Abstract:In order to study the high-speed penetration effect of a structural projectile on a reinforced concrete target, tests of structural projectiles with high velocity penetrating into reinforced concrete target were carried out by using a 35mm-caliber ballistic gun as a launching tool, and the penetration velocity of the projectiles ranges from 1030 m/s to 1520 m/s. The test data of the deformation and failure form, remaining length and remaining mass of the projectiles were obtained through detailed measurement of the recovered projectile. The macro-damage of the targets, the penetration depth and crater size of the target bodies were also obtained. Based on the experimental data, the changes of the projectile structure response, penetration of the dimensionless crater depth, and dimensionless crater diameter with penetration velocity were analyzed. According to the deformation and destruction of the projectiles during the penetration process, the penetration depth and penetration mechanism change with penetration velocity were analyzed, and the partition of the penetration velocity was discussed. The results show that, in the penetration velocity ranges from 1030 m/s to 1390 m/s, the heads of the projectiles are eroded, and the degree of erosion increases with the increase in penetration velocity, and the penetration depth increases approximately linearly with the penetration velocity. When the penetration velocity is in the range of 1390−1480 m/s, the heads of the projectiles are severely eroded, and the penetration depth decreases as the penetration velocity increases. When the impact velocity is higher than 1480 m/s, the projectile bodies are severely broken, and the penetration depth decreases sharply as the penetration velocity increases. According to the damage characteristics of the structural projectiles during high-speed penetration, the penetration velocity is divided into rigid body penetration zone, quasi-rigid body penetration zone, eroded body penetration zone and broken body penetration zone, which can provide a reference for the structural design of ground-penetrating projectile.

Experimental and Numerical Investigation on the Explosive Characteristics of Slotted Cartridges under Different Slotted Structures

Experimental Study of Complex Slotted Charge Blasting

Study on the influence of slit pipe wall thickness on the rock breaking effect of slit charge explosion

Fractal damage and crack propagation of PMMA in multiple slit charge blasting

Study on fuze overload characteristic of high speed rocket in penetration process

Super-High Initial Velocity Mechanism of Bullet Propulsion with Adaptive Pressure-Maintaining Chamber

Study on Forming Law and Penetration of a Spherical Cone Composite Structure Liner Based on the Explosion Pressure-Coupling Constraint Principle

Experimental research on the mechanism of a high-velocity projectile penetrating into a reinforced concrete target

Finite Element Simulation and Experimental Comparison on Perforating Casing of Peroration Bullet

Comparative Study of Blast Loading on Solid and Porous Structures

Experimental Investigations On The Propagation Of The Plasma Jet In The Open Air

Experimental and Numerical Investigations on the Dynamic Fracture of a Cylindrical Shell with Grooves Subjected to Internal Explosive Loading

The Effect of Load Conditions on the Interior Ballistic Characteristics of the Metal Storm Weapon System

Experimental Study on Pressure Load of Tank Bulkhead under Penetration of Projectile

Experimental Research on the Launching System of Auxiliary Charge with Filter Cartridge Structure

Experimental and Numerical Study on the Shock Initiation of PBXC03 Explosive under the Different Loading Pressure

A model of explosion induced by friction in the process of loaded projectiles penetrating into concrete targets

Influences of air-contain structure on dynamic responses of liquid-filled structures under spherical projectile penetration

Experimental study on fragments dispersion characteristics of elliptical cross-section casing under explosive loading

Dynamic Fracture and Fragmentation Characteristics of Metal Cylinder and Rings Subjected to Internal Explosive Loading

Experimental and Simulated Study on Constant-volume Stage of Cluster Bomb Dispensing System With Center Combustion Gas