Abstract:An in situ electrodeposition method is employed to modulate the catalyst coverage on the microporous layer, enabling a wide‐ranging adjustment of the microenvironment hydrophobicity. Enhanced hydrophobicity significantly facilitates the yield of multi‐carbon species and suppresses the parasitic hydrogen evolution. And the phenomenon can be further extended to an industrially relevant slurry‐based approach with hydrophobic microspheres. Operating electrochemical CO2 reduction reaction (CO2RR) in acidic media has garnered considerable attention due to its sustainable electrolyte cycling and stable performance. Nevertheless, the severe parasitic hydrogen evolution reaction (HER) and decayed multi‐carbon species (C2+) yield still hampers efficient CO2RR in acid. Here, this work investigates the influence of local hydrophobicity on the acidic CO2RR. By employing direct electrodeposition, the hydrophobicity of the catalyst layer can be finely tuned over a wide range without additive. It is revealed that the hydrophobic microenvironment significantly suppressed HER, improved CO2RR performance and boosted C2+ yield. A Faradaic efficiency (FE) of ≈74% for C2+ is achieved in pH = 2 on electrodeposited copper with a highly hydrophobic environment. Moreover, this phenomenon can be extended to industrial application. An ≈81% total FE for the CO2RR, along with a ≈62% FE for C2+ species, is achieved even with commercial copper. Remarkably, the system exhibited stable operation for a continuous period exceeding 50 h at an industrially applied current density of 300 mA cm−2. This work highlights the crucial role of interface hydrophobicity in acidic CO2RR and proposes a facile and universally applicable method for achieving efficient and stable CO2RR to high‐value products in acidic media.

What problem does this paper attempt to address?

This paper attempts to solve the problems of severe hydrogen evolution reaction (HER) and low yield of multi - carbon products (C2+) during the electro - reduction reaction of carbon dioxide (CO2RR) in an acidic medium. Specifically, the study focuses on how to overcome these problems by adjusting the local hydrophobicity of the catalyst micro - environment, in order to improve the efficiency and stability of CO2RR and promote the production of high - value multi - carbon products. ### Core problems of the paper 1. **Inhibition of hydrogen evolution reaction (HER)**: Under acidic conditions, due to the presence of a large number of protons, the HER reaction is very active, which not only consumes a large number of electrons, but also reduces the selectivity and efficiency of CO2RR. 2. **Improvement of the yield of multi - carbon products (C2+)**: In an acidic environment, the yield of C2+ products is usually low, which limits the practical application value of CO2RR. ### Solutions 1. **Regulation of local hydrophobicity**: Through the direct electrodeposition technique, researchers can finely adjust the hydrophobicity of the catalyst layer within a wide range without adding other substances. 2. **Experimental methods**: - Use the electrodeposition method to prepare a copper catalyst layer on carbon paper, and adjust the coverage rate and hydrophobicity of the catalyst by controlling the electrodeposition time. - Characterize the structure and chemical state of the catalyst by means of scanning electron microscopy (SEM), X - ray diffraction (XRD) and X - ray photoelectron spectroscopy (XPS). - Conduct linear sweep voltammetry (LSV) tests on electrodes with different contact angles to evaluate the activities of HER and CO2RR. 3. **Extension of industrial applications**: In order to verify the feasibility of this method on an industrial scale, researchers prepared a catalyst slurry using polytetrafluoroethylene (PTFE) microspheres and carried out performance tests. ### Main findings - **Significant inhibition of HER**: By enhancing the local hydrophobicity, the current density of the hydrogen evolution reaction is significantly reduced, and the onset potential shifts to a more negative direction. - **Improvement of CO2RR performance**: In a highly hydrophobic environment, the copper electrode achieves a Faraday efficiency (FE) of about 74% for C2+ products at pH = 2. - **Verification of industrial applications**: The electrode prepared using commercial copper powder and PTFE microspheres has a Faraday efficiency of about 62% for C2+ products when continuously operating for more than 50 hours at a current density of 300 mA cm\(^{-2}\). ### Mechanism understanding - **Role of the hydrophobic interface**: Through AIMD simulations, researchers found that the hydrophobic interface can limit the diffusion of OH\(^-\) ions, making them enter the "dormant mode", thereby reducing the desorption of *OH species, promoting C─C coupling, and increasing the production of multi - carbon products. ### Conclusion This study shows that by adjusting the local hydrophobicity of the catalyst micro - environment, the hydrogen evolution reaction can be effectively inhibited under acidic conditions, while promoting the production of multi - carbon products. This simple and generally applicable method provides a new way to efficiently promote the electro - reduction of CO2 to produce high - value products.

Overcoming Low C2+ Yield in Acidic CO2 Electroreduction: Modulating Local Hydrophobicity for Enhanced Performance

Superaerophilic copper nanowires for efficient and switchable CO 2 electroreduction.

Precise Site-Hydrophobicity Modulation for Boosting High-Performance CO 2 Electroreduction

Confinement of an Alkaline Environment for Electrocatalytic CO2 Reduction in Acidic Electrolytes.

Molecular-Scale Insights into Electrochemical Reduction of CO 2 on Hydrophobically Modified Cu Surfaces

Insights into the hydrophobic surface promoting electrochemical CO2 reduction to ethylene

Selective CO2 Electroreduction to Multi-Carbon Products on Organic-Functionalized CuO Nanoparticles by Local Micro-Environment Modulation

Promoting CO2 Electroreduction to Multi-Carbon Products by Hydrophobicity-Induced Electro-Kinetic Retardation.

Achieving High Single-Pass Carbon Conversion Efficiencies in Durable CO2 Electroreduction in Strong Acids via Electrode Structure Engineering

Suppression of the Hydrogen Evolution Reaction Is the Key: Selective Electrosynthesis of Formate from CO2 over Porous In55Cu45 Catalysts

Pd-induced polarized Cu0-Cu+ sites for electrocatalytic CO2-to-C2+ conversion in acidic medium

Enhancing carbon dioxide gas-diffusion electrolysis by creating a hydrophobic catalyst microenvironment

Surface Hydroxyl Groups Enhance Ethylene Selectivity in Acidic CO2 Reduction Reaction

Surface Hydroxide Promotes CO2 Electrolysis to Ethylene in Acidic Conditions

Anionic Surfactant-Tailored Interfacial Microenvironment for Boosting Electrochemical CO2 Reduction

Surface regulation of Cu-based catalysts to adjust the selectivity and promotion strategy of electrochemical reduction of CO2 to C2 products

Electrolyte Driven Highly Selective CO2 Electroreduction at Low Overpotentials

Selective and stable CO 2 electroreduction at high rates via control of local H 2 O/CO 2 ratio

Promoting Electrocatalytic Reduction of CO 2 to C 2 H 4 Production by Inhibiting C 2 H 5 OH Desorption from Cu 2 O/C Composite

Hierarchical Copper with Inherent Hydrophobicity Mitigates Electrode Flooding for High-Rate CO 2 Electroreduction to Multicarbon Products

Tailoring Interlayer Microenvironment of 2D Layered Double Hydroxides for CO2 Reduction with Enhanced C2+ Production