Abstract:Bioaerosols generated during toilet flushing can contribute to the spread of airborne pathogens and cross-contamination in indoor environments. This presents an increased risk of fomite-mediated or aerosol disease transmission. This study systematically investigated the factors contributing to increased bioaerosol exposure following toilet flushing and developed an empirical model for predicting the exposure-relevant bioaerosol concentration. Air in a toilet cubicle was sampled by impaction after seeding with Clostridium difficile spores. Design of Experiments (DoE) main effects screening and full factorial design approaches were then employed to investigate the significant factors that heighten the risk of exposure to bioaerosols post-flush. Our findings reveal that the inoculated bacterial concentration (C), time elapsed after flushing (t), lateral distance (d), and mechanical ventilation (v) are significant predictors of bioaerosol concentration, with p-values < 0.05. The interaction term, C × d showed a marked increase in bioaerosol concentration up to 232 CFU/m3 at the closest proximity and highest pathogen load. The interplay of C and t (C × t) demonstrated a time-dependent attenuation of bioaerosol viability, with concentrations peaking at 241 CFU/m3 immediately post-flush and notably diminishing over time. The lateral distance and time post-flush (d × t) interaction also revealed a gradual decrease in bioaerosol concentration, highlighting the effectiveness of spatial and temporal dilution in mitigating bioaerosol exposure risks. Furthermore, there is an immediate rise in relative humidity levels post-flush, impacting the air quality in the toilet environment. This study not only advances our understanding of exposure pathways in determining bioaerosol exposure, but also offers pivotal insights for designing targeted interventions to reduce bioaerosol exposure. Recommendations include designing public toilets with antimicrobial surfaces, optimizing ventilation, and initiating timely disinfection protocols to prioritise surfaces closest to the toilet bowl during peak exposure periods, thereby promoting healthier indoor environments and safeguarding public health in high-traffic toilet settings.

Impact of ventilation efficiency on restraining hazardous toilet plume post-flushing in indoor environments

Numerical Comparison of the Efficiency of Mixing Ventilation and Impinging Jet Ventilation for Exhaled Particle Removal in a Model Intensive Care Unit

Ventilation reconstruction in bathrooms for restraining hazardous plume: Mitigate COVID-19 and beyond

CFD Studies on the Spread of Ammonia and Hydrogen Sulfide Pollutants in a Public Toilet under Personalized Ventilation

Emission characteristics and quantitative health risk assessment of bioaerosols in an indoor toilet after flushing under various ventilation scenarios

A theoretical study on gaseous pollutant flushing of natural ventilation driven by buoyancy forces in industrial buildings

Optimizing indoor air quality: CFD simulation and novel air cleaning methods for effective aerosol particle inhibition in public spaces

Wind tunnel tests of inter-flat pollutant transmission characteristics in a rectangular multi-storey residential building, part A: Effect of wind direction

Positive or negative? The pressure control impact in hybrid ventilated hospitals

A laboratory study of the expiratory airflow and particle dispersion in the stratified indoor environment

Numerical investigation of airborne transmission in low-ceiling rooms under displacement ventilation

Effect of particle resuspension from ventilation duct on indoor environment

Experimental study on the control effect of different ventilation systems on fine particles in a simulated hospital ward

CFD Study on the Ventilation Effectiveness in a Public Toilet under Three Ventilation Methods

Exploring toilet plume bioaerosol exposure dynamics in public toilets using a Design of Experiments approach

Experiment and numerical investigation of inhalable particles and indoor environment with ventilation system

Removal Efficiency of Restroom Ventilation Revisited for Short-Term Evaluation

Effect of recirculation zones on the ventilation of a public washroom

The airborne transmission of infection between flats in high-rise residential buildings: Tracer gas simulation

Ventilation Strategies for Mitigation of Infection Disease Transmission in an Indoor Environment: A Case Study in Office

Field Experiments to Identify and Eliminate Recirculation Zones to Improve Indoor Ventilation: Comparison with CFD