Abstract:As a very promising additive manufacturing (AM) technique, selective laser melting (SLM) has gained considerable attentions due to the feasibility of producing light-weight metallic components directly from virtual design data. On the other hand, high strength, low density and high corrosion resistance Ti-6Al-4V alloy has been a preferred AM used material for the aviation and military industries. However, the fatigue damage behaviors of SLMed or AMed components usually suffer from interior defects such as incomplete fusion and gas pores due to unstable process or unsuitable processing parameters. Therefore, thorough investigations on process-induced and metallurgical defects and its influence on the fatigue behavior is required for robust designs and engineering applications of high performance SLM components. As an advanced characterization approach, synchrotron radiation micro computed X-ray tomography (SR -mu CT) has been recently to investigate the fatigue damage behaviors of critical components with defects. Based on self-developed in situ fatigue testing rig fully compatible with the BL13W1 at Shanghai Synchrotron Radiation Facility (SSRF), several AMed specimens were prepared for in situ fatigue SR - mu CT. The Feret diameter and extreme values statistics were then adopted to characterize the defect size, morphology, population, location and the influence on fatigue life. Fatigue fractography was also examined to further identify the defect to really initiate a fatigue crack. Results show that two types of defects including gas pores and the lack of fusion can be clearly distinguished inside SLM Ti-6Al-4V alloys. Fatigue crack with a typical semi-ellipse usually initiates from the defects at the surface and near the surface. Besides, the defects less than 50 mu m and sphericity of 0.4 similar to 0.65 dominate for the SLM Ti-6Al-4V alloys. It is also found that the larger the characteristic size of the defect, the lower the fatigue life. Current results can provide a theoretical basis and support to predict the fatigue performance of SLM Ti-6Al-4V alloys. Further investigations should be performed on the relationship between the critical defect and fatigue strength by introducing the Kitagawa-Takahashi diagram.

Prediction of anisotropic LCF behavior for SLM Ti-6Al-4V considering the spatial orientation of defects

Defect characteristics-based low-cycle fatigue life prediction model for additive manufactured Ti-6Al-4 V alloys

Low-cycle Fatigue Behavior and Life Prediction of TA15 Titanium Alloy by Crystal Plasticity-Based Modelling

A Combined CP Theory and TCD for Predicting Fatigue Lifetime in Single-Crystal Superalloy Plates with Film Cooling Holes

A New Approach to Correlate the Defect Population with the Fatigue Life of Selective Laser Melted Ti-6Al-4V Alloy

Prediction of High Cycle Fatigue Strength for Additive Manufactured Metals by Defects Incorporated Crystal Plasticity Modeling

A Crystallographic Model for the Orientation Dependence of Low Cyclic Fatigue Property of a Nickel-Base Single Crystal Superalloy

A Novel Defect-Related Cyclic Damage Model Driven by Strain Energy Density for LPBF Titanium Alloy

Anisotropic High Cycle Fatigue Property Estimation for Laser Additive Manufactured Ti6Al4V Alloy Dependence on Tomographic Imaging of Defect Population

Critical physics informed fatigue life prediction of laser 3D printed AlSi10Mg alloys with mass internal defects

Fatigue life prediction for LPBF-fabricated Ti-6Al-4V up to very-high-cycle regime based on continuum damage mechanics incorporating effect of defects

The Low-Cycle Fatigue Behavior, Failure Mechanism and Prediction of SLM Ti-6Al-4V Alloy with Different Heat Treatment Methods

Defect Induced Fatigue Behaviors of Selective Laser Melted Ti-6Al-4V Via Synchrotron Radiation X-Ray Tomography

Systematic Methodology for High Temperature LCF Life Prediction of Smooth and Notched Ni-based Superalloy with and Without Dwells

X-ray imaging of defect population and the effect on high cycle fatigue life of laser additive manufactured Ti6Al4V alloys

A modified SWT model for very high cycle fatigue life prediction of L-PBF Ti-6Al-4 V alloy based on Single Defect: Effect of building orientation

A novel LCF lifetime model for PM superalloys considering crack energy differences induced by surface underconstraint

Fatigue limit prediction model and fatigue crack growth mechanism for selective laser melting Ti6Al4V samples with inherent defects

Fatigue Performance of Laser Powder Bed Fusion Manufactured TiB2/AlSi10Mg Composite: Experimental Investigation and Fracture Mechanics-Based Life Prediction Model for Defect Tolerance Analysis

Combined Notch and Size Effect Modeling of Metallic Materials for LCF Using Plasticity Reformulated Critical Distance Theory

Low Cycle Fatigue Lifetime and Deformation Behaviour Prediction of Nickel-Based Single Crystal Superalloy Considering Thickness Debit Effect