Abstract:The contamination of water resources by emerging contaminants, such as heavy metals and textile effluents, poses significant ecological and human health risks. Conventional effluent treatment plants may not effectively degrade all types of pollutants, resulting in the contamination of natural water resources. Photocatalysis, specifically the photo-Fenton reaction, has emerged as an efficient sustainable cost-effective method for the removal of pollutants. In this study, three batches (CF-1, CF-2, and CF-3) of copper ferrite nanoparticles (NPs) were synthesized and used as photocatalysts for the degradation of methylene blue (MB) dye and reduction of hexavalent chromium (Cr(VI)) under visible light. The CF-1, CF-2, and CF-3 required (90, 75, and 60 min.) different periods to reach a nearly similar degradation percentage, i.e., 90%, wherein the CF-3 batch demonstrated better catalytic activity. The successful synthesis of copper ferrite NPs was confirmed by XRD analysis which reveals the CuFe 2 O 4 phase. With the increased concentration of copper, the formation of the CuO phase alongside the CuFe 2 O 4 phase was observed. The CF-3 catalyst had a surface area of 44.496 m 2 /g according to BET studies. The catalyst exhibited a pore radius of 19.175 Å and an adsorption pore volume of 0.109 cc/g, as determined by the BJH method. TEM micrographs showed spherical-shaped NPs with sizes ranging from 55 to 60 nm. The photo-Fenton process was optimized by varying dye concentration, pH, catalyst, and hydrogen peroxide (H 2 O 2 ) dosages for MB degradation. The scavenger study reveals the contribution of the •OH radical over •O 2 − radical in the photo-Fenton process for MB degradation. The reduction of Cr(VI) was optimized by adjusting pH and Cr load. The CF-3 catalyst exhibited almost complete degradation of MB (32 mg/L) within 60 min and reduction of Cr(VI) (100 mg/L) within 20 min. The good reusability of the catalyst exhibits 71.4% MB degradation after four cycles and 78.34% Cr(VI) reduction after five cycles. The regression coefficient ( R 2 ) of the pseudo-second-order reaction was close to 1 and higher than the pseudo-first-order reaction. The catalyst achieved 0.0540 and 0.1047 1/min kinetic constant at pseudo-first-order reaction, while 0.0614 and 0.0497 L/mg.min kinetic constant was achieved at pseudo-second-order reaction for MB degradation and Cr(VI) reduction. These kinetic studies proved that the dye degradation and chromium reduction follow the pseudo-second-order reaction ( R 2 ). The overall study demonstrates the promising potential of magnetic CF-3 nanoparticles as efficient catalysts for industrial applications in dye degradation and Cr(VI) reduction.

Removal of industrial dye and pharmaceutical product using the nano and micron-sized PS rough particles studded with Pt nanoparticles

Palladium nanoparticles anchored on NiO particles-modified micro-size chitosan spheres: A promising, active, and retrievable catalyst system for treatment of environmental pollutants

Fabrication of efficient bimetallic magnetic/silver nanocatalyst for the fast degradation of toxic coloring compounds from aqueous samples

Sustainable Fabrication of Hematite (Α-Fe2o3) Nanoparticles Using Biomolecules of Punica Granatum Seed Extract for Unconventional Solar-Light-driven Photocatalytic Remediation of Organic Dyes

Catalytic and kinetic studies of CuFe2O4 as a superior heterogeneous nanocatalyst for dye degradation and Cr(VI) reduction

A comparative catalytic kinetics study for exploring dye degradation potential of silver, gold and palladium nanoparticles

Magnetic Silver Nanoparticles Stabilized by Superhydrophilic Polymer Brushes with Exceptional Kinetics and Catalysis

Tribocatalytic Degradation of Organic Pollutants Using Fe 2 O 3 Nanoparticles

Degradation of Remazol Brilliant Blue Dye Using Persulfate Activated by Fe3O4@PDA Nanoparticles: Kinetic Studies, Radical Determination, and Phytotoxicity Test

Magnetically separable core-shell nanoparticles for simultaneous metal adsorption and dye degradation

Enhanced Removal of Nanoplastics from Freshwater Using In-Situ Synthesized and Anchored Nano-Fe3o4 Via Two-Step Ferrous Oxidation

Fabrication and catalytic activity of TiO2/Fe3O4 and Fe3O4/β-cyclodextrin nanocatalysts for safe treatment of industrial wastewater

Silver nanoparticles decorated magnetic polymer composites (Fe3O4@PS@Ag) as highly efficient reusable catalyst for the degradation of 4-nitrophenol and organic dyes

Catalytic Degradation of Pharmaceutical and Personal Care Products in Aqueous Solution by Persulfate Activated with Nanoscale FeCoNi-ternary Mixed Metal Oxides

Thermally synthesized hematite (α-Fe2O3) nanoparticles as efficient photocatalyst for visible light dye degradation

Au Nanoparticles Embedded on Urchin-Like Tio2 Nanosphere: an Efficient Catalyst for Dyes Degradation and 4-Nitrophenol Reduction

New Y0.045Ni0.045Fe2.91O4 nanowires decorated over mesoporous silica for crystal violet removal: Response surface methodology optimization, kinetics, and isothermal studies

Bioinspired Pd-Cu Alloy Nanoparticles as Accept Agent for Dye Degradation Performances

A Highly Stable Silver Nanoparticle Loaded Magnetic Nanocomposite as a Recyclable Catalysts

Modified magnetic Nano-Biocomposite as friendly environmental catalyst for rapid degradation of organic dyes and selective aerobic oxidation of cyclohexene through advance oxidation process

In Situ Catalysis and Extraction Approach for Fast Evaluation of Heterogeneous Catalytic Efficiency