Abstract:Organic electronics have attracted intensive research interest in the past decades (Chen et al., 2020; Yao et al., 2020; Tang et al., 2021). The ever-increasing demand for organic electronics calls for the development of high-performance and high-stability organic thin-film transistors (OFETs). OFETs are considered key components to fabricate flexible and printable devices for promising applications, such as flexible displays, chemical sensors, wearable devices, and radio frequency identification (RFID) tags. The design and synthesis of novel structural materials (such as semiconductors, dielectrics, electrodes, and substrates), as well as the development of efficient interface engineering strategies, would further promote the development of flexible electronics and lay the foundation for their early commercialization (Ji et al., 2019; Ji et al., 2021). Despite remarkable progress in the development of new materials and relevant applications in organic electronics, some challenges remain, not only on the design and synthesis of novel structural materials (such as π-conjugated small molecule or polymer semiconductors, dielectrics, electrodes, and substrates), but also the development of efficient interface engineering strategies, for the fabrication of high-performance and high-stability devices, and eventually the realization of commercially available products. For example: 1) The need for new π-conjugated semiconductors (small molecule or polymer semiconductors) compatible with polymer dielectric for high-performance devices; 2) The need for polymer dielectric (chemical structures, polarity effects, etc) compatible with commonly used microfabrication technologies for highly integrated miniaturized devices (such as inverter, oscillator, etc); 3) The need for low-voltage and high-currentdensity high-performance devices (new transistor design or high dielectric constant insulators); 4) The strategies for large-scale device fabrication with uniform performance (new fabrication methods); 5) The need for high-stability devices (atmospheric, thermal). This Research Topic aims to address the above-mentioned challenges, including one Editorial, one Review and five Original research. The following themes will provide some clues to promote progress in this area. First of all, a novel photoactive semiconductor (named as IDTOT-4F) with an A-π-D-π-A-type configuration is synthesized for optoelectrical device with photo response and optical memory behaviors provided by W. Huang et al. Then, the development of new efficient interface engineering strategies (electrode approach by W. Li et al.; interface modification by T. Li et al.) for high-performance organic thin-film transistors. In addition, new methods for the construction of high-performance and high-stability organic thin-film transistors and relevant optoelectronic applications, which could be listed in the review article by L. Huang et al. and original research in the paper of W. Wang et al. Finally, X. Ren and co-workers reported a low-temperature solution process to fabricate a high-k metal oxide dielectric for low-power OFET applications. Edited and reviewed by: Liming Dai, Case Western Reserve University, United States

Triboelectric Potential Powered High-Performance Organic Transistor Array

Triboelectric potential tuned dual-gate IGZO transistor for versatile sensory device

Organic Tribotronic Transistor for Contact‐Electrification‐Gated Light‐Emitting Diode

Evolution of Tribotronics: From Fundamental Concepts to Potential Uses

Triboelectric-potential Configurable MoTe 2 Homojunction for Photovoltaic Device and Logic Circuits

Triboiontronic Transistor of MoS2

Fiber-Shaped Triboiontronic Electrochemical Transistor

Editorial: High-Performance Organic Thin-Film Transistors

Mechano-Driven Logic-in-Memory with Neuromorphic Triboelectric Charge-Trapping Transistor

Sub-thermionic, ultra-high-gain organic transistors and circuits

Tribotronic Vertical Field‐Effect Transistor Based on van der Waals Heterostructures

InSe Tribotronic Transistors: Low‐Voltage Operational, Low‐Power Consuming, and High Sensitive Tactile Switch Based on 2D Layered InSe Tribotronics (adv. Funct. Mater. 19/2019)

Flexible Organic Tribotronic Transistor for Pressure and Magnetic Sensing

Tribotronics: an Emerging Field by Coupling Triboelectricity and Semiconductors

Organic transistor‐based integrated circuits for future smart life

Molecular design strategies for high‐performance organic electrochemical transistors

Revamping Triboelectric Output by Deep Trap Construction

Materials design and applications of n-type and ambipolar organic electrochemical transistors

High-performance Organic Thin-film Transistors: Principles and Strategies

High-performance and multifunctional organic field-effect transistors

Progress in Triboelectric Materials: Toward High Performance and Widespread Applications