Abstract:Cellulosic substrates, including wood and thatch, have become icons for sustainable architecture and construction, however, they suffer from high flammability because of their inherent cellulosic composition. Current control measures for such hazards include applying intumescent fire-retardant (IFR) coatings that swell and form a char layer upon ignition, protecting the underlying substrate from burning. Typically, conventional IFR coatings are opaque and are made of halogenated compounds that release toxic fumes when ignited, compromising the roofing's aesthetic value and sustainability. In this work, phytic acid, a naturally occurring phosphorus source extracted from rice bran, was used to synthesize phytic acid-based fire-retardants (PFR) via esterification under reflux, along with powdered chicken eggshells (CES) as calcium carbonate (CaCO3) bio-filler. These components were incorporated into melamine formaldehyde resin to produce the transparent IFR coating. It was revealed that the developed IFR coatings achieved the highest fire protection rating based on UL94 flammability standards compared to the control. The coatings also yielded increased LOI values, indicative of self-extinguishing properties. A 17 °C elevation of the IFR coating's melting temperature and a significant ∼172% increase in enthalpy change from the control were observed, indicating enhanced fire-retardancy. The thermal stability of the coatings was improved, denoted by reduced mass losses, and increased residual masses after thermal degradation. As validated by microscopy and spectroscopy, the abundance of phosphorus and carbon groups in the coatings' condensed phase after combustion indicates enhanced char formation. In the gas phase, TG-FTIR showed the evolution of non-flammable CO2, and fire-retardant PO and P-O-C. Mechanical property testing confirmed no reduction in the adhesion strength of the IFR coating. With these results, the developed IFR coating exhibited enhanced fire-retardancy whilst remaining optically transparent, suggestive of a dual-phase IFR protective mechanism involving the release of gaseous combustion diluents and the formation of a thermally insulating char layer.

Photo‐aging deterioration of hybrid intumescent flame retarding coatings simultaneously modified by silicon aerogel, β‐cyclodextrin, and nano‐ZnO

Hybridization of the Zinc-Based Organic Framework with Diphenylfenosundinyl Chloride and Its Combination with Hexaphenoxycyclotriphosphazene for Flame Retardancy of Epoxy Resin

Fire reaction properties of polystyrene-based composites using hollow silica as synergistic agent

Synergetic modification of graphitic carbon nitride by Zr-based metal-organic framework and tetraethoxysilane for improving fire performance in composite coatings

Synergistic Smoke Suppression Effect of Epoxy Cross-Linked Structure and Ferrocene on Epoxy-Based Intumescent Flame-Retardant Coating

Enhancements on Flame Resistance by Inorganic Silicate-Based Intumescent Coating Materials

Synergistic effect of phytic acid and eggshell bio-fillers on the dual-phase fire-retardancy of intumescent coatings applied on cellulosic substrates

Synergistic modification of ZIF and silica on carbon spheres to enhance the flame retardancy of composites coatings

Phenylboronic acid-decorated ZrP nanosheets for enhancing fire resistance, smoke suppression, and water/acid/alkali tolerance of intumescent coatings

Fabrication of Ni-doped synergistic intumescent flame-retarding silicone rubber system with superior flame retardancy and water resistance

Thermal decomposed behavior and kinetic study for untreated and flame retardant treated regenerated cellulose fibers using thermogravimetric analysis

A Series of Novel Flame Retardants Produced with Nanosilica, Melamine, and Aluminum Diethylphosphinate to Improve the Flame Retardancy of Phenolic Resin

Fabrication of Polypyrrole-Decorated Tungsten Tailing Particles for Reinforcing Flame Retardancy and Ageing Resistance of Intumescent Fire-Resistant Coatings

Synergistic Flame Retardancy of Linear Low-Density Polyethylene with Surface Modified Intumescent Flame Retardant and Zinc Borate

Pyrolysis kinetics of ZrP-containing aliphatic waterborne polyurethane-based intumescent coating for flame-retarding plywood

Effect of a Triazine Ring‐containing Charring Agent on Fire Retardancy and Thermal Degradation of Intumescent Flame Retardant Epoxy Resins

Preparation of Silane Precursor Microencapsulated Intumescent Flame Retardant and Its Application in Polypropylene Composites

Influence of thermo-oxidative aging on flame retardancy, thermal stability, and mechanical properties of long glass fiber–reinforced polypropylene composites filled with organic montmorillonite and intumescent flame retardant

Fire-resistive performance of intumescent flame-retardant coatings for steel

Synergistic effect of nano silicon and piperazine pyrophosphate/melamine polyphosphate on flame retardancy of polypropylene

The encapsulation of intumescent flame retardants by poly-siloxane for thermoplastic polyolefin: Fire safety and water resistance