pores and an appropriate and specific surface on which to perform the adsorption process, and it also demonstrated superparamagnetic features. In addition, the results of removal processes showed that with increasing pH, the adsorption efficiency first increases from 21.02 to 80.02% and then decreases to 56.14%. Meanwhile, with increasing nanocomposite dose and temperature, the adsorption percentage rises to 94.08% and 96.84%, respectively, and with the increase in the initial concentration of the pollutant, the adsorption efficiency decreases to 45.19%. Thus, under optimal conditions (nanoadsorbent dose of 2 g/L, tetracycline concentration of 20 mg/L, and neutral pH over 200 min), a 100% efficiency in the tetracycline adsorption process can be obtained. The data obtained from nonlinear models of the Langmuir ( R 2 = 0.903), Freundlich ( R 2 = 0.72), and Temkin ( R 2 = 0.99) equilibrium isotherms showed that the adsorption process of tetracycline through green magnetic CuFe 12 O 19 /CuS nanocomposite synthesized with Temkin model is compatible. Furthermore, the data obtained from the reaction's kinetic calculations show that the adsorption of tetracycline in this process can be described according to the pseudo-quadratic model ( R 2 = 0.999). Also, based on the results of thermodynamic studies including entropy changes (ΔS = 104.34 J/mol. k), enthalpy changes (ΔH = − 47.71 kJ/mol), and negative Gibbs free energy (ΔG), we conclude that the desired adsorption process is endothermic. Additionally, investigating the recovery and reuse of the synthesized nanocomposite in this research showed that after five consecutive cycles, the efficiency of the adsorbent is reduced by 14.67%. Finally, based on the results obtained in the present study, we may conclude that tetracycline can be removed from aqueous environments by the CuFe 12 O 19 /CuS magnetic nanocomposite synthesized using the green method.

Assessing the performance of non-toxic nanomagnetic modified deep eutectic solvents for tetracycline adsorption: Taguchi approach for optimization

A chemometric approach based on response surface methodology for optimization of antibiotic and organic dyes removal from water samples

Investigating mathematical models for the surface adsorption process of tetracycline antibiotic using a CuFe12O19/CuS green magnetic nanocomposite

Utilizing a novel green ternary polymeric nanocomposite material to remove tetracycline antibiotic effectively from aqueous solutions

Adsorption of tetracycline antibiotics by nitrilotriacetic acid modified magnetic chitosan-based microspheres from aqueous solutions

Green synthesis of manganese ferrite magnetic nanoparticle and its modification with metallic-organic frameworks for the tetracycline adsorption from aqueous solutions: A mathematical study of kinetics, isotherms, and thermodynamics

Magnetic double-core@shell MnO2@NiFe@DE as a multifunctional scavenger for efficient removal of tetracycline, anionic and cationic dyes

Adsorption and Desorption Study of Reusable Magnetic Iron Oxide Nanoparticles Modified with Justicia adhatoda Leaf Extract for the Removal of Textile Dye and Antibiotic

Design and optimization of a novel Y-Fe-GO magnetic adsorbent for simultaneous removal of tetracycline and arsenic and adsorption mechanisms

How to apply terpenoid-based deep eutectic solvents for removal of antibiotics and dyes from water: Theoretical prediction, experimental validation and quantum chemical evaluation

Protocol encompassing ultrasound/Fe3O4 nanoparticles/persulfate for the removal of tetracycline antibiotics from aqueous environments

Highly effective elimination of tetracycline and ciprofloxacin antibiotics from synthetic wastewater by novel magnetic P2W18O62/MIL-101 (Fe)/NiFe2O4 nanocomposite

Eco-friendly tea waste magnetite nanoparticles for enhanced adsorptive removal of norfloxacin and paroxetine from water

Green Synthesis of Zinc Oxide Nanoparticles for Tetracycline Adsorption: Experimental Insights and DFT Study

Efficient Removal of Organic and Inorganic Pollutants from Water Using Fe3O4@SiO2@CS@EDTA Nanocomposite: Optimization via Response Surface Methodology (RSM)

Optimization by Box–Behnken design for environmental contaminants removal using magnetic nanocomposite

Magnetic induced construction of core-shell architecture Fe3O4@TiO2-Co nanocomposites for effective photocatalytic degradation of tetracycline

Combined Effect of Adsorption and Photocatalytic Degradation Using Magnesium Oxide Nano-flowers for Tetracycline Removal

Cu+-Ti Bimetallic Modified SiO2 Nanospheres Synthesized by "One-Pot" In Situ Reduction Method for Efficiently Removing Tetracycline from Aqueous Solution

Insights into High-Efficient Removal of Tetracycline by a Codoped Mesoporous Carbon Adsorbent

Preparation and characterization of chitosan-curdlan composite magnetized by zinc ferrite for efficient adsorption of tetracycline antibiotics in water