Abstract:Microneedles have garnered considerable attention over the years as a versatile pharmaceutical platform that could be leveraged to deliver drugs into and across the skin. In the current work, poly (N-isopropylacrylamide) (PNIPAm) is synthesized and characterized as a novel material for the development of a physiologically responsive microneedle-based drug delivery system. Typically, this polymer transitions reversibly between a swell state at lower temperatures and a more hydrophobic state at higher temperatures, enabling precise drug release. This study demonstrates that dissolving microneedles patches made from PNIPAm, incorporating BIS-PNIPAm, a crosslinked polymer variant, exhibit enhanced mechanical properties, evident from a smaller height reduction in microneedle (∼10%). Although microneedles using PNIPAm alone were achievable, it displayed poor mechanical strength, requiring the inclusion of additional polymeric excipients like PVA to enhance mechanical properties. In addition, the incorporation of a thermoresponsive polymer did not have a significant (p> 0.05) impact on the insertion properties of the needles as all formulations inserted to a similar depth of 500 μm into ex vivo skin. Furthering this, the needles were loaded with a model payload, 1,1'-dioctadecyl-3,3,3',3'-tetramethylindodicarbocyanine perchlorate (DID) and the deposition of the cargo was monitored via multiphoton microscopy that showed that a deposit is formed at a depth of ≈200 μm. Also, it was revealed that crosslinked-PNIPAm (Bis-PNIPAm) formulations exhibited notable skin accumulationof the dye only after 4 hours, independent of the excipient matrix used. This phenomenon was absent in non-crosslinked PNIPAm formulations, indicating a deposit formation in Bis-PNIPAm microneedle formulation. Collectively, this proof-of-concept study has advanced our understanding on the possibility to use PNIPAm for dissolving microneedle fabrication which could be harnessed for the deposition of nanoparticles into the dermis, for extended drug release within the skin.

Design, fabrication, and penetration assessment of polymeric hollow microneedles with different geometries

Design, Development, and Testing of Polymeric Microblades: A Novel Design of Microneedles for Biomedical Applications

Producing Hollow Polymer Microneedles Using Laser Ablated Molds in an Injection Molding Process

An Integrated Approach to Control the Penetration Depth of 3D-Printed Hollow Microneedles

Hollow Microneedle Arrays Produced by Low‐Cost, High‐Fidelity Replication of Hypodermic Needle Tips for High‐Dose Transdermal Drug Delivery

3D Printed Multi-Functional Hydrogel Microneedles Based on High-Precision Digital Light Processing

3D‐Printed Hollow Microneedles Array with Luer Lock Connection for Facile and Painless Intradermal Injection: A Proof of Concept

Leveraging novel innovative thermoresponsive polymers in microneedles for targeted intradermal deposition

Fabrication and Characterization of Porous Microneedles for Enhanced Fluid Injection and Suction: A Two‐Photon Polymerization Approach

Enhancing Penetration Performance and Drug Delivery of Polymeric Microneedles Using Silica Nanoparticle Coatings

Microfabricated Polysilicon Microneedles for Minimally Invasive Biomedical Devices

A Scalable Fabrication Process of Polymer Microneedles.

Engineering Microneedle Patches for Improved Penetration: Analysis, Skin Models and Factors Affecting Needle Insertion

Investigation on photopolymerization of PEGDA to fabricate high-aspect-ratio microneedles

Recent advances in the design of polymeric microneedles for transdermal drug delivery and biosensing

Increased mechanical stability and permeability by filling the interconnected pores of porous microneedles

Polymer Microneedles with Interconnected Porous Structures Via a Phase Inversion Route for Transdermal Medical Applications.

Hydroxyethyl methacrylate hydrogel microneedles with high mechanical strength and skin penetration by template method

Polyimide (PI) Flexible Hollow Microneedle Array Prepared Based on Optimized Dual-Moulding Processes

Fabrication Methods of Microneedles with Polymeric Materials

Determination of vat-photopolymerization parameters for microneedles fabrication and characterization of HPMC/PVP K90 dissolving microneedles utilizing 3D-printed mold