Abstract:Pharmaceutical and personal care products (PPCPs) have been consumed in great extension and most of these are found in water bodies, owing to the inefficiency of conventional wastewater treatments. To face against these recalcitrant contaminants, advanced oxidation processes such as photocatalysis and ozonation have been studied. Moreover, the combination of these technologies can improve the degradation of PPCPs, reducing the ozone consumption and the effluent toxicity with the presence of photocatalysts. In particular, this study aimed to evaluate the effects of different N and Ce loads in co-doping TiO2 catalysts on the efficiency of photocatalytic oxidation and photocatalytic ozonation for PPCPs abatement, as well as on the resultant toxicity to aquatic species. Different radiation sources (UVA and solar radiation) were considered for the photocatalytic oxidation. A mixture of 5 PPCPs: paracetamol, sulfamethoxazole, carbamazepine, methylparaben and propylparaben was used as a model synthetic effluent. Photocatalysis showed a low efficiency on the PPCPs removal (<20 %), which was not affected by the radiation source. In general, the tested catalysts showed no or low added-value for reducing the toxicity of the synthetic effluent. Concerning photocatalytic ozonation, the lowest N amount (2.5 % w/w) promoted the best results for PPCPs removal, achieving values up to 100 % with significant reduction of ozone dose compared to photolytic ozonation. In general, photocatalytic ozonation showed better ecotoxicological performance than single photocatalysis. Compared to single photolytic ozonation, a benefitial effect was observed for two aquatic species, using a specific catalyst. This catalyst, prepared by doping TiO2 with 2.5 % w/w N and 1.2 % w/w Ce, showed to be the most promisong one, with potential to be used in photocatalytic ozonation. Hence, this work highlights the potential role of N and Ce co-doped TiO2-based catalysts in photocatalytic ozonation for wastewater treatment.

Catalytic Degradation of Pharmaceutical and Personal Care Products in Aqueous Solution by Persulfate Activated with Nanoscale FeCoNi-ternary Mixed Metal Oxides

Heterogeneous Catalytic Oxidation for the Degradation of P-Nitrophenol in Aqueous Solution by Persulfate Activated with Cufe2o4 Magnetic Nano-Particles

Enhanced efficiency of refractory organic pollutant degradation over a wide pH range by peroxymonosulfate activated by cobalt-doped FeS

PPCPs abatement using TiO2-based catalysts by photocatalytic oxidation and ozonation: The effect of nitrogen and cerium loads on the degradation performance and toxicity impact

The insight into the degradation of emerging organic pollutants by peroxydisulfate activated with Co3O4@NiO: Role of each component and catalytic mechanism

Activation of peroxymonosulfate by CuFe2O4-CoFe2O4 composite catalyst for efficient bisphenol a degradation: Synthesis, catalytic mechanism and products toxicity assessment

Activation of Peroxymonosulfate by Fe, O Co-Embedded Biochar for the Degradation of Tetracycline: Performance and Mechanisms

Degradation of Contaminants of PPCPs by Photocatalysis for Water Purification: Kinetics, Mechanisms, and Cytotoxicity Analysis

Peroxymonosulfate activation by iron-cobalt bimetallic phosphide modified nickel foam for efficient dye degradation

Fulvic acid enhanced peroxymonosulfate activation over Co-Fe binary metals for efficient degradation of emerging bisphenols

Peroxymonosulfate activated by composite ceramic membrane for the removal of pharmaceuticals and personal care products (PPCPs) mixture: Insights of catalytic and noncatalytic oxidation

High efficiency degradation of tetracycline by peroxymonosulfate activated with Fe/NC catalysts: Performance, intermediates, stability and mechanism

Efficient activation of peroxymonosulfate mediated by Co(II)-CeO2 as a novel heterogeneous catalyst for the degradation of refractory organic contaminants: Degradation pathway, mechanism and toxicity assessment

Toward a better understanding of peroxymonosulfate and peroxydisulfate activation using a nano zero-valent iron catalyst supported on graphitized carbon: Mechanisms and application to the degradation of estrogenic compounds in different water matrix

CoFe 2 O 4 /MWCNTs as peroxymonosulfate activator for sulfadiazine degradation in wastewater: Performance, mechanisms, degradation pathway, and products toxicity assessment

Enhanced activation of persulfate by magnetic NiFe2O4@CuO coupled with ultrasonic for degradation of oxytetracycline: Activation mechanism and degradation pathway

Degradation of sulfamethoxazole by cobalt-nickel powder composite catalyst coupled with peroxymonosulfate: Performance, degradation pathways and mechanistic consideration

MOF derived highly dispersed bimetallic Fe-Ni nitrogen-doped carbon for enhanced peroxymonosulfate activation and tetracycline degradation

Catalytic Degradation of Diethyl Phthalate in Aqueous Solution by Persulfate Activated with Nano-Scaled Magnetic CuFe2O4/MWCNTs

Enhancement of peroxymonosulfate activation with nickel foam-supported CuCo2O4 for tetracycline degradation: Performance and mechanism insights

Application of 3D hierarchical porous NiCo-spinel nanosheet array for enhancement of synergistic activation of peroxymonosulfate: Degradation, Intermediates, mechanism and degradation pathway of tetracycline