Abstract:In high-performance Al-Cu-Li alloys with low Li-content, δ′-precipitates exist often by enveloping the Guinier-Preston zones and θ′-precipitates, forming so-called composite phases or precipitates. Using atomic-resolution Scanning transmission electron microscopy and energy calculations, we studied these composite phases for their interface structures and microstructure evolution in relation with the mechanical property of the alloys. It is found that all the composite phases have similar interface structures in terms of Cu-Li bonding: interfacial Li-atoms are required to occupy the second nearest neighbor sites to interfacial Cu-atoms. Two types of relations, “anti-phase” and “in-phase” relationships, exist between the two sideward δ′-precipitates in the δ′/θ′/δ′ composite precipitates, depending on the number of Cu-layers contained in the inward θ′-precipitate. Furthermore, it is shown that an “anti-phase” composite precipitate has to become an “in-phase” one when the Cu-layers in the θ′-precipitate increase by growing thick from even to odd number, and vice versa. Since thickening of the θ′-precipitates in these composite precipitates has to be accomplished through a layer-by-layer mechanism, their growth involves the switching of interface relationships with significant structure modifications (until the sideward δ′-precipitate adapts to the final optimized interface structure). As such, the coarsening of these precipitates can generally be depressed upon thermal heating, leading to fine precipitate microstructure of the alloys. It is also demonstrated by first-principles calculations that formation of the composite phases greatly lowers the total system energy, owing to significant decrement of interfacial energy as the θ′/Al interfaces are replaced by the Al/δ′/θ′/δ′/Al interfaces.

Coarsening mechanism of T1 precipitation and calculation of T1/Al interface properties in 2198 Al–Cu–Li alloys: Experimental and DFT studies

Investigation on formation mechanism of T1 precipitate in an Al-Cu-Li alloy

Minimum Interface Misfit Criterion for the Precipitation Morphologies of TCP Phases in a Ni-based Single Crystal Superalloy

First-principles study of crystal structure and stability of T1 precipitates in Al-Li-Cu alloys

Characterization and theoretical calculations of the T( Al 20 Cu 2 Mn 3 )/Al interface in 2024 alloys: TEM and DFT studies

Heterogeneous nucleation of T1 precipitates in solid solution of Al-Cu-Li alloys from Ag-rich structures: An ab initio study

Tensile Properties and Fracture Mechanism of the Ti2AlC(0001)/TiAl(111) Interface: Insights from a First-Principles Study

Formation mechanism of precipitate T1 in AlCuLi alloys

Atomic Structure of T1 Precipitates in Al–Li–Cu Alloys Revisited with HAADF-STEM Imaging and Small-Angle X-ray Scattering

First-principles Calculations of Bulk and Interfacial Thermodynamic Properties of the T1 phase in Al-Cu-Li alloys

First-principle investigation on the interfacial structure evolution of the δ'/θ'/δ' composite precipitates in Al-Cu-Li alloys

Investigation of the mechanical properties of TiC particle-reinforced Al-Cu alloys: insights into interface precipitation mechanisms and strengthening effects

Early Stages of Precipitation in Γ' Phase of a Ni–Al–Ti Model Alloy: Phase-Field and First-Principles Study

Quantitative contribution of T1 phase to the strength of Al-Cu-Li alloys

Interfacial structure evolution of the growing composite precipitates in Al-Cu-Li alloys

First principles study on heterogeneous interfaces of TiCu alloys through aluminum addition

Combined electron beam imaging and ab initio modeling of T1 precipitates in Al–Li–Cu alloys

On the shear strain associated with T 1 precipitation in Al-Cu-Li(-Mg-Ag) alloys

Characterization of precipitation in Al-Li alloy AA2195 by means of atom probe tomography and transmission electron microscopy

First principles calculations on Al/TiB 2 interfaces