Contribution to Ischemic Injury of Rat Optic Nerves by Intracellular Sodium Overload

C. Dong,W. Hare

DOI: https://doi.org/10.1007/s10633-005-7339-8

2004-05-01

Documenta Ophthalmologica

Abstract:

What problem does this paper attempt to address?

Surface passivation for highly active, selective, stable, and scalable CO2 electroreduction

Jiexin Zhu,Jiantao Li,Ruihu Lu,Ruohan Yu,Shiyong Zhao,Chengbo Li,Lei Lv,Lixue Xia,Xingbao Chen,Wenwei Cai,Jiashen Meng,Wei Zhang,Xuelei Pan,Xufeng Hong,Yuhang Dai,Yu Mao,Jiong Li,Liang Zhou,Guanjie He,Quanquan Pang,Yan Zhao,Chuan Xia,Ziyun Wang,Liming Dai,Liqiang Mai

DOI: https://doi.org/10.1038/s41467-023-40342-6

IF: 16.6

2023-08-03

Nature Communications

Abstract:Abstract Electrochemical conversion of CO 2 to formic acid using Bismuth catalysts is one the most promising pathways for industrialization. However, it is still difficult to achieve high formic acid production at wide voltage intervals and industrial current densities because the Bi catalysts are often poisoned by oxygenated species. Herein, we report a Bi 3 S 2 nanowire-ascorbic acid hybrid catalyst that simultaneously improves formic acid selectivity, activity, and stability at high applied voltages. Specifically, a more than 95% faraday efficiency was achieved for the formate formation over a wide potential range above 1.0 V and at ampere-level current densities. The observed excellent catalytic performance was attributable to a unique reconstruction mechanism to form more defective sites while the ascorbic acid layer further stabilized the defective sites by trapping the poisoning hydroxyl groups. When used in an all-solid-state reactor system, the newly developed catalyst achieved efficient production of pure formic acid over 120 hours at 50 mA cm –2 (200 mA cell current).

multidisciplinary sciences
A Classification Based Approach for Root Unknown Phylogenetic Networks Under Constrained Recombination

M. A. Zahid,A. Mittal,R. C. Joshi

DOI: https://doi.org/10.1007/11604655_66

2005-12-22

Abstract:
Surface Reconstruction with a Sandwich-like C/Cu/C Catalyst for Selective and Stable CO 2 Electroreduction

Wei Ni,Zhou Yixiang,Yebo Yao,Xiaoxuan Wang,Rui Zhao,Zhiyu Yang,Xin Li,Yi-Ming Yan

DOI: https://doi.org/10.1021/acsami.1c23662

2022-03-08

Abstract:For the steady electroreduction of carbon dioxide (CO2RR) to value-added chemicals with high efficiency, the uncontrollable surface reconstruction under highly reducing conditions is a critical issue in electrocatalyst design. Herein, we construct a catalyst model with a sandwich-like structure composed of highly reactive metallic Cu nanosheet that is confined in thin carbon layers (denoted as C/Cu/C nanosheet). The sandwich-like C/Cu/C nanosheet avoids the oxidation of the active site of metallic Cu at an ambient atmosphere owing to the protective coating of the carbon layer, which inhibits the surface reconstruction that occurs via the dissolution of copper oxides and redeposition of dissolved Cu ions. The as-prepared C/Cu/C nanosheet exhibits a prominent Faradaic efficiency (FE) of 47.8% for CH4 products at −1.0 V with a current density of 20.3 mA·cm–2 and stable production of CH4 during 12 h operation with negligible selectivity loss. Our findings provide an effective strategy of restraining surface reconstruction for the design of selective and stable electrocatalysts toward CO2RR.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.1c23662.Preparation of electrocatalysts, structural characterizations, electrochemical measurements, and computational details (PDF)This article has not yet been cited by other publications.

materials science, multidisciplinary,nanoscience & nanotechnology
Circulating levels of pregnancy zone protein: normal range and the influence of age and gender.

