Abstract:The addition of Mo2Ti2C3 MXene to the PI matrix enables the polymer to form a slick and stable transfer film during sliding, which helps to reduce coefficient and wear rate. This method can improve the tribological properties of PI and broaden its application field in flexible condition. Polyimide (PI) has good mechanical properties and thermal stability, while high coefficient (COF) and wear rate limit its wide application. In order to endow PI with better friction and wear resistance, Mo2Ti2C3 MXene was used as solid lubricant to prepare Mo2Ti2C3/PI nanocomposites with different content of Mo2Ti2C3. The effect of the amount of Mo2Ti2C3 on the tribological behavior of PI was explored and the tribological mechanism was also analyzed Tribological tests showed that at 1.2 wt% of Mo2Ti2C3 addition, the composite material demonstrated superior friction and wear resistance, exhibiting a 19.9% decrease in the COF and a 79.7% decrease in the wear rate compared to single PI due to the good self‐lubricating properties of Mo2Ti2C3 MXene. Moreover, Mo2Ti2C3 can also effectively assist PI to form sleek transfer films without interruption or gaps on the steel balls, resulting in a reduced friction COF and wear rate of the material. This work demonstrates that Mo2Ti2C3 MXene is an aussichtsreich additive for polymers to improve the tribological properties and broadens the applications of Mo2Ti2C3/PI composites in friction material area. Highlights Mo2Ti2C3 significantly improves the tribological performance of polyimide. The thermal properties of Mo2Ti2C3/polyimide are enhanced by the introduction of Mo2Ti2C3. The minimum coefficient of Mo2Ti2C3/PI composites was only 0.246 at the 1.2 wt% content of Mo2Ti2C3. The wear rate of Mo2Ti2C3/PI composites was decreased by 79.7% at the 1.2 wt% addition of Mo2Ti2C3. Mo2Ti2C3 promotes the establishment of tribo‐film to protect the Mo2Ti2C3/PI composites from friction.

Molecular dynamics simulation and mechanical properties study of TiO2/polyisoprene composites

Molecular Dynamics Simulation and Experimental Study of the Mechanical and Tribological Properties of GNS-COOH/PEEK/PTFE Composites

Improving the high temperature tribology of polyimide by molecular structure design and grafting POSS

Molecular Dynamics Simulation of Temperature and Ti Volume Fraction on Compressive Properties of Ti/Al Layered Composites

Mechanical, dynamic mechanical and thermal properties of TiO2 nanoparticles treatment bamboo fiber-reinforced polypropylene composites

Preparation and properties of EPDM/TiO2 composites

Tribological behavior and mechanism of Mo2Ti2C3/polyimide composite films under dry friction condition

Electrical Properties of TiO2-filled Polyimide Nanocomposite Films Prepared Via an in Situ Polymerization Process

Tribological Properties of Polyimide Composites Modified with Diamondoid Metal–Organic Frameworks

PDMS/TiO2 and PDMS/SiO2 Nanocomposites: Mechanical Properties' Evaluation for Improved Insulating Coatings

Effect of Ti particles on the LPSO phase and mechanical properties of Ti P /VW94 composites

Effect of titanium dioxide nanoparticles on the dielectric, thermal, and corrosion resistance properties of polyimide (PI) nanocomposites

Molecular Design of Recyclable Thermosetting Polyimide and Its Composite with Excellent Mechanical and Tribological Properties

Molecular Dynamic Simulation Study of Tribological Mechanism of PI Composites Reinforced by CNTs with Different Orientations

Mechanical performance of the polymer-inorganic interfaces: Molecular mechanisms and modes of failure

The study of mechanical properties of Ti3SiC2/Y TZP ceramics composites

Fabrication of tubular tissue constructs by centrifugal casting of cells suspended in an in situ crosslinkable hyaluronan‐gelatin hydrogel

2D Mo2CTx Reinforced Polyimide Nanocomposites for Enhancement of Surface Tribological Performance at Elevated Temperatures

Highly lubricating and wear‐resistant Ti3C2Tx@SiO2/PI composites based on the action of transfer film at the friction surface

Investigation on the stability, mechanism and electronic properties of rutile TiO2 via first-principle calculations

Investigation on Tribological and Thermo-Mechanical Properties of Ti 3 C 2 Nanosheets/Epoxy Nanocomposites