Abstract:In nanometer technology, static and dynamic power consumption of integrated circuits becomes almost equivalent. The problem of energy consumption, in turn, leads to the occurrence of aging and self-heating phenomena in an integrated circuit, which are the main phenomena that undermine the reliability of modern integrated circuits. Thus, nowadays, such design models of integrated circuits are proposed, in which the elements with high power consumption miss. The resistors used in the classical model of a flash analog-todigital converter are a huge source of static power consumption. On the other hand, according to the requirements set to these resistors, they must serve as a source of reference voltages of various levels in the circuit, providing stable voltage values. However, it is known that after manufacturing there are significant deviations depending on the environmental thermal vibrations and operating frequencies of the system, therefore, these circumstances in many cases limit the use of a classical flash analog-to-digital converter. In addition to the above highlighted problems, the implementation of resistors in integrated circuits requires a large area, which is also a serious problem in the field of manufacturing modern integrated circuits. The paper proposes a new model of a flash analog-to-digital converter based on inverters with different levels of supply voltages. This converter avoids the use of resistors and comparators. The proposed model allows to receive a digital signal with an amplitude of 0.8 V using an input analog signal with an amplitude of 1.8 V. It has been designed for a 14 nm process at a temperature of 25°C. The application of the proposed method allows to reduce power consumption by 7·102 times in comparison with the classical circuit with comparators and a voltage divider.

A Model Study of an All-Digital, Discrete-Time and Embedded Linear Regulator

A new modeling method for DC-DC converter based on Verilog-A

Event-triggered Robust Practical Output Regulation of Linear Systems with Non-Vanishing Measurements.

A Novel Fully On-Chip CMOS Low-Dropout Linear Regulator with Ultra Low Noise

Robust implementable regulator design of linear systems with non-vanishing measurements

Robust Implementable Regulator Design of General Linear Systems

Robust Regulator Design of General Linear Systems with Sampled Measurements

Modeling and implementation of a fully-digital integrated per-core voltage regulation system in a 28nm high performance 64-bit processor

The Design of An LDO Regulator

14.7 A Modular Hybrid LDO with Fast Load-Transient Response and Programmable PSRR in 14nm CMOS Featuring Dynamic Clamp Tuning and Time-Constant Compensation

Design of a Digital Control Fast Response Linear Regulator

The Design of An LDO Regulator [The Analog Mind]

Pre-processing Nonlinear Output Regulation with Non-Vanishing Measurements

CMOS Low-Dropout Voltage Regulator Design Trends: An Overview

Digital LDO with Time-Interleaved Comparators for Fast Response and Low Ripple

Noise Aware Fully Integrated Low Power and Low Inrush Current Fast Transient Response LDO

A MODEL OF A LOW POWER ANALOG-TO-DIGITAL CONVERTER BASED ON INVERTERS

Design Trends and Perspectives of Digital Low Dropout Voltage Regulators for Low Voltage Mobile Applications: A Review

Design and simulation of low dropout voltage regulator using 180nm technology

Small-Signal Discrete-time Modeling and Digital Control of the Bi-directional DC/DC Converters

Advanced digital control strategies for switching buck converters: A modeling perspective