J. Folkersen,B. Teisner,N. Grunnet,J. Grudzinskas,J. Westergaard,P. Hindersson

DOI: https://doi.org/10.1016/0009-8981(81)90343-0

1981-03-05

Abstract:
Anionic Ionomer: Released Surface-Immobilized Cations and an Established Hydrophobic Microenvironment for Efficient and Durable CO2-to-Ethylene Electrosynthesis at High Current over One Month

Mingwei Fang,Xiang Miao,Zihao Huang,Meiling Wang,Xiaochen Feng,Zewen Wang,Ying Zhu,Liming Dai,Lei Jiang

DOI: https://doi.org/10.1021/jacs.4c09168

2024-10-02

Abstract:Electrosynthesis of multicarbon products, such as C2H4, from CO2 reduction on copper (Cu) catalysts holds promise for achieving carbon neutrality. However, maintaining a steady high current-level C2H4 electrosynthesis still encounters challenges, arising from unstable alkalinity and carbonate precipitation caused by undesired ion migration at the cathode under a repulsive electric field. To address these issues, we propose a universal "charge release" concept by incorporating tiny amounts of an oppositely charged anionic ionomer (e.g., perfluorinated sulfonic acid, PFSA) into a cationic covalent organic framework on the Cu surface (cCOF/PFSA). This strategy effectively releases the hidden positive charge within the cCOF, enhancing surface immobilization of cations to impede both outward migration of generated OH- and inward migration of cations, inhibiting carbonate precipitation and creating a strong alkaline microenvironment. Meanwhile, the ionomer's hydrophobic chains create a hydrophobic environment within the cCOF, facilitating efficient gas transport. In situ characterizations and theoretical calculations demonstrate that the cCOF/PFSA catalyst establishes a hydrophobic strong alkaline microenvironment, optimizing the adsorption strength and configuration of *CO intermediates to promote the C2H4 formation. The optimized catalyst achieves a 70.5% Faradaic efficiency for C2H4 with a partial current density over 470 mA cm-2. Notably, it delivers a high single-pass carbon efficiency of 96.5% for CO2RR and sustains an exceptional stability over 760 h. When implemented in a large-area MEA electrolyzer and a 5-cell MEA stack, the system achieves an industrial current of 15 A and continuous C2H4 production exceeding 19 mL min-1, marking a significant step toward industrial feasibility in CO2RR-to-C2H4 conversion.
Coverage enhancement accelerates acidic CO2 electrolysis at ampere-level current with high energy and carbon efficiencies

Xiaohan Yu,Yuting Xu,Le Li,Mingzhe Zhang,Wenhao Qin,Fanglin Che,Miao Zhong

DOI: https://doi.org/10.1038/s41467-024-45988-4

IF: 16.6

2024-02-24

Nature Communications

Abstract:Abstract Acidic CO 2 electroreduction (CO 2 R) using renewable electricity holds promise for high-efficiency generation of storable liquid chemicals with up to 100% CO 2 utilization. However, the strong parasitic hydrogen evolution reaction (HER) limits its selectivity and energy efficiency (EE), especially at ampere-level current densities. Here we present that enhancing CO 2 R intermediate coverage on catalysts promotes CO 2 R and concurrently suppresses HER. We identified and engineered robust Cu 6 Sn 5 catalysts with strong * OCHO affinity and weak * H binding, achieving 91% Faradaic efficiency (FE) for formic acid (FA) production at 1.2 A cm −2 and pH 1. Notably, the single-pass carbon efficiency reaches a new benchmark of 77.4% at 0.5 A cm −2 over 300 hours. In situ electrochemical Fourier-transform infrared spectroscopy revealed Cu 6 Sn 5 enhances * OCHO coverage ~2.8× compared to Sn at pH 1. Using a cation-free, solid-state-electrolyte-based membrane-electrode-assembly, we produce 0.36 M pure FA at 88% FE over 130 hours with a marked full-cell EE of 37%.

multidisciplinary sciences
Overcoming Low C2+ Yield in Acidic CO2 Electroreduction: Modulating Local Hydrophobicity for Enhanced Performance

