Abstract:X-ray detection is widely utilized in our daily life, such as in medical diagnosis, security checking, and environmental monitoring. However, most of the commercial X-ray detectors are based on inorganic semiconductors, e.g., Si, CdTe, and Ge, which require complex and costly fabrication processes. Metal halide perovskites have recently emerged as a set of promising candidates for ionizing radiation detection, owing to the high attenuation coefficient, long carrier lifetime, and excellent charge transport properties. Perovskite single crystals have been successfully implemented in X-ray detection, but the fragile single crystals limit the device fabrication and the integration with a read-out circuit. In addition, it is hard to reach inch-size single crystals for real application. Flexible devices based on perovskite films or composite films have also been reported, but either the thickness or charge transport properties are limited by the solution processes. In this work, we introduced thermal co-evaporation to deposit highly efficient formamidinium lead iodide perovskite films. Considering the trade-off between X-ray absorption and charge transport, we optimized the active layer thickness and achieved large-area and flexible X-ray detectors with state-of-the-art device performance, including extremely low dark current and noise, fast response, and high sensitivity of 142.1 μC Gyair–1 cm–2.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c20973?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c20973</a>.Photographs of the front and back of a large-area, evaporated perovskite films deposited on the flexible PET substrate; the device performance statistics of perovskite photodiodes; the J–V characteristics of multiple photodiodes and typical EQE spectra of the optimized photodiode; SEM images; the comparison of the sensitivity of the evaporated perovskite X-ray detectors with various thicknesses; the temporal response of the optimized EPXDs with active layer thickness; and the long-term device stability of the optimized EPXDs encapsulated with a cover glass (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c20973/suppl_file/am0c20973_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Vacuum‐Deposited Perovskite Photodiodes for Visible and X‐Ray Photon Detection

Dark Current In Broadband Perovskite‐Organic Heterojunction Photodetectors Controlled by Interfacial Energy Band Offset

Perovskite versus Standard Photodetectors

Sensitive, Fast, and Stable Perovskite Photodetectors Exploiting Interface Engineering

Evaporated Perovskite Thick Junctions for X-Ray Detection

Highly Sensitive Self‐Powered 2D Perovskite Photodiodes with Dual Interface Passivations

Low-noise X-ray PIN photodiodes made of perovskite single crystals by solution-processed dopant incorporated epitaxial growth

High-performance UV–visible photodetectors based on ZnO/perovskite heterostructures

High-Performance Deep Ultraviolet Photodetector Based on a One-Dimensional Lead-Free Halide Perovskite CsCu2I3 Film with High Stability.

Vapor‐Deposited Cs2AgBiCl6 Double Perovskite Films Toward Highly Selective and Stable Ultraviolet Photodetector

Halide Perovskites: A Dark Horse for Direct X‐ray Imaging

Suppressing dark current of air-processed perovskite photodetectors via manipulation of interface engineering with 2-ethyl-1-hexylamine

Emerging Perovskite Materials with Different Nanostructures for Photodetectors

Ion-exchange-induced slow crystallization of 2D-3D perovskite thick junctions for X-ray detection and imaging

Miscellaneous and Perspicacious: Hybrid Halide Perovskite Materials Based Photodetectors and Sensors

Ultrasensitive flexible broadband photodetectors achieving pA scale dark current

High Detectivity ITO/organolead Halide Perovskite Schottky Photodiodes

Microfluidic‐Assisted Growth of Perovskite Single Crystals for Photodetectors

Improvement of the perovskite photodiodes performance via advanced interface engineering with polymer dielectric

Real Time and Highly Sensitive Sub‐Wavelength 2D Hybrid Perovskite Photodetectors

Hybrid Organic–Inorganic Perovskite Photodetectors