Abstract:A modified mixing plane approach for steady state simulation of flow field in fully baffled biological reactor is presented and discussed. Without requiring any experimental input, this approach of dividing the vessel into suitable number of connected and disconnected zones; solving steady state equation separately in each zone and then transferring information between them, provides a computationally less intensive alternative for simulating the flow in the whole vessel. Impeller used is the standard Rushton Turbine positioned at mid-height of the reactor and simulations are carried out using standard k-epsilon turbulence model implemented in CFD code FLUENT. Meshing is done using tetrahedral elements such that mesh size gradually increases from the center to the periphery. Most of the previous simulation works present only a few aspects of the flow field with scant importance to the energy balance in the tank and near tip turbulence. In this work, complete model prediction for velocity field and turbulence parameters (near tip and in the bulk region) are validated by comparison with experimental data. As compared to previous simulation works, the results predicted by this "Differential circumferential averaging mixing plane approach" show a better qualitative and quantitative agreement with the published experimental data. A distribution of energy dissipation in various zones of vessel is presented. Also a qualitative picture of flow field and stagnant zones inside the reactor is presented and discussed. Comparison of flow characteristics for different number of baffles shows that for the present dimension of the vessel, five baffles gives maximum enhanced mixing.

Numerical Simulation on the Flow Field in High Concentration Anaerobic Reactor

Numerical Simulation of Gases over Flat Plate Using Two-Temperature Nonlinear Coupled Constitutive Relations

Numerical Analysis of the Micro-Couette Flow Using a Non-Newton–fourier Model with Enhanced Wall Boundary Conditions

Numerical Investigation on Local Non-equilibrium Flows Using a Diatomic Nonlinear Constitutive Model

Progress of the Experimental Researches and Numerical Simulations of the Flow Fields in Stirred Tanks

Numerical Investigation On Flow Generated by Invent Mixer In Full-Scale Wastewater Stirred Tank

Numerical Simulation of Gas-Liquid Two-Phase Flow in Agitator Tank of Autoclave

Numerical Simulation of Liquid-Solid Two-Phase Flow in Tubular Loop Reactor

Numerical approaches for the simulation of a real multiphase flow in a fermentation tank

Numerical Analysis of Two-Phase Flow in Gas-Stirred Reactors

Numerical simulation on low-density solid-liquid mixing process

The design of heterogeneous simulation reactor based on Fluent

Numerical simulation of 3D vortex flow for folded plate flocculation tank based on FLUENT

Numerical Simulation of Turbulent Flow and Mixing in Gas-Liquid-Liquid Stirred Tanks

A numerical treatment of radiative nanofluid 3D flow containing gyrotactic microorganism with anisotropic slip, binary chemical reaction and activation energy

Numerical Method and Its Application to Coupled System with Chemical Reaction, Fluid Flow and Heat Transfer: A Case Study of Shell-and-Tube Reactor

Numerical Simulation of Hydrodynamics in Slurry Bubble Column Reactor

Numerical Simulation on Flow Field of Swimming Pool Reactor

Numerical Simulation of Rotor-stator Mixer with Viscous Fluids

Model study on flow pattern of industrial suspended anaerobic reactor

Numerical simulation of a fully baffled biological reactor: The differential circumferential averaging mixing plane approach