Zhe Yao,Rui Lin

DOI: https://doi.org/10.1002/smll.202306686

IF: 13.3

2023-12-12

Small

Abstract:An in situ electrodeposition method is employed to modulate the catalyst coverage on the microporous layer, enabling a wide‐ranging adjustment of the microenvironment hydrophobicity. Enhanced hydrophobicity significantly facilitates the yield of multi‐carbon species and suppresses the parasitic hydrogen evolution. And the phenomenon can be further extended to an industrially relevant slurry‐based approach with hydrophobic microspheres. Operating electrochemical CO2 reduction reaction (CO2RR) in acidic media has garnered considerable attention due to its sustainable electrolyte cycling and stable performance. Nevertheless, the severe parasitic hydrogen evolution reaction (HER) and decayed multi‐carbon species (C2+) yield still hampers efficient CO2RR in acid. Here, this work investigates the influence of local hydrophobicity on the acidic CO2RR. By employing direct electrodeposition, the hydrophobicity of the catalyst layer can be finely tuned over a wide range without additive. It is revealed that the hydrophobic microenvironment significantly suppressed HER, improved CO2RR performance and boosted C2+ yield. A Faradaic efficiency (FE) of ≈74% for C2+ is achieved in pH = 2 on electrodeposited copper with a highly hydrophobic environment. Moreover, this phenomenon can be extended to industrial application. An ≈81% total FE for the CO2RR, along with a ≈62% FE for C2+ species, is achieved even with commercial copper. Remarkably, the system exhibited stable operation for a continuous period exceeding 50 h at an industrially applied current density of 300 mA cm−2. This work highlights the crucial role of interface hydrophobicity in acidic CO2RR and proposes a facile and universally applicable method for achieving efficient and stable CO2RR to high‐value products in acidic media.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Engineering the Local Microenvironment over Bi Nanosheets for Highly Selective Electrocatalytic Conversion of CO 2 to HCOOH in Strong Acid

Yan Qiao,Wenchuan Lai,Kai Huang,Tingting Yu,Qiyou Wang,Lei Gao,Zhilong Yang,Zesong Ma,Tulai Sun,Min Liu,Cheng Lian,Hongwen Huang

DOI: https://doi.org/10.1021/acscatal.1c05135

IF: 12.9

2022-02-01

ACS Catalysis

Abstract:The extensive deployment of the electrocatalytic CO2 reduction reaction (CO2RR) is presently limited by the utilization of alkaline/neutral electrolytes in which carbonate formation severely reduces the carbon efficiency and electrolysis stability. By contrast, the CO2RR in a strong acid electrolyte can overcome these shortcomings, yet the hydrogen evolution reaction (HER) greatly outcompetes the CO2RR in acidic media. Herein, CO2 reduction to HCOOH, a significant chemical intermediate in many industrial processes, was realized in strong acid (pH ≤ 1) through introducing K+ cations into the electrolyte. The K+-assisted acidic CO2RR accordingly manufactured HCOOH with a high Faradaic efficiency of 92.2% @–1.23 V RHE and a commercially relevant current density of −237.1 mA cm–2. More importantly, a high single-pass carbon efficiency of 27.4% for HCOOH production was demonstrated in acid, which exceeded the value obtained in the alkaline CO2RR. Further mechanistic studies demonstrated that K+ can engineer the local microenvironment over the Bi catalyst surface by reducing the proton coverage to suppress the competing HER and creating local interaction to stabilize the *OCOH intermediate, which ultimately promotes high-efficiency CO2 conversion to HCOOH in strong acidic media.

chemistry, physical
Strongly Coupled Ag/Sn-SnO2 Nanosheets Toward CO2 Electroreduction to Pure HCOOH Solutions at Ampere-Level Current

Min Zhang,Aihui Cao,Yucui Xiang,Chaogang Ban,Guang Han,Junjie Ding,Li-Yong Gan,Xiaoyuan Zhou

