Abstract:Hypersonic boundary layer transition using high-order methods for direct numerical simulations (DNS) is largely unexplored, although a few references exist in the literature. Experimental data in the hypersonic regime are scarce, while almost all existing hypersonic codes have low-order accuracy, which could lead to erroneous results in long-time integration and at high Reynolds numbers. Here, we focus on the transition from laminar to turbulent flow, where the Nusselt number may be five times or higher than the Nusselt number in the turbulent regime. The hypersonic flow regime must be modeled accurately using realistic chemistry to predict heat flux on the surface correctly. In this study, we simulate hypersonic boundary layer transition on a flat plate to compute the thermal and shear stresses on the wall. The domain is initialized with a laminar Blasius solution of compressible boundary layer equations. The transition to turbulence is induced using suction and blowing from a thin strip on the wall. Sponge regions are defined at the inflow and outflow boundaries to eliminate the solution contamination due to the reflections of the boundary conditions. In the spanwise direction, periodic boundary conditions are imposed. The numerical method applied here is a sixth-order compact finite difference in the interior of the domain coupled with a fourth-order Runge-Kutta time-stepping scheme for a structured Cartesian grid using staggered variables. The base finite difference code can perform simulations of non-equilibrium hypersonic flows. The numerical scheme is stabilized using the approximate deconvolution model (ADM) and artificial diffusion coefficients. We investigated the effect of non-equilibrium chemistry on the non-linear instability growth with hypersonic boundary layers. We also quantify thermal loads during the boundary layer laminar to turbulent transition for Mach number 10.

Simulation of Heat and Mass Transfer on Blunt Bodies under Aerodynamic Heating of High-Speed Aircraft

Computation of Hypersonic Transitional Flows Over Cones Using Gas-Kinetic Scheme Coupled with the Turbulence Model

Aero Heating Optimization of a Hypersonic Thermochemical Non-Equilibrium Flow around Blunt Body by Application of Opposing Jet and Blunt Spike

Numerical Study of Heat Flux Reduction Mechanism of the Counterflowing Jet in Rarefied Flows

Heat Transfer at the Nose of a High-Speed Missile

Computational Investigation of Roughness Effects on Boundary Layer Transition for Stetson's Blunt Cone at Mach 6

Modeling and Simulation of Radiation from Electronic Transitions in Hypersonic Atmospheric Reentry Flow

Numerical study on jet impingement boiling cooling of nose cone

Evaluation of Various Flow Control Methods in Reducing Drag and Aerodynamic Heating on the Nose of Hypersonic Flying Objects

Numerical Analysis of Aerodynamic Thermal Properties of Hypersonic Blunt-Nosed Body with Angles of Fire

Hypersonic Boundary Layer Transition and Heat Loading

Coupled Flow-Thermal-Structural Analysis of Hypersonic Aerodynamically Heated Cylindrical Leading Edge

Numerical Computation and Flowfield Analysis of Hypersonic Flow over a Double-Cone Body

Numerical study of film cooling scheme on a blunt-nosed body in hypersonic flow

Computational Analysis of Influence on Aero-Thermal Environments Caused by Catalytic Property Distinction of Heat Flux Sensor

Influence of lateral single jets for thermal protection of reentry nose cone with multi-row disk spike at hypersonic flow: computational study

Multiscale coupling simulation of surface catalytic effect on hypersonic aerothermodynamic environment

Numerical Analysis on the Transient Thermal Status of Aircraft

Numerical Investigation of Radiative Transfers Interactions with Material Ablative Response for Hypersonic Atmospheric Entry

Theoretical and numerical investigation of wedge and cone nose profiles at supersonic speed

Hypersonic boundary layer flow and heat transfer analysis of compressible fluid over a permeable wall with gas injection