Abstract:Fe-based amorphous materials offer new opportunities for magnetic sensors, actuators, and magnetostrictive transducers due to their high saturation magnetostriction (λs = 20–40 ppm) and low coercive field compared with polycrystalline Fe-based alloys, which have high magnetostriction but large coercive fields and Co-based amorphous alloys with small magnetostriction (λs = −3 to −5 ppm). Additive layer manufacturing (ALM) offers a new fabrication technique for more complex net-shaping designs. This paper reviews the two different ALM techniques that have been used to fabricate Fe-based amorphous magnetic materials, including the structural and magnetic properties. Selective laser melting (SLM)—a powder-bed fusion technique—and laser-engineered net shaping (LENS)—a directed energy deposition method—have both been utilised to fabricate amorphous alloys, owing to their high availability and low cost within the literature. Two different scanning strategies have been introduced by using the SLM technique. The first strategy is a double-scanning strategy, which gives rise to maximum relative density of 96% and corresponding magnetic saturation of 1.22 T. It also improved the glassy phase content by an order of magnitude of 47%, as well as improving magnetic properties (decreasing coercivity to 1591.5 A/m and increasing magnetic permeability to around 100 at 100 Hz). The second is a novel scanning strategy, which involves two-step melting: preliminary laser melting and short pulse amorphisation. This increased the amorphous phase fraction to a value of up to 89.6%, and relative density up to 94.1%, and lowered coercivity to 238 A/m. On the other hand, the LENS technique has not been utilised as much as SLM in the production of amorphous alloys owing to its lower geometric accuracy (0.25 mm) and lower surface quality, despite its benefits such as providing superior mechanical properties, controlled composition and microstructure. As a result, it has been commonly used for large parts with low complexity and for repairing them, limiting the production of amorphous alloys because of the size limitation. This paper provides a comprehensive review of these techniques for Fe-based amorphous magnetic materials.

Laser punching of soft magnetic Fe-based amorphous ribbons

Laser Drilling Process of Fe78Si9B13 Amorphous Alloy Foil

Amorphous-crystalline nanostructured Nd-Fe-B permanent magnets using laser powder bed fusion: Metallurgy and magnetic properties

Effect of WEDM Electrical Parameters on Micro-morphology and Magnetic Properties of Stacked Amorphous Iron Cores

Laser Additive Manufacturing of Fe-Based Magnetic Amorphous Alloys

Laser powder bed fusion of a nanocrystalline Finemet Fe-based alloy for soft magnetic applications

Laser assisted crystallization of ferromagnetic amorphous ribbons: A multimodal characterization and thermal model study

The Microstructure and Magnetic Properties of a Soft Magnetic Fe-12Al Alloy Additively Manufactured via Laser Powder Bed Fusion (L-PBF)

Simulation and Experimental Study of Laser Processing NdFeB Microarray Structure

An effective laser in-situ re-scanning strategy in laser powder bed fusion of Nd-Fe-B permanent magnets: Crack reduction and magnetic properties enhancement

Evaluation of Microstructure, Mechanical and Magnetic Properties of Laser Powder Bed Fused Fe-Si Alloy for 3D magnetic flux motor application

Processing of Soft Magnetic Fine Powders Directly from As-Spun Partial Crystalline Fe 77 Ni 5.5 Co 5.5 Zr 7 B 4 Cu Ribbon Via Ball Mill Without Devitrification

Laser-generated nanoparticles from Fe-based metallic glass in water and its amorphization control by pulsed laser processing

Ultrasonic assisted micro-shear punching of amorphous alloy

Recent progress in Fe-based amorphous and nanocrystalline soft magnetic materials

Ultra-low core loss and high permeability Fe-based amorphous soft magnetic composites with ultra-fine FeNi additives

Near net shape fabrication of anisotropic Fe-6.5%Si soft magnetic materials

Effect of Laser Irradiation and Tensile Stress on Microstructure and Magnetic Properties of Fe-Based Amorphous Alloys

Texture, Microstructure, and Properties of Fe-Cr-Co Permanent Magnetic Alloy Fabricated by Laser Powder Bed Fusion In-Situ Alloying

Synthesis of small-sized spherical Fe-based amorphous powders with insulating nanolayer from ribbon electrodes

Research on Deterioration Mechanism and High-Precision Modelling of the Core Loss for Amorphous Alloys after Wire-Cut Electric Discharge Machining