DOI: https://doi.org/10.1007/s40820-023-01264-6

2023-12-13

Abstract:Electrocatalytic reduction of CO2 converts intermittent renewable electricity into value-added liquid products with an enticing prospect, but its practical application is hampered due to the lack of high-performance electrocatalysts. Herein, we elaborately design and develop strongly coupled nanosheets composed of Ag nanoparticles and Sn-SnO2 grains, designated as Ag/Sn-SnO2 nanosheets (NSs), which possess optimized electronic structure, high electrical conductivity, and more accessible sites. As a result, such a catalyst exhibits unprecedented catalytic performance toward CO2-to-formate conversion with near-unity faradaic efficiency (≥ 90%), ultrahigh partial current density (2,000 mA cm-2), and superior long-term stability (200 mA cm-2, 200 h), surpassing the reported catalysts of CO2 electroreduction to formate. Additionally, in situ attenuated total reflection-infrared spectra combined with theoretical calculations revealed that electron-enriched Sn sites on Ag/Sn-SnO2 NSs not only promote the formation of *OCHO and alleviate the energy barriers of *OCHO to *HCOOH, but also impede the desorption of H*. Notably, the Ag/Sn-SnO2 NSs as the cathode in a membrane electrode assembly with porous solid electrolyte layer reactor can continuously produce ~ 0.12 M pure HCOOH solution at 100 mA cm-2 over 200 h. This work may inspire further development of advanced electrocatalysts and innovative device systems for promoting practical application of producing liquid fuels from CO2.
A Solid-State Electrolyte Facilitates Acidic CO2 Electrolysis without Alkali Metal Cations by Regulating Proton Transport

Bo Wu,Bingqing Wang,Beijing Cai,Chao Wu,Weng Weei Tjiu,Mingsheng Zhang,Zainul Aabdin,Shibo Xi,Yanwei Lum

DOI: https://doi.org/10.1021/jacs.4c11564

2024-10-30

Abstract:Electrochemical CO2 reduction (CO2R) in acidic media provides a pathway to curtail CO2 losses by suppressing the formation of (bi)carbonates. In such systems, a high concentration of alkali metal cations is necessary for mitigating the proton-rich environment and suppressing the competing hydrogen evolution reaction. However, a high cation concentration also promotes salt precipitation within the gas diffusion layer, resulting in poor system durability. Here, we resolve this conundrum by replacing the liquid catholyte with a solid-state proton conductor to regulate H+ transport. This is postulated to allow for a locally alkaline environment at the cathode, enabling selective CO2R even without alkali metal cations. We show that this strategy is effective over a broad range of catalyst systems. For instance, we achieve an 87% CO faradaic efficiency (FE) at 300 mA/cm2 using a composite nanoporous Au and single-atom Ni catalyst, with 0.25 M H2SO4 as the anolyte. Stable operation over 110 h and a high single-pass carbon efficiency of 82.8% were also successfully demonstrated. Importantly, we find that this solid-state system is also particularly effective at converting dilute feedstock (5% CO2) with a CO FE of 47.7%, a factor of 16.4 times higher than a conventional system. Our results introduce a simple yet effective design approach for developing efficient acidic CO2R electrolyzers.
Confinement of an Alkaline Environment for Electrocatalytic CO2 Reduction in Acidic Electrolytes

Xiaozhi Li,Peng Zhang,Lili Zhang,Gong Zhang,Hui Gao,Zifan Pang,Jia Yu,Chunlei Pei,Tuo Wang,Jinlong Gong

DOI: https://doi.org/10.1039/d3sc01040f

IF: 8.4

2023-01-01

Chemical Science

Abstract:Acidic electrochemical CO2 reduction reaction (CO2RR) can minimize carbonate formation and eliminate CO2 crossover, thereby improving long-term stability and enhancing single-pass carbon efficiency (SPCE). However, the kinetically favored hydrogen evolution reaction (HER) is generally predominant under acidic conditions. This paper describes the confinement of a local alkaline environment for efficient CO2RR in a strongly acidic electrolyte through the manipulation of mass transfer processes in well-designed hollow-structured Ag@C electrocatalysts. A high faradaic efficiency of over 95% at a current density of 300 mA cm(-2) and an SPCE of 46.2% at a CO2 flow rate of 2 standard cubic centimeters per minute are achieved in the acidic electrolyte, with enhanced stability compared to that under alkaline conditions. Computational modeling results reveal that the unique structure of Ag@C could regulate the diffusion process of OH- and H+, confining a high-pH local reaction environment for the promoted activity. This work presents a promising route to engineer the microenvironment through the regulation of mass transport that permits the CO2RR in acidic electrolytes with high performance.
Phospshoinositide 3-kinase (PI3K)/mammalian target of rapamycin (mTOR) dual inhibitors: discovery and structure-activity relationships of a series of quinoline and quinoxaline derivatives.

