Abstract:Grooves are used widely in aeroengines, die and moulds and other industrial contexts. Electrochemical single-pass milling (ECSPM) is a flexible method to manufacture high-aspect-ratio grooves using a simple tube tool. However, there is always a taper on the sidewall of the groove due to the dominant flow field and electric field effects in the inter-electrode gap (IEG), which reduces the machining quality. This paper develops a coupled multi-physics three-dimensional model (including turbulent flow field, electric field, heat transfer of fluid and moving mesh) to reveal the formation mechanism for these tapered sidewalls of grooves. Furthermore, a novel tube tool with a wedged end face and partial insulated layer on the outer wall (W-tube) is designed to reduce the sidewall taper by controlling the coupling of the pulsating flow and electric fields. Simulation results show that the low electrolyte flow velocity through the side IEG weakens the removal of electrolytic by-products and leads to non-uniform material removal along the groove depth, thereby forming tapered sidewalls. By using the W-tube tool, the flow and electric fields are coupled in the pulsating state, which eliminates the zones of persistent low flow velocity and disperses the material dissolution process. Also, the coupling phase difference can be controlled by adjusting the position of the insulated layer. Compared with other coupling processes, ECSPM with a coupling phase difference of 0° (type A) is more suitable for enhanced mass transfer, and the difference in dissolution overcut along the groove depth decreases to 0.015 μm in one rotation of the tube tool, thereby reducing the sidewall taper. Experimental results verify the theoretical analysis: the least-tapered groove was that manufactured with pulsating fields coupled exactly in phase, which was realized with the type-A W-tube tool; the taper was reduced to 1.21±0.10° compared to that of 2.21±0.37° with traditional ECSPM, and the surface quality was also improved.

Localized sinking electrochemical machining of pre-shaped convex structure on revolution surface using specifically designed cathode tool

Improvement on profile accuracy of convex structure during counter-rotating electrochemical machining by periodically changing electrolyte flow direction

Electrochemical machining of a rhombus hole with synchronization of pulse current and low-frequency oscillations

Formation and reduction of taper in electrochemical single-pass milling grooves

A Profile Shaping and Surface Finishing Process of Micro Electrochemical Machining for Microstructures on Microfluidic Chip Molds

Method for controlling the area of the electrolyte outlets in the flow field simulation and experimental verification of electrochemical machining

Electrochemical Machining of Curvilinear Surfaces of Revolution: Analysis, Modelling, and Process Control

Improving surface integrity of micro-holes in ECDM using ultrahigh-speed rotary of tool cathode and non-water-based electrolyte

Segmented electrochemical milling of large and difficult-to-machine curved surfaces

Fabrication of a Tool Electrode with Hydrophobic Features and Its Stray-Corrosion Suppression Performance for Micro-electrochemical Machining

Improvement on leveling ability in counter-rotating electrochemical machining by using a variable voltage

Improving flatness of machined surface in rotating cathode electrochemical milling

Simulation study on cathode structure optimization of aluminum alloy thin-walled internal spiral deep hole electrochemical machining

Using Rotary Contact Method for 5-Axis Convex Sculptured Surfaces Machining

Electrochemical cutting with flexible electrode of controlled online deformation

Analysis of electrochemical machining of involute internal spline by foamed metal cathode

Machining Surface Improvement through Electric- and Flow-Field Adjustments in Flying Electrochemical Milling of AA 2219

Novel Structure Of A Sidewall-Insulated Hollow Electrode For Micro Electrochemical Machining

Sinking ECDM micro-milling of micro-channels with a customized electrode

Scanning Micro-Electrochemical Machining Process for V-Shaped Grooves

Experimental investigation of rotary sinking electrochemical discharge milling with high-conductivity salt solution and non-pulsed direct current