Abstract:Ultra-thin friction course (UTFC) presents excellent performance in preventative maintenance of asphalt pavement. UTFC could be also used as the wearing course of newly constructed pavements. This study investigated the effects of reclaimed asphalt pavement (RAP) and glass fiber on the fracture behaviors of UTFC at the low and intermediate temperatures. At the low temperature (-10°C), fracture energy, stress intensity factor and cracking resistance index (CRI) were obtained to present the fracture behaviors of three types of UTFC mixtures. At the intermediate temperature (25°C), the size-independent fracture energy considering the tail part of the load–displacement curves were obtained. Besides, J-integral, cracking resistance index (CRI) and balanced cracking index (BCI) were obtained to characterize the intermediate fracture performance. Results indicated that at −10 °C, the incorporation of RAP weakened the fracture resistance of UTFC; while the addition of glass fiber could counteract the adverse effect of RAP. Besides, CRI value of UTFC with glass fiber was the largest, indicating the superior fracture resistance at the low temperature. At 25 °C, UTFC presented the best cracking resistance in terms of fracture energy, J-integral, CRI values and BCI values, indicating the incorporation of RAP could deteriorate the fracture resistance at the intermediate temperature. When both RAP and glass fiber were added in UTFC, the fracture performance was deteriorated furtherly, which may be possibly caused by the non-uniform distribution of fiber. On the other hand, the bonding strength between fiber and asphalt could be mitigated when temperature increased from −10 °C to 25 °C. The size-independent fracture energy of UTFC was the largest, indicating the superior fracture resistance, followed by UTFC-50% RAP-F and UTFC. It was also reported that the incorporation of fiber improved the ability to tolerate deformation.

Enhanced Thermal Insulation of Steel Slag Based on Ultrathin Friction Course with Ceramic Fiber

Laboratory Evaluation On The Performance Of Porous Asphalt Mixture With Steel Slag For Seasonal Frozen Regions

Building the cooling roads with high thermal conductivity pavements to relieve urban heat island effect

Enhancing thermal conductivity of cement-based composites by optimizing pores and adding pitch-based carbon fibers for pavement cooling

Experimental investigation on performance of composite thermochromic and ice-melting coatings for dynamic pavement temperature control

Assessment on Steel Slag–Based SMA-5 and AC-5 Asphalt Mixtures for Maintenance and Induction Heating

Study on thermal properties of steel slag asphalt concrete for snow-melting pavement

Development of Water Retentive and Thermal Resistant Cement Concrete and Cooling Effects Evaluation

Study on the Performance of Epoxy-Modified Asphalt and Steel Slag Ultra-Thin Friction Course

Investigation of the Performance of Ceramic Fiber Modified Asphalt Mixture

Development of Ceramic Thermal Resistance Wearing Course Materials and Performance Test

Performance and Thermal Evaluation of Incorporating Waste Ceramic Aggregates in Wearing Layer of Asphalt Pavement

Study on the performance and sustainability of modified waste crumb rubber and steel slag powder/SBS composite modified asphalt mastic

Effect of Dry–Wet and Freeze–Thaw Repeated Cycles on Water Resistance of Steel Slag Asphalt Mixture

Effect of Fibers on the Performance of a Porous Friction Course.

Roles of waste carbon fibers on the efficiency of multiple induction heating healing behavior in asphalt mixture for sustainable infrastructure

Pre-treatment of steel slag and its applicability in asphalt mixtures for sustainable pavements

Effect of RAP and glass fiber on mode I fracture behaviors of ultra-thin friction course

Influence of basalt fiber on performance of thin overlayer asphalt mixtures based on multiple experimental methods

Investigation of Permanent Deformation Behavior of Steel Slag Asphalt Mixture under Indoor Simulation

Microwave heating uniformity, road performance and internal void characteristics of steel slag asphalt mixtures