N. Nishimura,Aaron C. Siegmund,Longbin Liu,Kevin C Yang,M. Bryan,K. Andrews,Yunxin Y Bo,S. Booker,S. Caenepeel,Daniel J. Freeman,H. Liao,J. McCarter,E. Mullady,Tisha San Miguel,R. Subramanian

DOI: https://doi.org/10.1021/jm200386s

IF: 8.039

2011-06-20

Journal of Medicinal Chemistry

Abstract:The phosphoinositide 3-kinase (PI3K) family catalyzes the ATP-dependent phosphorylation of the 3'-hydroxyl group of phosphatidylinositols and plays an important role in cell growth and survival. There is abundant evidence demonstrating that PI3K signaling is dysregulated in many human cancers, suggesting that therapeutics targeting the PI3K pathway may have utility for the treatment of cancer. Our efforts to identify potent, efficacious, and orally available PI3K/mammalian target of rapamycin (mTOR) dual inhibitors resulted in the discovery of a series of substituted quinolines and quinoxalines derivatives. In this report, we describe the structure-activity relationships, selectivity, and pharmacokinetic data of this series and illustrate the in vivo pharmacodynamic and efficacy data for a representative compound.
Structural proteins of three viruses in the Potyviridae adhere only to their homologous cylindrical inclusions in mixed infections.

W. Langenberg

DOI: https://doi.org/10.1006/JSBI.1993.1021

IF: 3.234

1993-05-01

Journal of Structural Biology

Abstract:Immunoelectron microscopy of serial sections of leaf cells of wheat doubly infected by wheat streak mosaic virus and Agropyron mosaic virus or wheat spindle streak mosaic virus showed that structural proteins or virions associated only with homologous cylindrical inclusions (CI) or with self in aggregates. CI protein of WSMV was seen firmly attached to, and extended through, a plasmodesma. Based on CI protein similarities with transport protein families, membrane-associated secretion proteins, other transport proteins in the GTPase superfamily, and the here reported findings, it is suggested that CI proteins could serve as cell-to-cell movement proteins in the Potyviridae.
Engineering Iron Carbide Catalyst with Aerophilic and Electron-rich Surface for Improved Electrochemical CO 2 Reduction

Jing Yan,Haiyan Ma,Jiaqi Ni,Jinjin Ma,Junjie Xu,Jiaou Qi,Shufang Zhu,Lilin Lu

DOI: https://doi.org/10.1016/j.jcis.2023.06.028

IF: 9.9

2023-06-09

Journal of Colloid and Interface Science

Abstract:Highly efficient electrocatalyst for carbon dioxide reduction (CO 2 RR) is desirable for converting CO 2 into carbon-based chemicals and reducing anthropogenic carbon emission. Regulating catalyst surface to improve the affinity for CO 2 and the capability of CO 2 activation is the key to high-efficiency CO 2 RR. In this work, we develop an iron carbide catalyst encapsulated in nitrogenated carbon (SeN-Fe 3 C) with an aerophilic and electron-rich surface by inducing preferential formation of pyridinic-N species and engineering more negatively charged Fe sites. The SeN-Fe 3 C exhibits an excellent CO selectivity with a CO Faradaic efficiency (FE) of 92 % at -0.5 V (vs. RHE) and remarkably enhanced CO partial current density as compared to the N-Fe 3 C catalyst. Our results demonstrate that Se doping reduces the Fe 3 C particle size and improves the dispersion of Fe 3 C on nitrogenated carbon. More importantly, the preferential formation of pyridinic-N species induced by Se doping endows the SeN-Fe 3 C with an aerophilic surface and improves the affinity of the SeN-Fe 3 C for CO 2 . Density functional theory (DFT) calculations reveal that the electron-rich surface, which is caused by pyridinic N species and much more negatively charged Fe sites, leads to a high degree of polarization and activation of CO 2 molecule, thus conferring a remarkably improved CO 2 RR activity on the SeN-Fe 3 C catalyst.

