Abstract:Microneedles are promising alternatives to pills and traditional needles as drug delivery systems due to their fast, localized, and relatively less painful administration. Filling a knowledge gap, this study investigated and optimized the most influential geometrical factors determining the penetration efficiency of microneedles. The effects of height, base diameter, and tip diameter were analyzed using the finite element method, with results showing that the most influencing factor was base diameter, followed by height. Moreover, the taper angle, which is dependent on all the geometrical factors, was found to directly affect the penetration efficiency at a fixed height. An additional model was developed to relate the height and taper angle to penetration efficiency, and the results were experimentally validated by compression testing of microneedle array prototypes printed using two-photon photolithography. The numerical model closely predicted the experimental results, with a root mean square error of 9.35. The results of our study have the potential to aid the design of high-penetration efficiency microneedles for better functionality and applicability.

What problem does this paper attempt to address?

The problem that this paper attempts to solve is to optimize the geometry of solid conical microneedles (MNs) to improve their penetration efficiency. Specifically, the research aims to analyze the influence of the height, base diameter and tip diameter of microneedles on the penetration efficiency by the finite element method (FEM), and develop a model to describe the relationship between these geometric parameters and the penetration efficiency. In addition, the research also verifies the accuracy of the numerical model through experiments. ### Research Background As a drug delivery system (DDS), microneedles have received extensive attention because of their fast, local and relatively painless drug delivery methods. Traditional drug delivery methods such as oral administration and injection have some limitations, such as drug degradation, poor absorption or long - term kidney and liver side effects. Microneedles can penetrate the stratum corneum (SC) of the skin, thereby achieving efficient drug delivery while avoiding the pain and complexity of traditional needles. ### Research Objectives 1. **Optimize geometric parameters**: Analyze the influence of the height, base diameter and tip diameter of microneedles on the penetration efficiency by the finite element method. 2. **Develop a model**: Establish a model to describe the relationship between these geometric parameters and the penetration efficiency. 3. **Verify experimentally**: Verify the accuracy of the numerical model through experiments. ### Main Findings - **The base diameter has the greatest influence**: The base diameter has the greatest influence on the penetration efficiency of microneedles, followed by the height. A smaller base diameter usually results in higher penetration efficiency. - **The relationship between the taper angle and the penetration efficiency**: The taper angle is an important parameter that depends on all geometric parameters. In the case of a fixed height, the taper angle is negatively correlated with the penetration efficiency. - **The numerical model is consistent with the experimental results**: The prediction results of the numerical model are very close to the experimental results, and the root mean square error (RMSE) is 9.35. ### Conclusion The results of this research are helpful for designing microneedles with high penetration efficiency, thereby improving their functionality and application range. By optimizing the geometry of microneedles, efficient drug delivery can be better achieved and the discomfort of patients can be reduced.

A Penetration Efficiency Model for the Optimization of Solid Conical Microneedles' Geometry

Optimizing Solid Microneedle Design: A Comprehensive ML-Augmented DOE Approach

Optimal Microneedle Design for Drug Delivery Based on Insertion Force Experiments with Variable Geometry

Insights into the mechanics of solid conical microneedle array insertion into skin using the finite element method

Design of three-section microneedle towards low insertion force and high drug delivery amount using the finite element method

Numerical modeling and simulation for microneedles drug delivery: A novel comprehensive swelling-obstruction-mechanics model

Design, fabrication, and penetration assessment of polymeric hollow microneedles with different geometries

Assessment of geometrical dimensions and puncture feasibility of microneedles manufactured by micromilling

Design and Optimize Solid Microneedle using Genetic Algorithm

Contributions in Medical Needle Technologies—geometry, Mechanics, Design, and Manufacturing

Design, Development, and Testing of Polymeric Microblades: A Novel Design of Microneedles for Biomedical Applications

Effect of hollow microneedle geometry structure on mechanical stability and microfluidic flow for transdermal drug delivery applications

Effect of Microneedle Geometry and Supporting Substrate on Microneedle Array Penetration into Skin

Viscoelastic Properties of Polymeric Microneedles Determined by Micromanipulation Measurements and Mathematical Modelling

An Integrated Approach to Control the Penetration Depth of 3D-Printed Hollow Microneedles

Microneedle Arrays for Drug Delivery and Diagnostics: Toward an Optimized Design, Reliable Insertion, and Penetration

Finite Element Analysis of Skin Deformation and Puncture for Microneedle Array Design

Design and Mechanical Characteristics of Novel MEMS Microneedles

Design, modeling and simulation of MEMS-based silicon Microneedles

Fabrication and testing analysis of tapered silicon microneedles for drug delivery applications

Modeling of Microneedle Arrays in Transdermal Drug Delivery Applications