Abstract:CONSPECTUS: To tackle the foreseen energy crisis and serious environmental problem caused by conventional energy resources, solar cells, or photovoltaics (PV), a technology that can directly convert sunlight to electricity has been considered to be one of the most important and cost-effective clean energy techniques that benefit the environment. So far, silicon-based PVs have dominated the market due to mature fabrication techniques and their relatively good power conversion efficiency (PCE) and excellent stability. In the past decades, metal halide perovskite PVs have been a major direction of current PV research owing to their intriguing optoelectronic performance. The record PCE of perovskite PV cells has unprecedently increased from an original 3.8 to 25.5%. The typical structure of a photovoltaic perovskite is ABX(3), where A refers to a monovalent cation such as methylammonium (MA(+)), cesium (Cs+), or formamidinium (FA(+)); B refers to a divalent cation such as Pb2+ or Sn2+; and X refers to a halide anion. In general, a perovskite PV device consists of an active layer of the perovskite absorber, which is connected by a hole-transporting layer (HTL) and an electron-transporting layer (ETL). In the beginning, the strategies to improve the PCEs mainly focused on developing an effective method to grow a smooth and continuous polycrystalline film. After the improvement of the baseline PCE of the perovskite PVs, various techniques were employed to reduce the defects of perovskite formed at grain boundaries and surfaces, further pushing the PCEs of perovskite PV devices to over 20%. In the meantime, the discovery of suitable and low-cost interfacial materials such as electron-transporting materials and hole-transporting materials has appealed to the attention of the perovskite research community to accelerate the commercialization of the perovskite PVs. In this Account, we start from our efforts to develop facile and effective fabrication strategies to obtain smooth and continuous polycrystalline perovskite thin films, including vapor-assisted and moisture-assisted perovskite crystal growth. The strategies and the in-depth mechanisms of preventing the formation of specific detrimental defects accumulated at grain boundaries or the surface are also portrayed by designing various passivation molecules with certain functional groups, such as carbonyl groups, amine groups, or sulfonic groups. Some systematically designed electron- or hole-transporting materials to improve the charge extraction and collection efficiency in perovskite PV devices are discussed as well. Finally, future perspectives for further enhancing the long-term stability and PCE are proposed to accelerate the commercialization of perovskite PV devices in the next decade.

Can the efficiencies of simplified perovskite solar cells go higher?

Simplification of Device Structures for Low-Cost, High-Efficiency Perovskite Solar Cells

Tailored Key Parameters of Perovskite for High-Performance Photovoltaics

Constructing Ultra-Shallow Near-Edge States for Efficient and Stable Perovskite Solar Cells

Towards Simplifying the Device Structure of High‐Performance Perovskite Solar Cells

Efficient Light Management In Narrow-Bandgap Perovskite Solar Cells

A Surface‐Reconstructed Bilayer Heterojunction Enables Efficient and Stable Inverted Perovskite Solar Cells

Enhancing photovoltaic efficiency: Integrating graphene and advanced interface layers to reduce the recombination losses in lead-free MASnI 3 perovskite solar cells

Efficient Semitransparent Perovskite Solar Cells for 23.0%‐efficiency Perovskite/Silicon Four‐Terminal Tandem Cells

A Multilayered Electron Extracting System for Efficient Perovskite Solar Cells

Compact Layer Free Perovskite Solar Cells with 13.5% Efficiency

Holistic Dielectric and Buffer Interfacial Layers Enable High-Efficiency Perovskite Solar Cells and Modules

Perovskite ink with wide processing window for scalable high-efficiency solar cells

Minimizing Voltage Losses via Synergistically Reducing Hetero-Interface Energy Offset for High Efficiency Perovskite Solar Cells

Monolithic Perovskite/Silicon Tandems with >28% Efficiency: Role of Silicon‐Surface Texture on Perovskite Properties

Reducing the Interfacial Energy Loss Via Oxide/perovskite Heterojunction Engineering for High Efficient and Stable Perovskite Solar Cells

One-stone-for-two-birds strategy to attain beyond 25% perovskite solar cells

Efficient Perovskite/Silicon Tandem Solar Cells on Industrially Compatible Textured Silicon

Transparent Conducting Oxide Free Backside Illuminated Perovskite Solar Cells

Simultaneous bottom-up double-layer synergistic optimization by multifunctional fused-ring acceptor with electron-deficient core for stable planar perovskite solar cells with approaching 24% efficiency

Suppressing Bulk and Interfacial Recombination Losses in Sn–Pb Perovskites for Efficient Printable Low‐Bandgap Photovoltaic Devices