chemistry, physical
One-Step Electrochemical Dealloying of 3D Bi-Continuous Micro-Nanoporous Bismuth Electrodes and CO2RR Performance

Wenqin Lai,Yating Liu,Mingming Zeng,Dongmei Han,Min Xiao,Shuanjin Wang,Shan Ren,Yuezhong Meng

DOI: https://doi.org/10.3390/nano13111767

2023-05-30

Abstract:The rapid development of electrochemical CO2 reduction offers a promising route to convert intermittent renewable energy into products of high value-added fuels or chemical feedstocks. However, low faradaic efficiency, low current density, and a narrow potential range still limit the large-scale application of CO2RR electrocatalysts. Herein, monolith 3D bi-continuous nanoporous bismuth (np-Bi) electrodes are fabricated via a simple one-step electrochemical dealloying strategy from Pb-Bi binary alloy. The unique bi-continuous porous structure ensures highly effective charge transfer; meanwhile, the controllable millimeter-sized geometric porous structure enables easy catalyst adjustment to expose highly suitable surface curvatures with abundant reactive sites. This results in a high selectivity of 92.6% and superior potential window (400 mV, selectivity > 88%) for the electrochemical reduction of carbon dioxide to formate. Our scalable strategy provides a feasible pathway for mass-producing high-performance and versatile CO2 electrocatalysts.
Stabilizing *CO2 Intermediates at the Acidic Interface using Molecularly Dispersed Cobalt Phthalocyanine as Catalysts for CO2 Reduction

Shijia Feng,Xiaojun Wang,Dongfang Cheng,Yao Luo,Mengxin Shen,Jingyang Wang,Wei Zhao,Susu Fang,Hongzhi Zheng,Liyao Ji,Xing Zhang,Weigao Xu,Yongye Liang,Philippe Sautet,Jia Zhu

DOI: https://doi.org/10.1002/anie.202317942

2024-01-07

Angewandte Chemie International Edition

Abstract:CO2 electroreduction (CO2R) operating in acidic media circumvents the problems of carbonate formation and CO2 crossover in neutral/alkaline electrolyzers. Alkali cations have been universally recognized as indispensable components for acidic CO2R, while they cause the inevitable issue of salt precipitation. It is therefore desirable to realize alkali-cation-free CO2R in pure acid. However, without alkali cations, stabilizing *CO2 intermediates by catalyst itself at the acidic interface poses as a challenge. Herein, we first demonstrate that a carbon nanotube-supported molecularly dispersed cobalt phthalocyanine (CoPc@CNT) catalyst provides the Co single-atom active site with energetically localized d states to strengthen the adsorbate-surface interactions, which stabilizes *CO2 intermediates at the acidic interface (pH = 1). As a result, we realize CO2 conversion to CO in pure acid with a faradaic efficiency of 60% at pH = 2 in flow cell. Furthermore, CO2 is successfully converted in cation exchanged membrane-based electrode assembly with a faradaic efficiency of 73%. For CoPc@CNT, acidic conditions also promote the intrinsic activity of CO2R compared to alkaline conditions, since the potential-limiting step, *CO2 to *COOH, is pH-dependent. This work provides a new understanding for the stabilization of reaction intermediates and facilitates the designs of catalysts and devices for acidic CO2R.

chemistry, multidisciplinary
Acidic Electrocatalytic CO2 Reduction Using Space-Confined Nanoreactors.

