Abstract:Key Points Development of a measurement procedure for Rb isotope data (δ87RbSRM984) of low‐Rb geological materials using MC‐ICP‐MS. The Rb loading amount was reduced significantly to 20 ng. The long‐term (over one year) intermediate measurement precision was better than 0.05‰ (2 standard deviations). The rubidium (Rb) isotope system has the potential to trace planetary evolution, magmatic‐fluid interaction and chemical weathering. These applications are based on Rb isotope measurement results with precisions fit for purpose, but measurements of low‐Rb geological materials are challenging due to large sample consumption and overload of ion‐exchange resin. Here we developed a measurement procedure for Rb isotope data (δ87RbSRM984) of low‐Rb geological materials using MC‐ICP‐MS. Using an Aridus III desolvator and Ni standard sampler + Ni X skimmer cone combination, the Rb loading amount was reduced significantly to 20 ng. A comparison between two methods for instrumental mass‐bias correction, the sample‐standard bracketing and combined sample‐standard bracketing and internal (Zr) normalisation (C‐SSBIN), shows that C‐SSBIN could produce Rb isotope data with better intermediate measurement precisions but strictly restricted to optimal Zr/Rb ratio. The robustness of this method was demonstrated by monitoring δ87RbSRM984 data of two in‐house Rb isotope standards, replicates, some reference materials with δ87RbSRM984 values previously reported, and element‐doped and matrix‐spiked synthetic solutions. Based on repeated measurements of Rb isotope standards and reference materials, the long‐term (over one year) intermediate precision was better than 0.05‰ (2s, standard deviations). We additionally recommend thirteen reliable reference materials for future Rb isotope ratio measurements.

Highly sensitive spectral measurement of rubidium isotopes using the open multi-pass cell in tunable diode laser absorption spectroscopy

Spectral analysis and pressure broadening mechanism of laser diode-pumped rubidium vapor laser D 1 and D 2 lines

Measurement of Nitric Oxide with Low Concentration Based on Mid-Infrared Laser Absorption Spectroscopy

Measurements of CO2 Temperature and Concentration in High Temperature Environment Based on Tunable Diode Laser Absorption Spectroscopy

Improving the Sensitivity of an Optically Pumped Rubidium Atomic Magnetometer by Using of a Repumping Laser Beam

Pulsed high magnetic field measurement via a Rubidium vapor sensor

NO Concentration Sensing at 1.79 Μm Transition Using Tunable Diode Laser Absorption Spectroscopy

A Multi-Pass Optically Pumped Rubidium Atomic Magnetometer with Free Induction Decay

In-situ Doppler-free spectroscopy and laser frequency stabilization based on time-division multiplexing differential saturated absorption

Measurement of hyperfine constants and the isotope shift of rubidium 5P$_{1/2}$ excited-state using Saturated Absorption Spectroscopy

Multi-Parameter Optimization of Rubidium Laser Optically Pumped Magnetometers with Geomagnetic Field Intensity

Artificial Absorption Creation for More Accurate Tunable Diode Laser Absorption Spectroscopy Measurement

Portable cavity ring-down spectrometer for an HO2 radical measurement: instrument's performance and potential improvement using a narrow linewidth laser

Rubidium Isotope Measurements of Low‐Rb Geological Materials by MC‐ICP‐MS

Rubidium spectroscopy at 778–780 nm with a distributed feedback laser diode

Modulation Transfer Spectroscopy for D1 Transition Line of Rubidium

Ultra-Stable Rubidium-Stabilized External-Cavity Diode Laser Based on the Modulation Transfer Spectroscopy Technique

Sensitive Discrete Frequency Mid-Infrared Absorption Spectroscopy Using Digitally Referenced Detection

Rapid, Time-Division Multiplexed, Direct Absorption- and Wavelength Modulation-Spectroscopy

Measurement of the D/H, 18O/16O, and 17O/16O Isotope Ratios in Water by Laser Absorption Spectroscopy at 2.73 μm

Measurement of Lithium Isotope Ratio Using Tunable External Cavity Diode Laser