Abstract:Recovery stress governs the prestress strengthening effect of Fe–Mn–Si-based shape memory alloys in civil engineering applications. Although the effects of grain size, texture, and precipitates on recovery stresses have been extensively studied, the generation of recovery stress has not been thoroughly discussed regarding martensite growth behavior, especially considering the interaction of martensite variants. This study investigates the stress recovery and ε martensite growth behavior of a Fe–30Mn–6Si–5Cr (wt.%) alloy subjected to varying levels of deformation. The Fe–30Mn–6Si–5Cr (wt.%) alloy exhibits a yield strength of approximately 450 MPa, with an ultimate elongation of 44 % and a tensile strength of 950 MPa observed in uniaxial incremental cyclic tensile tests. Additionally, the results reveal an initial increase in recovery stress with pre-strain, peaking at 7 %, followed by a subsequent decrease with further deformation. With increasing pre-strain, the primary ε martensites initially grow parallelly, followed by the appearance of secondary martensites with a different orientation, intersecting multiple parallel primary martensites along with the increasing density of dislocations and stacking faults. A microstructural mechanism is proposed to elucidate the stress recovery behavior, encompassing the impact of primary martensites and secondary martensites interaction, and the influence of dislocations and stacking faults. This work offers microstructural scenarios that help to understand the generation of recovery stress and provides guidance for regulating recovery stress in Fe–Mn–Si-based shape memory alloys for civil engineering applications requiring prestress strengthening.

Larger recovery strains in cast Fe‐Mn‐Si‐based shape memory alloys by reducing thermal activation and optimizing Mn content

Stabilization of deformed stress-induced martensite and its effect on shape memory effect in an Fe-Mn-Si-Ni-Co alloy

Modulus Softening During the Γ→ɛ Martensitic Transformation in Fe–25Mn–6Si–5Cr–0.14N Alloys

Microstructural mechanism underlying the stress recovery behavior of a Fe–Mn–Si shape memory alloy

Fe–Mn–Si–Cr–Ni Based Shape Memory Alloy: Thermal and Stress-Induced Martensite

Larger recovery strains in a CoNiSi alloy due to enhanced reversibility of FCC⇌HCP martensitic transformation

IN SITU RESISTANCE ANALYSIS ON TRANSFORMATION OF CONSTRAINED Fe-Mn-Si-Cr-Ni SHAPE MEMORY ALLOY

Influence of Crystallization Conditions on the As-Cast Structure of Fe-Mn-Si Alloy with a Shape Memory Effect

Tailoring functional properties of a FeMnSi shape memory alloy through thermo-mechanical processing

Strain states and unique properties in cold-rolled TiNi shape memory alloys

Magnetic-field-induced transformation and strain in polycrystalline FeMnGa ferromagnetic shape memory alloys with high cold-workability

Large recoverable strains with high recovery rates via cooperative regulation of texture and precipitation in additive manufactured NiTi alloy

Transformation Behaviors and Superelasticity of Ti 50 Ni 48 Fe 2 Shape Memory Alloy Subjected to Cold-Rolling and Subsequent Annealing

Microstructure, Martensitic Transformation and Superelasticity of Ti49.6Ni45.1Cu5Cr0.3 Shape Memory Alloy

The shape recovery behavior of compressively deformed Fe-Mn-Si-Cr-Ni alloys

Coexistence of strain glass transition and martensitic transformation in highly nickel-rich ferroelastic alloy with large elastocaloric effect

Stress-induced detwinning/reorientation of hierarchically twinned martensite and deformation micro-mechanism in Ni52Mn27Ga17Co4 shape memory alloys: Experimental and phase-field studies

Microstructural features, martensitic transformation, and functional properties of multicomponent Ti–Ni based shape memory alloys

Dependence of shape memory effect on austenitic grain sizes in thermo-mechanical treated Fe-Mn-Si-Cr-Ni shape memory alloys

Study on the Effect of Solid Solution Treatment on the Bending Fatigue Property of Fe-Mn-Si Shape Memory Alloys

The Deformation Behavior and Microstructure Evolution of a Mn- and Cr-Containing Al-Mg-Si-Cu Alloy During Hot Compression and Subsequent Heat Treatment