P. Kang,Yingying Cheng,Tao Yan,Zhikun Liu,Hui-Ying Pan,Han Shi

DOI: https://doi.org/10.1021/acsami.1c21242

2022-02-02

Abstract:Electrochemical CO2 reduction reaction (CO2RR) is an attractive strategy for sustainable production of chemicals and has mainly been implemented in alkaline or neutral electrolytes. However, part of input CO2 is consumed by the formation of carbonate under these conditions. Herein, a space-confined strategy is proposed for CO2RR in acidic media, and Ni nanoparticles are encapsulated inside N-doped carbon nanocages as yolk-shell nanoreactors. By confining CO2RR in the cavities of nanoreactors, a Faradaic efficiency (FE) of 93.2% for CO is achieved at pH 7.2 and 84.3% FE for CO at pH 2.5. The inhibited proton diffusion within the Nernst layer of a nanoreactor is responsible for suppression of competing hydrogen evolution in acid. Moreover, CO2RR in an acidic flow electrolysis system offers enhanced current density and sustainable operation, in comparison with the conventional neutral pH system. This work shows that steering of mass transport via a unique structure is a viable avenue toward selective CO2 conversion, and it provides a further understanding of the structure-performance relationship of electrocatalysts.

Chemistry,Medicine,Environmental Science,Materials Science
Modulating Electron Density of Ni-N-C Sites by N-doped Ni for Industrial-level CO2 Electroreduction in Acidic Media

Jiaji Zhang,Gaobo Lin,Jie Zhu,Sifan Wang,Wenhua Zhou,Xiangzhou Lv,Bolong Li,Jianghao Wang,Xiuyang Lu,Jie Fu

DOI: https://doi.org/10.1002/cssc.202300829

IF: 8.4

2023-12-19

ChemSusChem

Abstract:Electro-chemically reducing CO2 in a highly acidic medium is promising for addressing the issue of carbonate accumulation. However, the hydrogen evolution reaction (HER) typically dominates the acidic CO2 reduction. Herein, we construct an efficient electro-catalyst for CO formation based on a core-shell structure, where nitrogen-doped Ni nanoparticles coexist with nitrogen-coordinated Ni single atoms. The optimal catalyst demonstrates a significantly improved CO faradaic efficiency (FE) of 96.7 % in the acidic electrolyte (pH=1) at an industrial-scale current density of 500 mA cm-2 . Notably, the optimal catalyst maintains a high FE of CO exceeding 90 % (current density=500 mA cm-2 ) in the electrolyte with a wide pH range from 0.67 to 14. In-situ spectroscopic characterization and density functional theory calculations show that the local electron density of Ni-N-C sites is enhanced by N-doped Ni particles, which facilitates the formation of *COOH intermediate and the adsorption of *CO. This study demonstrates the potential of a hybrid metal/Ni-N-C interface in boosting acidic CO2 electro-reduction.
Engineering Ag-Nx Single-Atom Sites on Porous Concave N-Doped Carbon for Boosting CO2 Electroreduction.

Rui Sui,Jiajing Pei,Jinjie Fang,Xuejiang Zhang,Yufeng Zhang,Feijun Wei,Wenxing Chen,Zheng Hu,Shi Hu,Wei Zhu,Zhongbin Zhuang

DOI: https://doi.org/10.1021/acsami.1c03638

IF: 9.5

2021-01-01

ACS Applied Materials & Interfaces

Abstract:The electrochemical CO2 reduction reaction (CO2RR) offers an environmentally benign pathway for renewable energy conversion and further regulation of the environmental CO2 concentration to achieve carbon cycling. However, developing desired electrocatalysts with high CO Faradaic efficiency (FECO) at an ultralow overpotential remains a grand challenge. Herein, we report an effective CO2RR electrocatalyst that features Ag single-atom coordinated with three nitrogen atoms (Ag1-N3) anchored on porous concave N-doped carbon (Ag1-N3/PCNC), which is identified by X-ray absorption spectroscopy. Ag1-N3/PCNC shows a low CO2RR onset potential of -0.24 V, high maximum FECO of 95% at -0.37 V, and high CO partial current density of 7.6 mA cm-2 at -0.55 V, exceeding most of the previous Ag electrocatalysts. The in situ infrared absorption spectra technique proves that Ag1-N3 single-atom sites have sole linear-adsorbed CO and can easily desorb *CO species to achieve the highest CO selectivity in comparison with the corresponding counterparts. This work provides significant inspiration on boosting CO2RR by tuning the active center at an atomic level to achieve a specific absorption with an intermediate.
Advances in the Stability of Catalysts for Electroreduction of CO2 to Formic Acid

