Abstract:Experimental techniques such as the cone calorimeter, representing realistic fire conditions, and the thermogravimetric analyser (TGA) combined with evolved gas analysis (EGA) can be used to determine flammability and degradation properties of materials. The desire is to correlate the flammability properties measured in the cone calorimeter for samples of size 100mm×100mm with those measured or deduced from TGA combined with EGA for milligram samples. Such an achievement will allow the design of fire-safe materials by quickly assessing (a) the fire safety of materials in their earliest milligram formulation and (b) the dependence of their flammability properties on the molecular structure of the material. In the present study, a cone calorimeter and TGA investigation is conducted for commercial Nordic Spruce wood impregnated by mono-ammonium phosphate (fire retardant, FR) through a vacuum pressure method. Experiments in the cone calorimeter with increasing FR concentrations indicated that (a) the char yields increased, (b) the apparent ignition temperature increased, (c) time to piloted ignition increased, (d) the total amount of heat released was reduced, (e) the peak heat release rate was reduced and (f) the carbon monoxide and smoke yields increased especially before ignition occurred. By comparison, char yields also increased with FR content in the TGA degradation experiments in nitrogen. The increase in the char yield with FR content explains quantitatively the decrease in the heat release in the cone calorimeter. By contrast, the onset temperatures measured in TGA decreased, whereas the ignition temperature deduced in the cone calorimeter increased with FR content. This difference is attributed to reduced yield of levoglucosan (reported in recent literature using TGA/EGA) with increased char yield as well as to the presence of phosphorous containing moieties in the volatiles, which both can quench piloted ignition. Finally, the TGA measurements showed that the FR concentrations decreased for milligram samples at different distances from the surface of the wood used in the cone calorimeter measurements. The variation of FR retardant with depth needs to be considered when using TGA data to interpret cone calorimeter measurements and the fire performance of the FR wood in approval tests such as the single burning item (SBI).

Thermal decomposed behavior and kinetic study for untreated and flame retardant treated regenerated cellulose fibers using thermogravimetric analysis

Study of Thermal and Mechanical Behaviors of Flame Retardant Polystyrene-Based Nanocomposites Prepared Via In-Situ Polymerization Method

A Quantitative Coupling Pyrolysis Mechanism Modeling of Flame-Retardant Composites and Their Bubbling, Breaking, Charring Behaviors

A Series of Novel Flame Retardants Produced with Nanosilica, Melamine, and Aluminum Diethylphosphinate to Improve the Flame Retardancy of Phenolic Resin

Thermal degradation behavior of low-halogen flame retardant PC/PPFBS/PDMS

Simplified structure of the condensed phase of fire retarded PA6 nanocomposites in TGA as related flammability

Thermogravimetric Analysis and Pyrolysis Kinetics of Cotton Fabrics Finished with Pyrovatex CP

Flammability assessment of fire-retarded Nordic Spruce wood using thermogravimetric analyses and cone calorimetry

Effects of novel halogen-free flame-retardant binary additives on thermal stability, degradation kinetics and flame retardancy of cotton cellulose biomacromolecule

Pyrolysis products and thermal degradation mechanism of intrinsically flame-retardant calcium alginate fibre

Pyrolysis of natural rubber–cellulose composites: isoconversional kinetic analysis based on thermogravimetric data

Photo‐aging deterioration of hybrid intumescent flame retarding coatings simultaneously modified by silicon aerogel, β‐cyclodextrin, and nano‐ZnO

Pyrolysis and combustion characterisation of HDPE/APP composites via molecular dynamics and CFD simulations

Measurement of the Kinetics and Thermodynamics of the Thermal Degradation for a Flame Retardant Polyurethane-Based Aerogel

Enhanced Thermal And Flame Retardant Properties Of Flame-Retardant-Wrapped Graphene/Epoxy Resin Nanocomposites

Characterization of thermal decomposition and combustion for commercial flame-retardant rubber floor cloth in TG–FTIR and FPA

Thermal Clegeadation Kinetics of Flame Retarded PC/ABS

Morphology of Burned Ultra-Low Density Fiberboards

Pyrolysis products and thermal degradation mechanism of intrinsically flame-retardant carrageenan fiber

Effects of collagen fiber addition on the combustion and thermal stability of natural rubber

Real-time char layer resistance monitoring for the study of expanded char layer morphology formed by IFR/SBS during combustion processes