Abstract:This study explores the potential applications of steel slag and tire pyrolysis oil (TPO) in creating self-healing road construction materials, aiming to address environmental concerns related to industrial waste and to extend the service life of roadways. A novel functional steel slag asphalt mixture was developed, utilizing steel slag as the aggregate and TPO as a healing agent. This agent permeates the pores of the steel slag, with microwave induction facilitating its controlled release. The research embarked on identifying the optimal process for preparing the functional steel slag aggregate through orthogonal experiments. It puts forward the optimum parameters of microwave induction based on the results of the low-temperature bending beam test and evaluates the effectiveness of the microwave-induced asphalt mixture's self-healing. The study revealed that the recommended process for preparing functional steel slag aggregates is vacuuming the steel slag submerged in TPO for 30 minutes, followed by a soaking period of 10 minutes under standard atmospheric pressure, and concluding with a 48-hour standing period after removal from the TPO. Under this process, the absorption rate of TPO by steel slag reaches its maximum. Employing the Marshall test design method, the optimal asphalt-aggregate ratio was determined to be 5.15%. Significantly, the microwave heating rate of the functional steel slag asphalt mixture was found to be 3.25 times that of a conventional limestone asphalt mixture. The recommended microwave induction parameters were established at 700 W of power for a duration of 80 seconds. Initially, the crack healing rate reached 64.6%, which decreased to 47.6% after five microwave cycles. Remarkably, the healing rate of the functional steel slag asphalt mixture outperformed that of the ordinary steel slag asphalt mixture without TPO by 69.5% after the same number of cycles. These findings offer valuable contributions to the development of self-healing road construction materials, presenting a promising path for enhancing the durability of road infrastructures while addressing environmental challenges posed by industrial waste.

Microwave heating uniformity, road performance and internal void characteristics of steel slag asphalt mixtures

Laboratory Evaluation On The Performance Of Porous Asphalt Mixture With Steel Slag For Seasonal Frozen Regions

Mechanical Performance Of Warm-Mixed Porous Asphalt Mixture With Steel Slag And Crumb-Rubber-Sbs Modified Bitumen For Seasonal Frozen Regions

Microwave Absorption Ability of Steel Slag and Road Performance of Asphalt Mixtures Incorporating Steel Slag

Investigation on the temperature distribution characteristics of steel slag asphalt mixture under different microwave heating and cooling methods

Evaluation of self-healing properties of asphalt mixture containing steel slag under microwave heating: Mechanical, thermal transfer and voids microstructural characteristics

Temperature analyses of porous asphalt mixture using steel slag aggregates heated by microwave through laboratory tests and numerical simulations

Influence of Microwave Heating on The Microscopic Characteristics of Cement Emulsified Asphalt Mixture Containing Steel Slag

Microwave Heating Characteristics of Emulsified Asphalt Repair Materials Incorporated with Steel Slag

Self-healing analysis of steel slag asphalt mixture under microwave heating through laboratory fatigue-healing test and microscopic characterization method

Enhanced Induction Heating and Self-Healing Properties of Steel Slag Powder Based Asphalt and Asphalt Mixture under Microwave Irradiation

Improved microwave heating uniformity and self-healing properties of steel slag asphalt containing ferrite filler

Microwave heating moment, thermal characteristics, and structural variations of different steel slag asphalt mixtures suffered from freeze-thaw damage

Research on Water Stability and Moisture Damage Mechanism of a Steel Slag Porous Asphalt Mixture

Pre-treatment of steel slag and its applicability in asphalt mixtures for sustainable pavements

Recycling of steel slag in sustainable bituminous mixtures: Self-healing performance, mechanism, environmental and economic analyses

Research on the preparation and self-healing performance of microwave-induced functional steel slag asphalt mixture

The Effect of Microwave Radiation on the Self-Healing Performance of Asphalt Mixtures with Steel Slag Aggregates and Steel Fibers

Study on pavement performance of steel slag asphalt mixture based on surface treatment

Study on thermal properties of steel slag asphalt concrete for snow-melting pavement

Surface Modification of Steel Slag Aggregate for Engineering Application in Asphalt Mixture