Dewen Song,Shipeng Zhang,Minjun Zhou,Mingwang Wang,Ruirui Zhu,Hui Ning,Mingbo Wu

DOI: https://doi.org/10.1002/cssc.202301719

IF: 8.4

2024-02-28

ChemSusChem

Abstract:The electroreduction of CO2 to high‐value products is a promising approach for achieving carbon neutrality. Among these products, formic acid stands out as having the most potential for industrialization due to its optimal economic value in terms of consumption and output. In recent years, the Faraday efficiency of formic acid from CO2 electroreduction has reached 90~100%. However, this high selectivity cannot be maintained for extended periods under high currents to meet industrial requirements. This paper reviews excellent work from the perspective of catalyst stability, summarizing and discussing the performance of typical catalysts. Strategies for preparing stable and highly active catalysts are also briefly described. This review may offer a useful data reference and valuable guidance for the future design of long‐stability catalysts.

chemistry, multidisciplinary,green & sustainable science & technology

Contribution to Ischemic Injury of Rat Optic Nerves by Intracellular Sodium Overload

Surface passivation for highly active, selective, stable, and scalable CO2 electroreduction

A Classification Based Approach for Root Unknown Phylogenetic Networks Under Constrained Recombination

Surface Reconstruction with a Sandwich-like C/Cu/C Catalyst for Selective and Stable CO 2 Electroreduction

Circulating levels of pregnancy zone protein: normal range and the influence of age and gender.

Anionic Ionomer: Released Surface-Immobilized Cations and an Established Hydrophobic Microenvironment for Efficient and Durable CO2-to-Ethylene Electrosynthesis at High Current over One Month

Coverage enhancement accelerates acidic CO2 electrolysis at ampere-level current with high energy and carbon efficiencies

Overcoming Low C2+ Yield in Acidic CO2 Electroreduction: Modulating Local Hydrophobicity for Enhanced Performance

Engineering the Local Microenvironment over Bi Nanosheets for Highly Selective Electrocatalytic Conversion of CO 2 to HCOOH in Strong Acid

Strongly Coupled Ag/Sn-SnO2 Nanosheets Toward CO2 Electroreduction to Pure HCOOH Solutions at Ampere-Level Current

A Solid-State Electrolyte Facilitates Acidic CO2 Electrolysis without Alkali Metal Cations by Regulating Proton Transport

Confinement of an Alkaline Environment for Electrocatalytic CO2 Reduction in Acidic Electrolytes

Phospshoinositide 3-kinase (PI3K)/mammalian target of rapamycin (mTOR) dual inhibitors: discovery and structure-activity relationships of a series of quinoline and quinoxaline derivatives.

Structural proteins of three viruses in the Potyviridae adhere only to their homologous cylindrical inclusions in mixed infections.

Engineering Iron Carbide Catalyst with Aerophilic and Electron-rich Surface for Improved Electrochemical CO 2 Reduction

One-Step Electrochemical Dealloying of 3D Bi-Continuous Micro-Nanoporous Bismuth Electrodes and CO2RR Performance

Stabilizing *CO2 Intermediates at the Acidic Interface using Molecularly Dispersed Cobalt Phthalocyanine as Catalysts for CO2 Reduction

Acidic Electrocatalytic CO2 Reduction Using Space-Confined Nanoreactors.

Modulating Electron Density of Ni-N-C Sites by N-doped Ni for Industrial-level CO2 Electroreduction in Acidic Media

Engineering Ag-Nx Single-Atom Sites on Porous Concave N-Doped Carbon for Boosting CO2 Electroreduction.

Advances in the Stability of Catalysts for Electroreduction of CO2 to Formic Acid