Abstract:A comprehensive modeling framework for the thermoforming of polymer matrix woven laminate composite was developed. Two numerical indicators, the slip path length and traction magnitude, have been identified to be positively correlated to matrix smearing and wrinkling defects. The material model has been calibrated with picture-frame experimental results, and the prediction accuracy for intra-ply shear and thickness distribution was examined with measurements of the physically formed parts. Specifically, thickness prediction for most locations on the formed parts was accurate within an 11.6% error margin. However, at two points with significant intra-ply shear, the prediction errors increased to around 20%. Finally, a parametric study was conducted to determine the relationship between various process parameters and the quality of the formed part. For the trapezoidal part, orienting the laminate at 45 degrees to the mold axis reduces the likelihood of matrix smear and wrinkling defects. Although this laminate orientation yielded a greater spatial variation in part thickness, the thickness deviation is lower than that for the 0-degree orientation case. Two forming analyses were conducted with ramp rates of 25 mm/s and 80 mm/s to match the equipment's operational limits. It was observed that higher forming rates led to a greater likelihood of defects, as evidenced by a 15% and 10% increase in the formed part areas with longer slip paths and higher traction magnitudes, respectively. It was discovered that shallower molds benefit from faster ramp rates, while deeper molds require slower rates to manage extensive shearing, stretching and bending. Faster forming rates lead to smaller thickness increases at high intra-ply shear regions, indicating a shift from intra-ply shear to out-of-plane bending due to the visco-plastic effect of the molten laminate and can negatively impact part quality. Lastly, it was shown that a well-conceived strategy using darts could improve the part quality by reducing the magnitude of the defect indicators.

Analysis and improvement of the VTT mold growth model: Application to bamboo fiberboard

Risk Assessment of Mold Growth on Engineered Bamboo and Its Application

The prediction of effective thermal conductivities perpendicular to the fibres of wood using a fractal model and an improved transient measurement technique

Fractal model for predicting effective thermal conductivity perpendicular to fibres of wood

Toward a logistic model of dynamic mold growth on wood

An Algorithm for Automatically Establishing a Multi- Parameter RVE Model for Z-Pin Composite Laminates

Design Optimization of Molds for Autoclave Process of Composite Manufacturing

Modeling the nonlinear creep behavior of Entandrophragma cylindricum wood by a fractional derivative model

Numerical investigation of the effect of thermal gradients on curing performance of autoclaved laminates

Mathematical Modeling Analysis and Optimization of Fungal Diversity Growth

Prediction Distribution Model of Moisture Content in Laminated Wood Components

Rheological Model for Wood

A Predictive Model for the Growth Diameter of Mold under Different Temperatures and Relative Humidities in Indoor Environments

Effect of mold on curing deformation of resin transfer molding‐made textile composites

A Modeling Framework for the Thermoforming of Carbon Fiber Reinforced Thermoplastic Composites

Thermal Behaviors of the Resin and Mold in the Process of Resin Transfer Molding

Micromechanical Modeling in Determining the Transverse Elastic Moduli and Stress Distributions of Bamboo

A Study on Process-Induced Warpage of Curing Mold of Composite Structures

Verification and Validation of finite element models for laminated timber structures using solid, solid-beam and solid-shell approaches

Modelling the Response of Timber Beams Under Fire